[Q32-Q57] 合格させるC1000-132試験一発合格保証100%カバー率でリアル試験問題 [2023年04月]

合格させるC1000-132試験一発合格保証100%カバー率でリアル試験問題 [2023年04月]

有効なC1000-132テスト解答IBM C1000-132試験PDF問題を試そう

質問 # 32
On a Work Order with no GL Account specified, which GL Account will take precedence?

• A. Asset
• B. Job Plan
• C. Location
• D. Work Order Control Account

正解：D

質問 # 33
How is the Lock Out / Tag Outs application structured?

• A. Specify a Tag Out on the Location or Asset and define the Lock Out Operations.
• B. Define the isolation procedures on a set of related assets and specify a sequence.
• C. Specify a Lock Out on an Asset with a Locking Device and define the Tag Out Operations.
• D. Specify a Lock Out on the Location or Asset and define the Tag Out Operations.

正解：D

解説：
In IBM Maximo Manage v8.0 implementation, the Lock Out / Tag Out application is structured such that you specify a Lock Out on the Location or Asset and define the Tag Out operations. This application is used to manage the procedures and controls put in place to protect personnel from injury due to unintended or inadvertent equipment or system operation.

質問 # 34
In which status can a Job Plan be modified to add a new task?

• A. PNDREV
• B. INACTIVE
• C. NEW
• D. REVISED

正解：D

質問 # 35
A user wishes to perform the same work tasks on several assets simultaneously. How can this be configured?

• A. The Assets should be specified on the Multiple Assets, Locations and CIs table on the Work Order.
• B. A Master Job Plan should be created with Tasks for each Asset.
• C. A Route should be created with each stop being one Asset and the Job Plan associated with the Route record.
• D. A Work Order Hierarchy should be created against the same Job Plan used for all stops.

正解：C

解説：
To perform the same work tasks on several assets simultaneously, a route can be created in the Routes application. A route is a series of work orders that are generated in a specific sequence to maintain a group of assets. Each stop in the route can be associated with a specific asset, and the job plan can be assigned to the route record, which means the same job plan tasks can be performed on each asset.

質問 # 36
When users are added to multiple security groups, the authorization privileges of the security groups combine, with the exception of security groups with which setting?

• A. Discreet
• B. Separate
• C. Independent
• D. Autonomous

正解：C

解説：
When users are added to multiple security groups, the authorization privileges of the security groups combine, with the exception of security groups with the "Independent" setting. When a security group has the "Independent" setting, its authorization privileges are applied separately from any other security group that the user belongs to.

質問 # 37
Which Maximo application can be used to generate replacement plans for assets?

• A. Maximo Health, Safety and Environmental (HSE)
• B. Maximo Predict
• C. Maximo Health
• D. Maximo Manage

正解：C

解説：
The Maximo Health application can be used to generate replacement plans for assets.

質問 # 38
In the Inventory Usage application when the type is TRANSFER, if a user changes the status to COMPLETE what type of transaction record is created?

• A. Transaction Type TRANSFER in MATRECTRANS table
• B. Transaction Type ISSUE in MATUSETRANS table
• C. Transaction Type SHIPTRANSFER in MATRECTRANS table
• D. Transaction Type RETURN in MATUSETRANS table

正解：C

解説：
In the Inventory Usage application when the type is TRANSFER, if a user changes the status to COMPLETE a transaction record of type SHIPTRANSFER is created in the MATRECTRANS table.

質問 # 39
To what type of objects can a Service Level Agreement be applied?

• A. only the objects based on the Work Order or Ticket Classes, and Assets, Locations and Configuration Items
• B. any Main Object
• C. only the Main Object that are Internal
• D. only the objects based on the Work Order or Ticket Classes

正解：A

解説：
A Service Level Agreement can be applied only to objects based on the Work Order or Ticket Classes, and Assets, Locations and Configuration Items.

質問 # 40
What is the result of selecting the Validate GL Component Combinations in the Chart of Accounts application on financial transactions?

• A. Any valid GL component can be used.
• B. Only valid GL accounts can be used.
• C. Validates transactions occurred during an active financial period.
• D. Any GL component can be used.

正解：B

解説：
When selecting the Validate GL Component Combinations in the Chart of Accounts application on financial transactions in IBM Maximo Manage, only valid GL accounts can be used.

