[2024年10月] 練習で合格させる問題学習ガイドは NACE-CIP2-001 試験問題集 [Q27-Q48]

[2024年10月] 問題集練習試験問題学習ガイドはNACE-CIP2-001試験合格させます

NACE-CIP2-001問題集には練習試験問題解答

NACE-CIP2-001認定試験は、塗装検査の原則と技術を徹底的に理解することが必要な厳密で難しいテストです。候補者は、筆記試験と実技試験の両方を組み合わせて、知識とスキルを証明することが必要です。

NACE-CIP2-001認定を取得することは、塗料産業における高度な専門知識とプロフェッショナリズムを証明します。認定を受けた個人は、コーティングプロジェクトを効果的に管理および検査し、業界標準と規制に準拠していることを確認する必要があるスキルと知識を持っていると認められています。この認定は、塗料産業の雇用主から高く評価され、キャリアアップの機会や収益増加の可能性をもたらす場合があります。

質問 # 27
When completing the Final Inspection report the Inspector should write the report using:

A. Language that only in the project would understand
B. Language that only technical experts would understand
C. Language that another NACE Inspector would understand
D. Language that the most would understand

正解：D

質問 # 28
Inspection and Test Plans are provided to:

A. So the contractor has a single document to reference
B. To supersede the requirements of the product data sheets
C. So the Inspector doesn't have to read the entire specification
D. Outline the inspection steps, sequencing and pass/fail criteria

正解：D

質問 # 29
You should bulk store coatings containing isocyanates

A. in a refrigerated warehouses
B. in a heated warehouse.
C. wherever it is convenient
D. in a well ventilated area separate from the work place.

正解：D

質問 # 30
You are working as the only in-house NACE Level 2 Inspector in a shop setting when an independent 3 rd party NACE Level 3 Inspector, representing the owner, presents you with a copy of a Non Conformance Report (NCR) he has written for a NACE2/SSPC SP 10 centrifugal blast which you had previously approved.
Your FIRST preferred course of action is to:

A. Review the NCR with the other Inspector
B. Verbally challenge the NCR
C. Request a re-blast of the item in question
D. Consult your supervisor

正解：D

質問 # 31
Inspectors perform tests on linings that they may not perform on exterior coatings because

A. coatings are more durable than linings.
B. linings are more durable than coatings.
C. linings protect the contents and the container.
D. coatings are expected to degrade over time.

正解：C

質問 # 32
When ASIN D 3363 is specified the Inspector must:

A. Record the two end points identified in the standard
B. Use the correct solvent
C. Record the percentage of failure
D. Record the highest value attained

正解：A

質問 # 33
Measuring methyl ethyl ketone (MEK) resistance of ethyl silicate inorganic zinc-rich primers by solvent rub requires

A. 50 double rubs with a saturated cloth.
B. 25 double rubs with a saturated cloth.
C. 25 single rubs with a saturated cloth.
D. 35 single rubs with a saturated cloth.

正解：A

質問 # 34
You can use magnifiers to examine all of the following EXCEPT

A. Blisters
B. Surface cleanliness
C. Surface profile
D. Mill scale

正解：B

質問 # 35
Generally for safety considerations, waterjetting hose connections use

A. an oil/water separator.
B. filters.
C. a whip-lock device.
D. a long wand.

正解：C

質問 # 36
Surface preparation of concrete is performed using:

A. Methods that are exactly the same as steel
B. Methods that have been modified for concrete
C. Methods that are completely different to steel
D. Methods that are the same as wood

正解：B

質問 # 37
It is always possible to see moisture on a steel substrate:

A. True
B. False

正解：B

質問 # 38
You are the NACE Inspector on a project where a stationary floating structure is being coated and you notice a self-smoothing anti-fouling coating has been specified.
This is not a good choice because:

A. The floating structure is stationary
B. It contains biocide
C. It doesn't contain biocide
D. It will result in a very slippery surface

正解：B

質問 # 39
You are the NACE Coating Inspector on a tank lining project and are asked to perform a high voltage holiday test after the coating applicators have completed their final repairs. After meeting all the confined space entry permit you enter the tank and notice a very strong odor of solvent.
Your first course of action should to:

A. Exit the tank and document the incident in your daily report
B. Exit the tank and immediately and report the problem to the nearest safety supervisor
C. Investigate to find the source of the odor
D. Don your air supplied respirator and continue the testing

正解：B

質問 # 40
Because a NACE Level 2 Inspector has been trained in specific destructive tests, it is up to the Inspector to decide if and when a destructive test is required.

A. True
B. False

正解：B

質問 # 41
You are working as an inspector in a galvanizing plant for the first time.
What are some of the hazards you need to be aware of:

A. Risk of acid or caustic splashes
B. a), b), and c)
C. Risk of skin
D. Risk of chemical exposure

正解：B

質問 # 42
You are the NACE Level 2 Inspector with the final responsibility to prepare the final report for a very large structural steel shop project which has gone very well. It is due next week. The work has been ongoing for two years and several NACE Level 1 Inspectors have worked under your supervision throughout the project. You find you are missing one week of daily reports for the night shift from the very beginning of the project and despite your best efforts they are cannot found.
You FIRST preferred course of action is to:

A. Re-create the reports as not much was going on during night shift anyway
B. Plainly state in your report that they are missing
C. Do not complete your report until they can be found
D. Use creative writing to cover over the fact they are missing

正解：B

質問 # 43
Differences in technique for abrasive blasting concrete versus steel require the operator to:

A. a), b) and c)
B. Lower the blast pressure
C. Move the nozzle quicker
D. Increase the standoff distance

正解：A

質問 # 44
All of these are advantages of using repair patches EXCEPT

A. excellent abrasion resistance.
B. special tools or equipment are required.
C. barrier to moisture and corrosion.
D. inert to common acids, alkalis, and solvents.

正解：B

質問 # 45
Galvanizing performs best in which of the following exposures:

A. pH above 12
B. pH between 5-10
C. pH of 13
D. pH below 4

正解：B

質問 # 46
NACE International Standards are developed by:

A. International mandates
B. Regional mandates
C. Government mandates
D. Standard committees

正解：D

質問 # 47
You are the NACE Level 2 Coating Inspector where SSPC PA 2 has been specified with an additional requirement that no individual gauge reading shall be below a certain value.
As this is not part of the standard you should: