最近更新の2024年12月テストエンジンとPDF HP HPE6-A72テストあなたの最速HP合格準備を保証させる！
完全版HPE6-A72練習テスト107別格な問題と解釈が待ってます。今すぐゲット！
質問 # 50
Which two types of routes can be found in the IP routing table of an Aruba AOS-CX switch? (Choose two.)
- A. BGP
- B. RIPng
- C. EIGRP
- D. ISIS
- E. Local
正解：A、E
質問 # 51
ServiceOS login: admin
SVOS> password
Enter password: ********
Confirm password: ********
The login password to access an Aruba AOS-CX was lost. After connecting to the switch console port, a reboot is performed and the Service OS console is accessed as shown above.
What is the default password that is required for the admin account while under the Service OS console?
- A. The same login password that has lost originally.
- B. "forgetme!"
- C. No password is set for this account.
- D. "password"
正解：B
質問 # 52
Which two options are correct regarding the IEEE 802.11ax standard? (Choose two.)
- A. is the first WLAN standard to no longer use electromagnetic signals to transmit data
- B. operates only in the 5GHz similar to 802.11ac
- C. allows transmissions of up to 4.8Gbps
- D. is an emerging satellite connection standard to allow wireless access anywhere in the world
- E. operates in both the 2.4GHz and 5GHz radios bands
正解：C、E
解説：
Explanation/Reference:
質問 # 53
You need to remote into an AOS-CX switch using SSH in order to update the management IP address for future connections. Unfortunately, you mis-configured the IP address and are now locked out of the switch.
What command could you have issued before making changes that would have recovered the original switch configuration after ten minutes?
- A. boot system secondary 10
- B. checkpoint auto confirm 10
- C. checkpoint auto 10
- D. checkpoint rollback 10
正解：C
質問 # 54
Refer to the exhibit.
Traffic is failing between Core-1 and Host-B. IP addressing has correctly been applied, and all interfaces are attached to the vrf GREEN.
Which configuration will correct the issue?
- A. Core-1(config)# ip route 10.1.20.0/24 10.1.1.2 vrf GREEN Host-B: assign the default-gateway address
10.1.20.181 - B. Core-1(config)# ip route 10.1.20.0/24 10.1.1.2 vrf GREEN Host-B: assign the default-gateway address
10.1.20.1 - C. Host-B: assign the default-gateway address 10.1.20.181
- D. Core-2(config)# ip route 0.0.0.0/0 10.1.1.1 vrf GREEN Host-B: assign the default-gateway address
10.1.20.181
正解：A
質問 # 55
Which two commands will save the running-config so that changes will be loaded automatically on the next reboot? (Choose two.)
- A. save
- B. write memory
- C. copy config config1 config startup-config
- D. copy running-config checkpoint boot-config
- E. copy running-config startup-config
正解：B、E
質問 # 56
Match the term to the correct description.
正解：
解説：
質問 # 57
What are two features of the three-tier designs? (Choose two.)
- A. uses only Layer 2 access on the Access and the Core with Layer 3 routing and access control provided at the distribution layer
- B. adds a distribution layer to free up resources from the Core for improved performance and routing throughput
- C. a more scalable design over by leveraging a distribution layer to handle Layer 3 routing and access control in large deployments
- D. removes the distribution layer in favor of a spine-leaf design used in modern data center deployments
- E. is considered legacy by requiring a large flat layer-two broadcast domain from Core to Access and should be avoided
正解：B、C
質問 # 58
What is true about VSX? (Choose two.)
- A. VSX is implemented on static port switches. VSX-plus needed to stack chassis together.
- B. VSX is ideal for Campus access layer deployments where ease of deployment is needed.
- C. VSX run separate control planes to reduce latency and improve performance.
- D. VSX allows upgrading members with near zero downtime or loss of packets.
- E. VSX is available on all Aruba OS-CX switches except the 6300F model.
