[2023年12月] 更新されたのはHP HPE6-A72問題集PDFオンラインエンジン
HPE6-A72.PDFで問題解答PDFサンプル問題は信頼され続ける
HPE6-A72認定試験は、90分以内に完了する必要がある60の複数選択質問で構成されています。この試験はピアソンヴェーによって管理されており、世界中のテストセンターで撮影できます。候補者は、認定を獲得するには、70％以上の合格スコアを達成する必要があります。成功した候補者は、アルバスイッチングテクノロジーの専門知識を実証し、潜在的な雇用主にスキルと知識を検証する証明書を受け取ります。
HPE6-A72の認定試験は、ArubaOS-Switchの設定および管理に関するネットワーク専門家の知識と技術を検証するための優れた方法です。この認定を取得することで、候補者はArubaの有線および無線ネットワークに取り組む専門知識を証明でき、キャリアアップや収入向上に役立つことができます。
質問 # 32
You need to remote into an AOS-CX switch using SSH in order to update the management IP address for future connections. Unfortunately, you mis-configured the IP address and are now locked out of the switch.
What command could you have issued before making changes that would have recovered the original switch configuration after ten minutes?
- A. boot system secondary 10
- B. checkpoint rollback 10
- C. checkpoint auto confirm 10
- D. checkpoint auto 10
正解：D
質問 # 33
Which command can be used to find the serial number of an Aruba OS-CX switch?
- A. The command show running-configuration
- B. The command show system
- C. The command version
- D. The command inventory
正解：B
質問 # 34
Refer to the exhibit.
The command show LLDP neighbor-info gets typed into Access-1. All switches are Aruba OS-CX switches. What is the output of this command?
- A. Option B
- B. Option C
- C. Option D
- D. Option A
正解：C
質問 # 35
Core# configure terminal
Core(config)# vrf Green
Core(config-vrf)# exit
Core(config)#
Core(config)# interface vlan 50
Core(config-if-vlan)# ?
Given the configuration on the CORE switch shown above, what command would follow to assign the switched virtual interface (SVI) vlan 50 to the VRF created?
- A. Core(config-if-vlan)# vrf attach Green
- B. Core(config-if-vlan)# ip vrf forwarding Green
- C. Core(config-if-vlan)# routing-context Green vrf
- D. Core(config-if-vlan)# ip vpn-instance Green
正解：A
質問 # 36
Which statement is correct regarding powering an Aruba Access Point?
- A. Using switchports for this reason is unnecessary, because Aruba Access Points typically use an AC to DC power adapter to draw power.
- B. PoE or PoE+ enabled switchports are rarely used given concerns about causing electrical interference, with the data also carried over Ethernet cabling.
- C. Most administrators use PoE or PoE+ enabled switchports to provide both Ethernet connectivity and power to the AP.
- D. PoE or PoE+ is only used with Ethernet that is carried over multi-mode fiber cabling.
正解：C
質問 # 37
What is an available command on an Aruba AOS-CX switch that would back up the secondary image to a secure remote repository?
- A. copy sftp://[email protected]/GL.10.04.0003.swi secondary
- B. backup secondary sftp://[email protected]/GL.10.04.0003.swi
- C. copy secondary tftp://[email protected]/GL.10.04.0003.swi
- D. copy secondary sftp://[email protected]/GL.10.04.0003.swi
正解：D
質問 # 38
Match each description to the correct management tool for Aruba AOS-CX.
正解：
解説：
質問 # 39
Refer to the exhibit.
You are in the process of configuring VSF between Access-1 and Access-2. Access-1 has been configured as the VSF Master.
What is a valid configuration for Access-2 to join the VSF stack?
- A. Access-2# configure
Access-2(config)# vsf member 1 Access-2(config)# vsf renumber-to 2 Access-2(vsf-member-1)# link 2 2/1/28 Access-2(vsf-member-1)# exit This will save the VSF configuration and reboot the switch. Do you want to continue (y/n)? y - B. Access-2# configure
Access-2(config)# vsf member 2 Access-2(vsf-member-1)# link 1 1/1/28 Access-2(vsf-member-1)# exit This will save the VSF configuration and reboot the switch. Do you want to continue (y/n)? y - C. Access-2# configure
Access-2(config)# vsf member 1 Access-2(vsf-member-1)# link 1 1/1/28 Access-2(vsf-member-1)# exit Access-2(config)# vsf renumber-to 2 This will save the VSF configuration and reboot the switch. Do you want to continue (y/n)? y - D. Access-2# configure
Access-2(config)# vsf member 2 Access-2(vsf-member-1)# link 2 1/1/28 Access-2(vsf-member-1)# exit This will save the VSF configuration and reboot the switch. Do you want to continue (y/n)? y
正解：B
質問 # 40
The following command is issued:
Switch# checkpoint rollback start
What is the result?
- A. The switch will use the checkpoint 'rollback1 as the starting configuration on next reboot.
- B. The command will fail because it is incomplete.
- C. The switch will revert the running-configuration to the checkpoint called 'start1 without a reboot.
- D. The command will fail because rollback commands must be issued from global-config mode.
正解：C
質問 # 41
What is true about VSX? (Choose two.)
- A. VSX run separate control planes to reduce latency and improve performance.
- B. VSX allows upgrading members with near zero downtime or loss of packets.
- C. VSX is available on all Aruba OS-CX switches except the 6300F model.
- D. VSX is ideal for Campus access layer deployments where ease of deployment is needed.
- E. VSX is implemented on static port switches. VSX-plus needed to stack chassis together.
正解：A、B
質問 # 42
Which two statements accurately describe stacking with Aruba switches? (Choose two.)
- A. VSF and VSX are stacking option with the AOS-CX 8320. 8325. 8400. and 6400 models.
- B. A VSF stack is allowed between an AOS-CX 6300M and 6300F switches.
- C. A VSF stack is allowed between an AOS 5400R and an AOS-CX 6400.
- D. The VSF feature is not compatible between AOS-CX and AOS platforms.
- E. VSF is a core or aggregation layer stacking technology due to the high resiliency of sharing a single control plane.
正解：A、E
質問 # 43
Refer to the exhibit.
All switches are running Aruba OS-CX. While working in the terminal of Access-2, you are unable to reach Server-1 using SSH.
What is the correct command to ping Server-1 from Access-2 to test reachability?
- A. Access-2# ping 172.16.1.97 vrf default
- B. Access-2# ping 172.16.1.97 vrf mgmt
- C. Access-2# ping 172.16.1.97
- D. Access-2# ping6 172.16.1.97 vrf mgmt.
正解：B
質問 # 44
Click on the colored box that corresponds with the line that best represents Multicast traffic flow.
正解：
解説：
Explanation:
Blue Box
質問 # 45
What are two OSPF attributes within the hello messages that must match to successfully establish neighbor relationships? (Choose two.)
- A. Hello and Dead intervals
- B. Router ID
- C. Process ID
- D. Priority
- E. Area ID
正解：A、E
質問 # 46
Which field in the IPv4 header indicates whether the IP packet carries TCP or UDP traffic?
- A. IHL
- B. Protocol
- C. TTL
- D. Identification
正解：B
質問 # 47
......
HP HPE6-A72問題集PDFのベストを目指すなら問題集を使おう 目指そう高得点：https://jp.fast2test.com/HPE6-A72-premium-file.html
Aruba Certified Switching Associate (ACSA) V1 HPE6-A72試験と認定テストエンジン：https://drive.google.com/open?id=1pX0cZ2yK6QlY2COhpCDlyidFnrYtc0rt