質問 # 41
Which statement is true regarding Work Assets in the Safety Plans application?

• A. A Work Asset is either an Asset, Asset Type, or a Location. A user does not need to specify Work Assets, as a Safety Plan can be applied without it.
• B. A Work Asset is either a Location or an Asset. A user does not need to specify Work Assets, as a Safety Plan can be applied without it.
• C. A Work Asset is either a Rotating Item, a Location, or an Asset. A user needs to specify at least one of these for each record.
• D. A Work Asset is either a Location or an Asset. A user needs to specify at least one of these for each record.

正解：D

解説：
In the Safety Plans application, a Work Asset is either a location or an asset that requires the safety plan. Each safety plan record must have at least one work asset specified, and the work asset can be a location or an asset.

質問 # 42
In which application can a Contract property default be set for a specific contract type, for example Is early termination allowed by the Customer?

• A. Database Configuration
• B. Organizations
• C. System Properties
• D. Contract Administration

正解：D

解説：
The Contract Administration application is used to set contract property defaults for specific contract types. For example, you can set whether early termination is allowed by the customer for a specific contract type.

質問 # 43
How can a Master Preventive Maintenance record be associated with multiple non-rotating assets?

• A. Add the Assets to the Multiple Assets table on the Master Preventive Maintenance record.
• B. Use the Move/Modify Assets action.
• C. Use the Apply Down Hierarchy action on the Master Preventive Maintenance record.
• D. Use an Asset Template.

正解：A

解説：
To associate a Master Preventive Maintenance record with multiple non-rotating assets, we can add the assets to the Multiple Assets table on the Master Preventive Maintenance record. This allows us to associate the preventive maintenance schedule with multiple assets, ensuring that the maintenance activities are performed on each of the associated assets as scheduled.

質問 # 44
Which application in the IBM Maximo Application Suite can be used to perform criticality scoring?

• A. Maximo Supervision
• B. Maximo Prevent
• C. Maximo Health
• D. Maximo Manage

正解：C

解説：
The Maximo Health application in the IBM Maximo Application Suite can be used to perform criticality scoring.

質問 # 45
What are two of the filters in the Select Value of a Location or Asset in the Service Requests application?

• A. Service Address
• B. User/Custodians
• C. Work Zones
• D. Public
• E. Service Group/Services

正解：A、E

解説：
Two of the filters in the Select Value of a Location or Asset in the Service Requests application in IBM Maximo Manage are Service Address and Service Group/Services.

質問 # 46
In the Assets application a used engine needs to be replaced with a rebuilt engine, how might the rebuilt engine inherit the depreciation schedule from the used engine?

• A. Use the action Swap Depreciation Schedules.
• B. Use the action Split Depreciation Schedules.
• C. Use the action Exchange Depreciation Schedules.
• D. Use the action Copy Depreciation Schedules.

正解：D

解説：
To replace a used engine with a rebuilt engine in the Assets application in IBM Maximo Manage v8.0 implementation and inherit the depreciation schedule from the used engine, you can use the "Copy Depreciation Schedules" action. This action allows you to copy the depreciation schedules from the old asset to the new asset, including the depreciation terms and any calculation information.

質問 # 47
If additional attributes are added to the Work View, how can they be automatically updated from changes made to a corresponding Ticket and Work Order fields?

• A. by modifying the existing Object Launch Point automation script UpdateWV
• B. by modifying the existing Crossover Domains TKT2WV or W02WV
• C. by adding a Crossover Domain to TICKETID or WONUM
• D. by updating the existing Cron Task UpdateWorkView that has two instances TKT2WV and W02WV that use the Crossover Domains of the same name

正解：B

解説：
In IBM Maximo Manage v8.0 implementation, if you add additional attributes to the Work View and want them to be automatically updated from changes made to corresponding Ticket and Work Order fields, you can modify the existing Crossover Domains TKT2WV or W02WV. Crossover Domains define a mapping between fields on two different objects, allowing data to be synchronized between them.

質問 # 48
At which data storage level are locations, assets and storerooms defined?

• A. Set
• B. Site
• C. System
• D. Organization

正解：B

解説：
Locations, assets and storerooms are defined at the Site level in IBM Maximo Manage.

質問 # 49
In which two places can Service Request Categories be created for use in the Service Request Work Center?