正解：C、D
質問 # 59
What are two OSPF attributes within the hello messages that must match to successfully establish neighbor relationships? (Choose two.)
- A. Hello and Dead intervals
- B. Process ID
- C. Priority
- D. Area ID
- E. Router ID
正解：A、D
質問 # 60
Refer to the exhibit.
You are in the process of configuring VSF between Access-1 and Access-2. Access-1 has been configured as the VSF Master.
What is a valid configuration for Access-2 to join the VSF stack?
- A. Access-2# configure
Access-2(config)# vsf member 2 Access-2(vsf-member-1)# link 2 1/1/28 Access-2(vsf-member-1)# exit This will save the VSF configuration and reboot the switch. Do you want to continue (y/n)? y - B. Access-2# configure
Access-2(config)# vsf member 2 Access-2(vsf-member-1)# link 1 1/1/28 Access-2(vsf-member-1)# exit This will save the VSF configuration and reboot the switch. Do you want to continue (y/n)? y - C. Access-2# configure
Access-2(config)# vsf member 1 Access-2(vsf-member-1)# link 1 1/1/28 Access-2(vsf-member-1)# exit Access-2(config)# vsf renumber-to 2 This will save the VSF configuration and reboot the switch. Do you want to continue (y/n)? y - D. Access-2# configure
Access-2(config)# vsf member 1 Access-2(config)# vsf renumber-to 2 Access-2(vsf-member-1)# link 2 2/1/28 Access-2(vsf-member-1)# exit This will save the VSF configuration and reboot the switch. Do you want to continue (y/n)? y
正解：B
質問 # 61
What is the Link Layer Discovery Protocol?
- A. an Aruba proprietary discovery protocol supported in all Aruba switches along with Cisco Discovery Protocol or CDP
- B. a discovery protocol used between Layer 3 devices to determine routes within a single autonomous system
- C. a standardized IPv6 neighbor discovery protocol used to replace the ARP and broadcast mechanism used in IPv4
- D. a standardized protocol for communicating directly-connected device information and capabilities.
正解：D
質問 # 62
With what other technology does Half Duplex communication closely match?
- A. point-to-point connections between two switches allowing concurrent transmit and receive
- B. a pair of fiber optic strands allowing transmit on one and receive on the other at the same time
- C. a mobile phone call
- D. CB radio using push-to-talk
正解：D
質問 # 63
Refer to the exhibit.
Refer to the diagram where all switches are CX 6300Ms. Which MSTP configuration should be applied to Core-2 in order for Core-2 to join the domain as the primary for Instance 2 and secondary for Instance 1?
- A. A black text on a white background Description automatically generated
- B. A black text on a white background Description automatically generated
- C. A close-up of words Description automatically generated
- D. A black text on a white background Description automatically generated
正解：D
質問 # 64
Refer to the exhibit.
The above scenario shows a packet from the Server destined for the Firewall. Switch-A and Switch-B are bundled as VSF stack. The LAG between the VSF stack and the firewall indicates a hash function to forward the packet on port 2/1/2.
Which statement is true regarding how Switch-A will forward the packet?
- A. Switch-A will forward the packet along the VSF link to Switch-B so that it will egress on port 2/1/2 per the hash function.
- B. Switch-A will forward the packet on port 1/1/2. VSF will override the typical LAG hash function used for the physical interface selection.
- C. Switch-A will encapsulate the packet using GRE to forward to Switch-B in order for the packet to egress on port 2/1/2 per the hash function.
- D. Switch-A will drop the packet. Multi-Chassis lag to multi-chassis lag is not a supported feature of VSF.
正解：A
質問 # 65
Which command can be used to find the serial number of an Aruba OS-CX switch?
