あなたを余裕でSPLK-2003試験合格させます！100%試験高合格率保証 [2023]
SPLK-2003問題集本日限定！無料アクセスが可能に！fromFast2test
質問 # 31
In this image, which container fields are searched for the text "Malware"?
- A. Event Name and Artifact Names.
- B. Event Name or ID.
- C. Event Name, Notes, Comments.
正解：A
質問 # 32
Which of the following can be configured in the ROl Settings?
- A. Annual analyst salary.
- B. Number of full time employees (FTEs).
- C. Analyst hours per month.
- D. Time lost.
正解：B
解説：
Explanation
The correct answer is C because the number of full time employees (FTEs) is one of the settings that can be configured in the Return on Investment (ROI) Settings page. This setting is used to calculate the ROI metrics based on the number of analysts in the organization. The answer A is incorrect because the analyst hours per month is not a configurable setting, but a calculated metric based on the FTEs and the average hours per month. The answer B is incorrect because the time lost is not a configurable setting, but a calculated metric based on the number of incidents and the average time lost per incident. The answer D is incorrect because the annual analyst salary is not a configurable setting, but a calculated metric based on the FTEs and the average salary per analyst. Reference: Splunk SOAR Admin Guide, page 131.
質問 # 33
During a second test of a playbook, a user receives an error that states: 'an empty parameters list was passed to phantom.act()." What does this indicate?
- A. The container has artifacts not parameters.
- B. The playbook is using an incorrect container.
- C. The playbook debugger's scope is set to new.
- D. The playbook debugger's scope is set to all.
正解：C
解説：
Explanation
The correct answer is C because the error message indicates that the playbook debugger's scope is set to new.
The scope option determines which containers are used for debugging the playbook. If the scope is set to new, the debugger will only use containers that are created after the debugger is started. If the scope is set to all, the debugger will use all containers that match the playbook's filter criteria. The error message means that the debugger did not find any new containers with parameters to pass to the phantom.act() function. See Splunk SOAR Documentation for more details.
質問 # 34
When is using decision blocks most useful?
- A. When evaluating complex, multi-value results or artifacts.
- B. When processing different data in parallel.
- C. When modifying downstream data hi one or more paths in the playbook.
- D. When selecting one (or zero) possible paths in the playbook.
正解：D
解説：
Explanation
Decision blocks are most useful when selecting one (or zero) possible paths in the playbook. Decision blocks allow the user to define one or more conditions based on action results, artifacts, or custom expressions, and execute the corresponding path if the condition is met. If none of the conditions are met, the playbook execution ends. Decision blocks are not used for processing different data in parallel, evaluating complex, multi-value results or artifacts, or modifying downstream data in one or more paths in the playbook. Reference, page 15.
質問 # 35
What is the main purpose of using a customized workbook?
- A. Workbooks apply service level agreements (SLAs) to containers and monitor completion status on the ROI dashboard.
- B. Workbooks may not be customized; only default workbooks are permitted within Phantom.
- C. Workbooks automatically implement a customized processing of events using Python code.
- D. Workbooks guide user activity and coordination during event analysis and case operations.
正解：B
質問 # 36
When working with complex data paths, which operator is used to access a sub-element inside another element?
- A. :(colon)
- B. !(pipe)
- C. *(asterisk)
- D. .(dot)
正解：D
解説：
Explanation
The correct answer is D because the dot (.) operator is used to access a sub-element inside another element when working with complex datapaths. For example, if the datapath is container['artifacts'][0]['cef']['sourceAddress'], the dot operator is used to access the sourceAddress sub-element inside the cef element. The answer A is incorrect because the pipe (!) operator is used to chain multiple filters or functions when working with complex datapaths. For example, if the datapath is container['artifacts'][0]['cef']['sourceAddress']!startswith('10.'), the pipe operator is used to apply the startswith function to the sourceAddress element. The answer B is incorrect because the asterisk (*) operator is used to iterate over all the elements of an array when working with complex datapaths. For example, if the datapath is container['artifacts'][*]['cef']['sourceAddress'], the asterisk operator is used to access the sourceAddress element of all the artifacts in the container. The answer C is incorrect because the colon (:) operator is used to specify a range of elements in an array when working with complex datapaths. For example, if the datapath is container['artifacts'][0:5]['cef']['sourceAddress'], the colon operator is used to access the sourceAddress element of the first five artifacts in the container. Reference: Splunk SOAR Playbook Development Guide, page 28.
質問 # 37
During a second test of a playbook, a user receives an error that states: 'an empty parameters list was passed to phantom.act()." What does this indicate?
- A. The container has artifacts not parameters.
- B. The playbook is using an incorrect container.
- C. The playbook debugger's scope is set to new.
- D. The playbook debugger's scope is set to all.
