NACE-CIP2-001 PDF問題集で2024年07月03日試験問題 有効なNACE-CIP2-001問題集
究極のNACE-CIP2-001準備ガイドで無料最新のNACE練習テスト問題集
NACE-CIP2-001（コーティング検査員レベル2）試験は、鋼構造物のコーティングを検査する個人の知識、技能、能力をテストするために設計された認定試験です。この試験は、腐食防止と制御の分野で教育と認定を提供する非営利団体であるNACE Internationalによって実施されています。コーティング検査員レベル2認定は、コーティング検査の能力の基準として世界的に認められており、石油・ガス、海洋、建設産業の雇用主から高く評価されています。
質問 # 40
Application of Thermal Spray Coatings requires:
- A. The same skills as liquid coatings
- B. The same skills as welding
- C. Specialized skills supported by training and experience
- D. No particular skills
正解：C
質問 # 41
When performing testing in accordance with ASTM D 2583 the inspector may observe:
- A. Cohesion failure
- B. Adhesion failure
- C. Cold flow or creep
- D. Glue failure
正解：C
質問 # 42
It is always possible to see moisture on a steel substrate:
- A. True
- B. False
正解：B
質問 # 43
Inspectors perform tests on linings that they may not perform on exterior coatings because
- A. linings protect the contents and the container.
- B. linings are more durable than coatings.
- C. coatings are expected to degrade over time.
- D. coatings are more durable than linings.
正解：A
質問 # 44
You can use magnifiers to examine all of the following EXCEPT
- A. Blisters
- B. Surface cleanliness
- C. Mill scale
- D. Surface profile
正解：B
質問 # 45
When using a destructive Paint Inspection Gauge the NACE inspector must:
- A. Determine the Dry Film Thickness of the coating prior to use
- B. Select the appropriate hand wheel based on the measured Dry Film Thickness prior to us
- C. Ensure the glue on the dolly is properly applied prior to use
- D. Consult SSPC Guide 1 prior to use
正解：A
質問 # 46
You should bulk store coatings containing isocyanates
- A. in a refrigerated warehouses
- B. wherever it is convenient
- C. in a heated warehouse.
- D. in a well ventilated area separate from the work place.
正解：D
質問 # 47
Differences in technique for abrasive blasting concrete versus steel require the operator to:
- A. Lower the blast pressure
- B. a), b) and c)
- C. Increase the standoff distance
- D. Move the nozzle quicker
正解：B
質問 # 48
When performing an adhesion test in accordance with ASTM D 3359 where the Dry Film Thickness is approximately 10 mils, the Inspector should use:
- A. Method B - X cut
- B. Method B - Cross Hatch
- C. Method A - Cross Hatch
- D. Method A - X Cut
正解：D
質問 # 49
Measuring methyl ethyl ketone (MEK) resistance of ethyl silicate inorganic zinc-rich primers by solvent rub requires
- A. 25 single rubs with a saturated cloth.
- B. 35 single rubs with a saturated cloth.
- C. 50 double rubs with a saturated cloth.
- D. 25 double rubs with a saturated cloth.
正解：C
質問 # 50
When a coating is expected to be exposed to temperatures above 93C (200 F) the best choice would be:
- A. Polyurea
- B. Inorganic Coatings
- C. Latex
- D. Organic coatings
正解：B
質問 # 51
When completing the Final Inspection report the Inspector should write the report using:
- A. Language that another NACE Inspector would understand
- B. Language that only technical experts would understand
- C. Language that only in the project would understand
- D. Language that the most would understand
正解：D
質問 # 52
When environmental enclosures are being used an inspector needs to be concerned about:
- A. Air changes
- B. Structural integrity
- C. a), b), and c)
- D. Lighting
正解：C
質問 # 53
You are working as the only in-house NACE Level 2 Inspector in a shop setting when an independent 3 rd party NACE Level 3 Inspector, representing the owner, presents you with a copy of a Non Conformance Report (NCR) he has written for a NACE2/SSPC SP 10 centrifugal blast which you had previously approved.
Your FIRST preferred course of action is to:
- A. Consult your supervisor
- B. Review the NCR with the other Inspector
- C. Verbally challenge the NCR
- D. Request a re-blast of the item in question
正解：A
質問 # 54
The best choice of instrument for holiday testing of thick film concrete coatings is:
- A. High Voltage AC
- B. Low Voltage Sponge Type
- C. High Voltage DC Constant Current
- D. High Voltage DC Pulse Type
正解：C
質問 # 55
The number of air turns in an enclosure can be affected by all of these EXCEPT
- A. type of dehumidification equipment (refrigerant or desiccant).
- B. manufacturer of the equipment.
- C. coating type.
- D. time of the year (winter/summer).
正解：C
質問 # 56
The solvent sensitivity/solvent wipe test (ASTM D4752) is used to determine the cure of
- A. epoxies.
- B. powder coatings.
- C. inorganic zincs.
- D. urethanes.
正解：C
質問 # 57
On pipelines, which coating is identifiable by its distinct colors, usually light blue, green, or grey?
- A. Liquid epoxies
- B. Heat-shrink sleeves
- C. Coal Tar Enamel
- D. Concrete
正解：A
質問 # 58
Coating Surveys are legally required:
- A. On high pressure gas lines and fireproofed structures
- B. On food and beverage vessels and can linings
- C. On water tanks and potable water pipelines
- D. On commercial marine vessels and offshore platforms
正解：D
質問 # 59
NACE Standards include:
- A. Standard Practices
- B. Material Requirements
- C. a) only
- D. a) & b)
正解：D
質問 # 60
Surface preparation methods for Non-ferrous metals are:
- A. The same as for Ferrous metals
- B. The same for all Non-FetT0us metals
- C. Not required
- D. Specific for each type of Non-ferrous metal
正解：D
質問 # 61
......
合格率 取得する秘訣はNACE-CIP2-001認定試験エンジンPDF：https://jp.fast2test.com/NACE-CIP2-001-premium-file.html
今すぐ試そう！高評価NACE NACE-CIP2-001試験問題集：https://drive.google.com/open?id=1Dek76PiTzVjl4kDh2PBspIYIj6nJIq-o