- A. The command inventory
- B. The command version
- C. The command show running-configuration
- D. The command show system
正解：D
解説：
Explanation/Reference:
質問 # 66
Core(config)# user admin password
Core(config)# interface mgmt
Core(config-if-mgmt)# ip static 10.254.16.89/22
Core(config-if-mgmt)# default-gateway 10.254.19.129
Core(config)# ssh server vrf mgmt
Core(config)# https-server vrf mgmt
You are tasked with configuring the Core switch to be managed by NetEdit. Currently, the Core switch is at factory-default settings.
Which two steps are missing? (Choose two.)
- A. Core(config)# https-server rest access-mode read-only
- B. Core(config-if-mgmt)# no tftp-server
- C. Core(config-if-mgmt)# no shutdown
- D. Core(config)# https-server rest access-mode read-write
- E. Core(config-if-mgmt)# enable
正解：C、D
質問 # 67
Which two statements are true about the state of a new HPE Aruba Networking CX 6300 Series switch on factory defaults? (Select two.)
- A. For the CX 6300M switch, all up-link ports and switchports are configured as access mode.
- B. The CX 6300M up-link ports only support routed mode. All other ports only support access mode.
- C. LLDP is not enabled but is supported on all AOS-CX switches.
- D. The CX 6300M has support for IP addressing applied to switched virtual interfaces (SVIs) but not on routed ports.
- E. LLDP is enabled on up-link ports and switchports for the CX 6300M.
正解：A、E
質問 # 68
Which field in the IPv4 header indicates whether the IP packet carries TCP or UDP traffic?
- A. Identification
- B. Protocol
- C. IHL
- D. TTL
正解：B
質問 # 69
Review the exhibit.
Which ports should be configured as access ports? Click in the green box to make your selection. (Select two.)
正解：
解説：
Explanation:
A diagram of a computer network Description automatically generated
質問 # 70
Refer to the exhibit.
What does the command page result in?
- A. Results in a page break to disable the default continuous scrolling In the console.
- B. Shows a new terminal window opening to allow typing while debugging occurs.
- C. Enables a terminal notification when a new debug event occurs for L2MAC events.
- D. Starts an automatic page scrolling effect that pauses for a few seconds every 30 rows.
正解：C
質問 # 71
Which switch supports a maximum of 8 line-cards, 3 fabric modules, and 2 management cards?
- A. HPE Aruba Networking CX 6410
- B. HPE Aruba Networking CX 8408
- C. HPE Aruba Networking CX 8400
- D. HPE Aruba Networking CX 5412r
正解：C
質問 # 72
Refer to the exhibit.
What change on Core-1 will result in a successful ping to 10.1.1.254 from the management interface?
- A. The destination 10.1.1.254 requires configuring a static route
- B. Change the Core-1 management address to 10.1.1.1/25 first
- C. Use the command ping 10.1.1.254 vrf mgmt
- D. Use the command ping 10.1.1.254/24
正解：C
質問 # 73
Refer to the exhibit.
The above scenario shows a packet from the Server destined for the Firewall. Switch-A and Switch-B are bundled as VSF stack. The LAG between the VSF stack and the firewall indicates a hash function to forward the packet on port 2/1/2.
Which statement is true regarding how Switch-A will forward the packet?
- A. Switch-A will forward the packet along the VSF link to Switch-B so that it will egress on port 2/1/2 per the hash function.
- B. Switch-A will forward the packet on port 1/1/2. VSF will override the typical LAG hash function used for the physical interface selection.
- C. Switch-A will encapsulate the packet using GRE to forward to Switch-B in order for the packet to egress on port 2/1/2 per the hash function.
- D. Switch-A will drop the packet. Multi-Chassis lag to multi-chassis lag is not a supported feature of VSF.
正解：A
質問 # 74
......
最新のHPE6-A72問題集試験問題を取得：https://drive.google.com/open?id=1pX0cZ2yK6QlY2COhpCDlyidFnrYtc0rt
完全版HPE6-A72練習テスト107別格な問題と解釈が待ってます。：https://jp.fast2test.com/HPE6-A72-premium-file.html