• A. Business Analysis Work Cen
• B. Classifications Application
• C. Administration Work Center
• D. Service Desk Application
• E. Service Catalog Application

正解：C、E

解説：
In IBM Maximo Manage, Service Request Categories can be created for use in the Service Request Work Center in two places - the Administration Work Center and the Service Catalog Application.

質問 # 50
When a Service Level Agreement is applied to a WORKORDER object, what Commitment Type will be missing from the lookup?

• A. DOWNTIME
• B. CONTACT
• C. AVAILABILITY
• D. DELIVERY

正解：D

解説：
When a Service Level Agreement (SLA) is applied to a WORKORDER object in IBM Maximo Manage v8.0 implementation, the Commitment Type that will be missing from the lookup is DELIVERY. The other possible Commitment Types in Maximo Manage are DOWNTIME, AVAILABILITY, and CONTACT.

質問 # 51
When users are added to multiple security groups, the authorization privileges of the security groups combine, with the exception of security groups with which setting?

• A. Discreet
• B. Separate
• C. Independent
• D. Autonomous

正解：C

解説：
When users are added to multiple security groups, the authorization privileges of the security groups combine, with the exception of security groups with the "Independent" setting. When a security group has the "Independent" setting, its authorization privileges are applied separately from any other security group that the user belongs to.

質問 # 52
In what Maximo Manage application are the specifications of an asset for calibration entered?

• A. Asset
• B. Classifications
• C. Data Sheet Template
• D. Improvements

正解：C

解説：
In IBM Maximo Manage, the specifications of an asset for calibration are entered in the Data Sheet Template application.

質問 # 53
What is the purpose of the Admin mode?

• A. perform Database Configuration without needing to shut down the Maximo server
• B. change System Properties without needing to shut down the Maximo server
• C. perform administrative functions
• D. apply changes in Application Designer

正解：A

解説：
The purpose of Admin mode in IBM Maximo Manage is to allow users to perform Database Configuration without needing to shut down the Maximo server.

質問 # 54
How many failure reports can be created for the same Work Order?

• A. just one failure report
• B. unlimited failure reports for each work order, but none for a task
• C. unlimited failure reports for either a work order or any of its tasks
• D. one failure report for the work order and only one for each task of the work order

正解：D

解説：
In IBM Maximo Manage, you can create one failure report for a Work Order and only one for each task of the Work Order.

質問 # 55
When working with Purchase Requests, which statement is correct?

• A. All Purchase Requests must be approved by an authorized person.
• B. Purchase Request Description is mandatory in the header section.
• C. Purchase Request must have a vendor specified.
• D. One Purchase Request can contain both Item and Material type lines

正解：D

解説：
When working with Purchase Requests in IBM Maximo Manage, one Purchase Request can contain both Item and Material type lines.

質問 # 56
When creating a new Inspection form, a client requires a Work Order to be created if certain responses are recorded. Which two actions are required for this to be achieved?

• A. In the Question Options, set the Require action flag.
• B. Choose Work Order on question action.
• C. Make the question response interactive.
• D. In Form Settings add an Action Script.
• E. Create an escalation on the QRESPONSE Object.

正解：A、B

解説：
According to the IBM documentation, you can create inspection forms that detail the questions and types of responses that you want to collect. The inspection forms that you create are then available to inspectors in the Conduct an Inspection tool. You can also add conditions to the response fields of existing questions on inspection forms to gather more information. You can determine which additional response fields appear to inspectors, depending on the answers they gave to inspection form questions.
To create a work order based on certain responses, you need to do two things:
Choose Work Order on question action: This option allows you to specify an action that is triggered when a certain response is selected by the inspector. For example, if a question asks "Is there any damage?", and the inspector selects "Yes", you can choose Work Order as the action that is triggered by this response. This will create a work order for repairing the damage.
In the Question Options, set the Require action flag: This option allows you to indicate that an action is required for a question. For example, if a question asks "Is there any damage?", and you set the Require action flag to Yes, then the inspector must select a response that triggers an action, such as Work Order or Notification. If they select a response that does not trigger an action, such as "No" or "N/A", they will see an error message and will not be able to submit the inspection form.

質問 # 57
......

C1000-132試験問題にて有効なC1000-132問題集PDF：https://jp.fast2test.com/C1000-132-premium-file.html