正解：C
解説：
Explanation
The correct answer is C because the error message indicates that the playbook debugger's scope is set to new.
The scope option determines which containers are used for debugging the playbook. If the scope is set to new, the debugger will only use containers that are created after the debugger is started. If the scope is set to all, the debugger will use all containers that match the playbook's filter criteria. The error message means that the debugger did not find any new containers with parameters to pass to the phantom.act() function. See Splunk SOAR Documentation for more details.
質問 # 38
How can the debug log for a playbook execution be viewed?
- A. In Administration > System Health > Playbook Run History, select the playbook execution entry, then select Log.
- B. On the Investigation page, select Debug Log from the playbook's action menu in the Recent Activity panel.
- C. Click Expand Scope m the debug window.
- D. Open the playbook in the Visual Playbook Editor, and select Debug Logs in Settings.
正解：C
質問 # 39
Which of the following applies to filter blocks?
- A. Can select containers by seventy or status.
- B. Can select which blocks have access to container data.
- C. Can select assets by tenant, approver, or app.
- D. Can be used to select data for use by other blocks.
正解：D
解説：
Explanation
The correct answer is C because filter blocks can be used to select data for use by other blocks. Filter blocks can filter data from the container, artifacts, or custom lists based on various criteria, such as field name, value, operator, etc. Filter blocks can also join data from multiple sources using the join action. The output of the filter block can be used as input for other blocks, such as decision, format, prompt, etc. See Splunk SOAR Documentation for more details.
質問 # 40
Phantom supports multiple user authentication methods such as LDAP and SAML2. What other user authentication method is supported?
- A. SAML3
- B. OpenID
- C. PIV/CAC
- D. Biometrics
正解：C
解説：
Explanation
The correct answer is B because Phantom supports PIV/CAC as another user authentication method besides LDAP and SAML2. PIV/CAC stands for Personal Identity Verification (PIV) or Common Access Card (CAC) and is a smart card that can be used to authenticate users to Phantom. SAML3 is not a valid authentication method. Biometrics and OpenID are not supported by Phantom. See Splunk SOAR Documentation for more details.
質問 # 41
Which of the following is the complete list of the types of backups that are supported by Phantom?
- A. Full, delta, and incremental backups.
- B. Full and incremental backups.
- C. Full and delta backups.
- D. Full backups.
正解：C
解説：
Explanation
The correct answer is D because the Splunk SOAR product supports two types of backups: full and delta. A full backup is a complete backup of the entire Splunk SOAR system, including the configuration, data, and files. A delta backup is a partial backup of the Splunk SOAR system, which only includes the changes that have occurred since the last full backup. The answer A is incorrect because the Splunk SOAR product supports more than one type of backup. The answer B is incorrect because the Splunk SOAR product does not support incremental backups, which are backups of the changes that have occurred since the last backup of any type. The answer C is incorrect because the Splunk SOAR product does not support incremental backups, which are backups of the changes that have occurred since the last backup of any type. Reference: Splunk SOAR Admin Guide, page 67.
質問 # 42
After enabling multi-tenancy, which of the Mowing is the first configuration step?
- A. Select the associated tenant artifacts.
- B. Configure the default tenant.
- C. Set default tenant base address.
- D. Change the tenant permissions.
正解：D
質問 # 43
How is it possible to evaluate user prompt results?
- A. Set action_result. summary. response to required.
- B. Add a decision Mode
- C. Set action_result.summary. status to required.
- D. Set the user prompt to reinvoke if it times out.
正解：D
質問 # 44
Which of the following is the complete list of the types of backups that are supported by Phantom?
- A. Full and delta backups.
- B. Full, delta, and incremental backups.
- C. Full and incremental backups.
- D. Full backups.
正解：C
質問 # 45
What is the simplest way to pass data between playbooks?
- A. Artifacts
- B. File system
- C. KV Store
- D. Action results
正解：B
質問 # 46
What do assets provide for app functionality?
- A. Assets provide location, credentials, and other parameters needed to run actions.
- B. Assets provide hostnames, passwords, and other artifacts needed to run actions.
- C. Assets provide Python code, REST API, and other capabilities needed to run actions.
- D. Assets provide firewall, network, and data sources needed to run actions.
正解：A
質問 # 47
What does a user need to do to have a container with an event from Splunk use context-aware actions designed for notable events?
- A. Include the event_id field in the search results and add a CEF definition to Phantom for event_id, datatype splunk notable event id.
- B. Add a custom field to the container named event_id and set the custom field's data type to splunk notable event id.
- C. Rename the event_id field from the notable event to splunkNotableEventld.
- D. Include the notable event's event_id field and set the artifacts label to aplunk notable event id.
正解：D
解説：
Explanation
The correct answer is A because to have a container with an event from Splunk use context-aware actions designed for notable events, you need to include the notable event's event_id field and set the artifact's label to splunk notable event id. Context-aware actions are actions that are specific to a certain type of artifact, such as Splunk notable events, Jira tickets, ServiceNow incidents, etc. To use context-aware actions, you need to label the artifacts with the appropriate type and include the required fields. For Splunk notable events, the required field is event_id, which is the unique identifier of the event in Splunk. See Splunk SOAR Documentation for more details.
質問 # 48
What are the differences between cases and events?
- A. Case: potential threats.
Events: identified as a specific kind of problem and need a structured approach. - B. Cases: incidents with a known violation and a plan for correction.
Events: occurrences in the system that may require a response. - C. Cases: only include high-level incident artifacts.
Events: only include low-level incident artifacts. - D. Cases: contain a collection of containers.
Events: contain potential threats.
正解：A
質問 # 49
Which of the following expressions will output debug information to the debug window in the Visual Playbook Editor?
- A. phantom.debug()
- B. phantom.print ()
- C. phantom.assert()
- D. phantom.exception()
正解：C
質問 # 50
After enabling multi-tenancy, which of the Mowing is the first configuration step?
- A. Change the tenant permissions.
- B. Select the associated tenant artifacts.
- C. Configure the default tenant.
- D. Set default tenant base address.
正解：C
解説：
Explanation
The correct answer is D because the first configuration step after enabling multi-tenancy is to configure the default tenant. Multi-tenancy is a feature that allows you to create multiple logical partitions of Phantom data and assets for different groups of users. The default tenant is the tenant that is created when Phantom is installed and contains all the existing data and assets. You need to configure the default tenant's name, description, base address, and logo before creating other tenants. See Splunk SOAR Documentation for more details.
質問 # 51
Which Phantom API command is used to create a custom list?
- A. phantom.new_list()
- B. phantom.add_list()
- C. phantom.include_list()
- D. phantom.create_list()
正解：D
解説：
Explanation
The Phantom API command to create a custom list is phantom.create_list(). This command takes a list name and an optional description as parameters and returns a list ID if successful. The other commands are not valid Phantom API commands. phantom.add_list() is a Python function that can be used in custom code blocks to add data to an existing list. Reference, page 5.
質問 # 52
Which of the following describes the use of labels m Phantom?
- A. Labels determine the service level agreement (SLA) for a container.
- B. Labels control which apps are allowed to execute actions on the container.
- C. Labels determine which playbook(s) are executed when a container is created.
- D. Labels control the default seventy, ownership, and sensitivity for the container.
正解：C
解説：
Explanation
The correct answer is D because labels determine which playbook(s) are executed when a container is created.
Labels are tags that can be applied to containers to categorize them and trigger playbook automation. Labels can be added manually or automatically based on rules or ingestion settings. The answer A is incorrect because labels do not determine the service level agreement (SLA) for a container, which is a metric that measures the time taken to resolve a case. The answer B is incorrect because labels do not control the default severity, ownership, and sensitivity for the container, which are attributes that can be set independently of labels. The answer C is incorrect because labels do not control which apps are allowed to execute actions on the container, which are determined by the asset configuration and the playbook logic. Reference: Splunk SOAR User Guide, page 23.
質問 # 53
Which of the following will show all artifacts that have the term results in a filePath CEF value?
- A. .../result/artifact?_query_cef_filepath_icontains=''results
- B. .../result/artifacts/cef/filePath= '%results%''
- C. .../rest/artifact?_filter_cef_filePath_icontain=''results''
- D. ...rest/artifacts/filePath=''%results%''
正解：A
質問 # 54
Which app allows a user to send Splunk Enterprise Security notable events to Phantom?
- A. Splunk App for Phantom.
- B. Phantom App for Splunk.
- C. Splunk App for Phantom Reporting.
- D. Any of the integrated Splunk/Phantom Apps
正解：D
質問 # 55
......
Splunk SPLK-2003試験は、60の複数選択の質問で構成されており、90分以内に完了する必要があります。候補者は、Splunk Phantom認定管理者認定を取得するには、70％以上の合格スコアを達成する必要があります。この試験では、ファントムアーキテクチャ、インストールと構成、ワークフロー管理、プレイブックの作成と構成、および他のセキュリティツールとの統合など、さまざまなトピックについて説明します。成功した候補者は、Splunk Phantomを使用してセキュリティオペレーションワークフローを自動化し、インシデント対応を合理化し、全体的なセキュリティ姿勢を改善する能力を実証することができます。 Splunk SPLK-2003認定は、セキュリティの専門家がSplunk Phantomのスキルと専門知識を検証し、セキュリティオートメーションとオーケストレーション分野でのキャリアを促進する優れた方法です。
学習材料は有効なSPLK-2003効率的問題集：https://jp.fast2test.com/SPLK-2003-premium-file.html