2024年最新のHPE6-A72問題集にはAruba Certified Switching Associate (ACSA) V1認証済み試験問題と解答
実際に出ると確認されたHPE6-A72試験問題集と解答でHPE6-A72無料更新
質問 # 15
What are the commands to disable SSH and HTTPS services from the default VRF?
- A. Core-1(config)# no ssh server vrf default
Core-1(config)# no https-server vrf default - B. Core-1(config)# no ssh server enable
Core-1(config)# no https-server enable - C. Core-1(config)# no ssh server
Core-1(config)# no https-server - D. Core-1# no ssh server vrf default
Core-1# no https-server vrf default
正解：A
質問 # 16
Refer to the exhibit.
What command will display the debug l2mac events?
- A. show debug all
- B. show debug terminal
- C. show module L2MAC
- D. show debug buffer module L2MAC
正解：D
質問 # 17
Refer to the exhibit.
What is the correct binary conversion of the last two hexadecimal characters of the physical address?
- A. 1000 1101 1110 1101
- B. 1110 1101
- C. 1101 1000
- D. 1001 1111 0101 0011
正解：B
質問 # 18
Which two statements are true regarding Checkpoints on Aruba switches? (Choose two.)
- A. Rolling back to a prior checkpoint triggers a reboot of the switch.
- B. Checkpoints are available on AOS 5400R switches, as well as on all AOS-CX switches.
- C. System-generated checkpoints are created after a configuration change and 5 minutes of inactivity.
- D. A checkpoint is a snapshot of the running-configuration and relevant metadata at the time the checkpoint was created.
- E. Stacking switches using VSF or VSX will disable the Checkpoint feature.
正解：B、D
質問 # 19
Match each network protocol to the correct server listening port. Not all answers will be used.
正解：
解説：
Explanation:
Diagram Description automatically generated
質問 # 20
Match the terms to the correct layer of the OSI model.
正解：
解説：
質問 # 21
Refer to the exhibit.
What command will display the debug l2mac events?
- A. show debug all
- B. show debug terminal
- C. show module L2MAC
- D. show debug buffer module L2MAC
正解：D
質問 # 22
Which two types of routes can be found in the IP routing table of an Aruba AOS-CX switch? (Choose two.)
- A. Local
- B. RIPng
- C. EIGRP
- D. ISIS
- E. BGP
正解：A、E
質問 # 23
Which switches support Aruba Virtual Switching Extension (VSX)? (Choose two.)
- A. Aruba 2930F
- B. Aruba 8400
- C. Aruba 6405
- D. Aruba 8350
- E. Aruba 5406R
正解：B、C
質問 # 24
Core# configure terminal
Core(config)# vrf Green
Core(config-vrf)# exit
Core(config)#
Core(config)# interface vlan 50
Core(config-if-vlan)# ?
Given the configuration on the CORE switch shown above, what command would follow to assign the switched virtual interface (SVI) vlan 50 to the VRF created?
- A. Core(config-if-vlan)# ip vrf forwarding Green
- B. Core(config-if-vlan)# ip vpn-instance Green
- C. Core(config-if-vlan)# vrf attach Green
- D. Core(config-if-vlan)# routing-context Green vrf
正解：C
質問 # 25
What connectivity commands are available on AOS-CX switches? (Choose two.)
- A. ping
- B. pathping
- C. traceroute
- D. netstatus
- E. tracert
正解：A、C
質問 # 26
Refer to the exhibit.
You are in the process of configuring VSF between Access-1 and Access-2. Access-1 has been configured as the VSF Master. What is a valid configuration for Access-2 to join the VSF stack?
- A. Access-2# configure
Access-2(config)# vsf member 1
Access-2(config)# vsf renumber-to 2
Access-2(vsf-member-1)# link 2 2/1/28
Access-2(vsf-member-1)# exit
This will save the VSF configuration and reboot the switch.
Do you want to continue (y/n)? y - B. Access-2# configure
Access-2(config)# vsf member 2
Access-2(vsf-member-1)# link 1 1/1/28
Access-2(vsf-member-1)# exit
This will save the VSF configuration and reboot the switch.
Do you want to continue (y/n)? y - C. Access-2# configure
Access-2(config)# vsf member 1
Access-2(vsf-member-1)# link 1 1/1/28
Access-2(vsf-member-1)# exit
Access-2(config)# vsf renumber-to 2
This will save the VSF configuration and reboot the switch.
Do you want to continue (y/n)? y - D. Access-2# configure
Access-2(config># vsf member 2
Access-2(vsf-member-1)# link 2 1/1/28
Access-2(vsf-member-1)# exit
This will save the VSF configuration and reboot the switch.
Do you want to continue (y/n)? y
正解：B
質問 # 27
Which command can be used to find the serial number of an Aruba OS-CX switch?
- A. The command version
- B. The command show running-configuration
- C. The command show system
- D. The command inventory
正解：C
質問 # 28
Refer to the exhibit.
