無料で使えるNACE-CIP2-001サンプル問題で100%カバー率のリアル試験問題（更新された100問あります)
今すぐダウンロード！リアルNACE NACE-CIP2-001試験問題集テストエンジン試験問題
質問 # 16
The primary purpose of Fireproofing coatings are to provide:
- A. Preferential fuel for the fire
- B. Explosion resistance
- C. fire extinguishing characteristics
- D. Temporary protection for the structure
正解：D
質問 # 17
As a NACE Level 2 Inspector on a field job; prior to submission your documentation should always reviewed and approved by:
- A. A NACE Level 1 Inspector
- B. Another NACE Level 2 Inspector
- C. A NACE Level 3 Inspector
- D. A NACE Protective Coating Specialist
正解：C
質問 # 18
Surface preparation methods for Non-ferrous metals are:
- A. The same as for Ferrous metals
- B. Not required
- C. Specific for each type of Non-ferrous metal
- D. The same for all Non-FetT0us metals
正解：C
質問 # 19
In powder coatings, when the particles of powder begin to flow but are not fully liquid, they are in what stage?
- A. Flow stage
- B. Cure stage
- C. Gel stage
- D. Wetting stage
正解：A
質問 # 20
When working with someone who is very concerned about Stability and maintaining adherence to the status-quo, the Inspector should try to:
- A. Make sure they are the center of attention in all site meetings
- B. Challenge their value to the team and try to get them out of their comfort zone
- C. Implement immediate to get them motivated
- D. Give them as much advance notice as possible about upcoming changes
正解：D
質問 # 21
In the event of a conflict between the Product Data Sheet and the Specification:
- A. It is up to the Applicator to decide which one to follow
- B. It is up to the Inspector to decide which one to follow
- C. The Product Data Sheet prevails
- D. The Specification prevails
正解：D
質問 # 22
Differences in technique for abrasive blasting concrete versus steel require the operator to:
- A. a), b) and c)
- B. Lower the blast pressure
- C. Increase the standoff distance
- D. Move the nozzle quicker
正解：A
質問 # 23
Because a NACE Level 2 Inspector has been trained in specific destructive tests, it is up to the Inspector to decide if and when a destructive test is required.
- A. False
- B. True
正解：A
質問 # 24
It is always possible to see moisture on a steel substrate:
- A. False
- B. True
正解：A
質問 # 25
The Inspectors' goal at the Pre-Job Conference is to:
- A. Take accurate meeting minutes for distribution
- B. Obtain a clear understanding of the Specification
- C. Manage the meeting so it doesn't go off topic
- D. Discuss contractual requirements
正解：B
質問 # 26
Coating surveys may include which steps?
Select All That Apply:
- A. Schedule the remedial work
- B. Evaluate the coatings performance
- C. Summarize the collected data
- D. Develop a survey plan
正解：A、B、C、D
質問 # 27
Application of Thermal Spray Coatings requires:
- A. No particular skills
- B. The same skills as liquid coatings
- C. The same skills as welding
- D. Specialized skills supported by training and experience
正解：D
質問 # 28
WJ-1 is always performed using UHWJ at pressures above 210 MPa (30,000 PSI)
- A. False
- B. True
正解：B
質問 # 29
Inspection and Test Plans are provided to:
- A. So the Inspector doesn't have to read the entire specification
- B. Outline the inspection steps, sequencing and pass/fail criteria
- C. So the contractor has a single document to reference
- D. To supersede the requirements of the product data sheets
正解：B
質問 # 30
Examples of non-ferrous metals include
Select All that Apply:
- A. aluminum
- B. mild steel.
- C. iron
- D. copper
正解：A、D
質問 # 31
You are the new NACE Level 2 Inspector on a job which had been very problematic. The previous Inspector was fired duo to personality conflicts with the Contractor's supervisor. Upon arriving onsite the Contractor's supervisor advises you in no uncertain terms that you will be the next to go, unless you cooperate with him.
Your FIRST preferred course of action is to:
- A. Defend the previous inspector
- B. Express a willingness to work with the site team and follow the specification
- C. Suggest to the Owner that the supervisor should be removed from site
- D. Challenge the supervisor's authority
正解：B
質問 # 32
When performing a hardness test on a coating which has elastic properties the inspector is likely to likely to observe:
- A. A very high reading
- B. A very low reading
- C. Cold flow or creep
- D. No difference from any other coating
正解：C
質問 # 33
The main reason dehumidification is used during coating operations is to
- A. reduce the possibility of missing the recoat window.
- B. control the environment
- C. allow the contractor to guarantee the completion date.
- D. avoid repetitive blasting/coating operations.
正解：B
質問 # 34
Which type of pipelines collect the gas from the transmission system so utility companies can distribute the gas to end users?
- A. Gathering
- B. Transmission
- C. Midstream
- D. Distribution
正解：D
質問 # 35
......
最新NACE-CIP2-001テスト問題集を試そう！更新されたNACE試験が合格できます：https://jp.fast2test.com/NACE-CIP2-001-premium-file.html
検証済み！NACE-CIP2-001問題集と解答でNACE-CIP2-001テストエンジン正確解答付き：https://drive.google.com/open?id=1Dek76PiTzVjl4kDh2PBspIYIj6nJIq-o