The Aruba 8400 in the exhibit is member 2 of a VSX stack.
Which command will enter the interface sub configuration mode for the port, indicated by the orange square?
- A. 8400(config)# interface 1/7/16
- B. 8400(config)# interface 2/3/17
- C. 8400(config)# interface 2/4/15
- D. 8400(config)# interface 1/4/15
正解：C
質問 # 29
Refer to the exhibit.
The above command was applied to an Aruba AOS-CX 6300M 24-port switch with 4-port SFP56 uplinks. All ports are set as access switchports.
Which ports carry VLAN 1 traffic?
- A. 1/1/1-1/1/24
- B. 1/1/8-1/1/10, 1/1/5-1/1/28
- C. 1/1/8, 1/1/10, 1/1/5-1/1/24
- D. 1/1/1-1/1/28
正解：B
質問 # 30
What command will save your configuration on an Aruba AOS-CX switch so that your changes automatically load on next reboot?
- A. copy startup-config running-config
- B. copy running-config initial-checkpoint
- C. copy running-config default
- D. copy running-config checkpoint startup-config
正解：D
質問 # 31
What is the login and password combination is used when first configuring an Aruba OS-CX switch from factory defaults?
- A. Loginadminand password forgetme!
- B. Login admin and password password.
- C. Loginadminand password admin.
- D. Loginadminand password field empty.
正解：D
質問 # 32
The section in blue can be ignored.
SW1(config)# interface 1/1/1-1/1/2
SW1(config-if-<1/1/1-1/1/2)# vlan access 2
SW1(config-if-<1/1/1-1/1/2)# exit
SW1(config)# interface 1/1/11-1/1/17
SW1(config-if-<1/1/11-1/1/17)# vlan access 17
SW1(config-if-<1/1/11-1/1/17)# exit
After completing the above commands, what is the expected output of show vlan with no other vlan commanded having been added?
- A. Option C
- B. Option D
- C. Option B
- D. Option A
正解：B
質問 # 33
Refer to the exhibit.
All switches are running Aruba OS-CX. While working in the terminal of Access-2, you are unable to reach Server-1 using SSH.
What is the correct command to ping Server-1 from Access-2 to test reachability?
- A. Access-2# ping 172.16.1.97 vrf mgmt
- B. Access-2# ping 172.16.1.97 vrf default
- C. Access-2# ping6 172.16.1.97 vrf mgmt.
- D. Access-2# ping 172.16.1.97
正解：A
質問 # 34
Refer to the exhibit.
What change on Core-1 will result in a successful ping to 10.1.1.254 from the management interface?
- A. Use the command ping 10.1.1.254 vrf mgmt
- B. The destination 10.1.1.254 requires configuring a static route
- C. Change the Core-1 management address to 10.1.1.1/25 first
- D. Use the command ping 10.1.1.254/24
正解：A
質問 # 35
Which command can be used to find the serial number of an Aruba OS-CX switch?
- A. The command version
- B. The command show running-configuration
- C. The command show system
- D. The command inventory
正解：C
解説：
Explanation/Reference:
質問 # 36
What are the benefits of a 3-Tier design over a 2-Tier? (Choose two.)
- A. Gaining the flexibility to connect the Data-Center to any Access layer switch.
- B. Offloading processing from the Core without routing at the Access layer.
- C. Can use lower speed links between Core to Aggregation and Aggregation to Access given the use of an Aggregation layer.
- D. Lowering the cost of a deployment due to needing less switches overall.
- E. Better scalability in a campus with a large number of buildings.
正解：B、E
質問 # 37
......
HP HPE6-A72試験は、60問の多肢選択問題から構成され、90分の試験時間があります。合格するには、少なくとも70%のスコアが必要です。試験は、英語、日本語、スペイン語など、複数の言語で利用可能です。候補者は、世界のいかなるPearson VUEテストセンターでも受験することができます。
HP HPE6-A72認定試験では、ネットワークスイッチング、VLAN、VLAN間ルーティング、ネットワークセキュリティの分野で候補者のスキルと知識のテストに焦点を当てています。この試験は60の複数選択の質問で構成されており、90分の時間制限があります。候補者は、試験に合格し、認定を受け取るために少なくとも70％を獲得する必要があります。
Aruba Certified Switching Associate（ACSA）試験としても知られるHP HPE6-A72試験は、最新のネットワークスイッチの構成と管理に必要なスキルと知識に焦点を当てた認定試験です。この試験は、アルバ製品を扱い、切り替えとネットワーク管理のスキルを検証したいIT専門家向けに設計されています。 ACSA認定は、アルバ製品と協力し、キャリアの見通しを強化したい専門家にとって貴重な資格です。
実際問題を使ってHPE6-A72問題集で100%無料HPE6-A72試験問題集：https://jp.fast2test.com/HPE6-A72-premium-file.html
HPE6-A72試験問題集、テストエンジン練習テスト問題：https://drive.google.com/open?id=1pX0cZ2yK6QlY2COhpCDlyidFnrYtc0rt