準備できるC1000-132問題解答は無料更新されて100%試験合格保証 [2024]
問題集リアルなIBM C1000-132試験問題 [更新されたのは2024年]
IBM C1000-132認定試験は、ITのバックグラウンドとエンタープライズソリューションの実装と構成の経験を持つ専門家を対象としています。候補者は、IBM Maximo Asset Management SolutionとMaximo Application Suite、Maximo Integration Framework、Maximo Automation Scriptingなどのコンポーネントを確実に理解する必要があります。この試験は、複数選択の質問で構成されており、60％の合格スコアが必要です。成功した候補者は、IBM Maximo Asset Management v8.0実装の習熟度を示すIBMから証明書を受け取ります。
質問 # 12
How many failure reports can be created for the same Work Order?
- A. unlimited failure reports for either a work order or any of its tasks
- B. unlimited failure reports for each work order, but none for a task
- C. just one failure report
- D. one failure report for the work order and only one for each task of the work order
正解：D
解説：
In IBM Maximo Manage, you can create one failure report for a Work Order and only one for each task of the Work Order.
質問 # 13
What can be done when decommissioning a location that cannot be done when decommissioning an asset?
- A. Remove All Reference to This Location from All Contracts?
- B. Delete Associated Service Addresses That will be made Redundant?
- C. Roll New Status down to All Assets in All Changed Locations?
- D. Remove All References to This Location from All Job Plans?
正解：C
解説：
When decommissioning a location in IBM Maximo Manage, you can roll the new status down to all assets in all changed locations. This cannot be done when decommissioning an asset.
質問 # 14
Which two domain types can have a specified error message?
- A. ALN
- B. CROSSOVER
- C. TABLE
- D. SYNONYM
- E. NUMERIC
正解：A、C
解説：
In IBM Maximo Manage, the two domain types that can have a specified error message are TABLE and ALN.
質問 # 15
Select all that apply
What is the appropriate order of phases in order to create a workflow process?
正解：
解説：
1 - Create the process
2 - Validate the process
3 - Enable the process
質問 # 16
Which two statuses of a Purchase Order will allow a receipt of new items to be processed in the Receiving application if the Purchase Order is not being revised?
- A. INPRG
- B. REVISD
- C. HOLD
- D. PNDREV
- E. APPR
正解：A、E
解説：
In IBM Maximo Manage, if a Purchase Order is not being revised, two statuses that will allow a receipt of new items to be processed in the Receiving application are APPR and INPRG.
質問 # 17
What are the three usage types in the Inventory Usage application?
- A. TRANSFER
- B. RECEIV
- C. STAGED
- D. ISSUE
- E. MIXED
- F. MOVE
正解：A、C、D
解説：
In IBM Maximo Manage v8.0 implementation, the usage types in the Inventory Usage application are ISSUE, STAGED, and TRANSFER. ISSUE is used to relieve items from inventory for use in maintenance or other processes. STAGED is used to reserve items for future use. TRANSFER is used to move items from one inventory location to another, typically within the same organization.
質問 # 18
How can a Master Preventive Maintenance record be associated with multiple non-rotating assets?
- A. Add the Assets to the Multiple Assets table on the Master Preventive Maintenance record.
- B. Use the Apply Down Hierarchy action on the Master Preventive Maintenance record.
- C. Use the Move/Modify Assets action.
- D. Use an Asset Template.
正解：A
解説：
To associate a Master Preventive Maintenance record with multiple non-rotating assets, we can add the assets to the Multiple Assets table on the Master Preventive Maintenance record. This allows us to associate the preventive maintenance schedule with multiple assets, ensuring that the maintenance activities are performed on each of the associated assets as scheduled.
質問 # 19
In the Work Order Tracking application, a Work Order is generated from a Preventive Maintenance (PM) record. How is the target finish date calculated?
- A. the Work Order target start date + the Job Plan duration
- B. the PM target finish date
- C. the Job Plan start date + the Job Plan duration
- D. the Job Plan finish date
正解：A
解説：
In the Work Order Tracking application, when a Work Order is generated from a Preventive Maintenance (PM) record, the target finish date is calculated as the Work Order target start date + the Job Plan duration.
質問 # 20
In the Assets application a used engine needs to be replaced with a rebuilt engine, how might the rebuilt engine inherit the depreciation schedule from the used engine?
- A. Use the action Exchange Depreciation Schedules.
- B. Use the action Swap Depreciation Schedules.
- C. Use the action Copy Depreciation Schedules.
- D. Use the action Split Depreciation Schedules.
正解：C
解説：
To replace a used engine with a rebuilt engine in the Assets application in IBM Maximo Manage v8.0 implementation and inherit the depreciation schedule from the used engine, you can use the "Copy Depreciation Schedules" action. This action allows you to copy the depreciation schedules from the old asset to the new asset, including the depreciation terms and any calculation information.
質問 # 21
Calendars can be associated with which three record types?
- A. Contracts
- B. Job Plan
- C. Person
- D. Locations
- E. Items
- F. Assets
正解：C、D、F
質問 # 22
When using flow control on a Work Order, how ca from the Parent to Child Work Orders?
user ensure that Work Order status changes are inherited
- A. In the Organization application, check the Intarit Status Changes flag in Work Order Options -> Flow Control Options.
- B. Check the Roll Down Status Changes flag on the Parent and Child Work Order.
- C. Ensure the Asset or Location
on both the Parent and Child Work Order. - D. Check the Inherit Status Changes flag on the Work Order and ensure the mxe.app.wo.flowControlStatuslnheritance System Properties is set to 1.
正解：A
解説：
When using flow control on a Work Order in IBM Maximo Manage, to ensure that Work Order status changes are inherited from the Parent to Child Work Orders, you should go to the Organization application and check the Inherit Status Changes flag in Work Order Options -> Flow Control Options.
質問 # 23
When a Service Level Agreement is applied to a WORKORDER object, what Commitment Type will be missing from the lookup?
- A. CONTACT
- B. DOWNTIME
- C. DELIVERY
- D. AVAILABILITY
正解：C
解説：
When a Service Level Agreement (SLA) is applied to a WORKORDER object in IBM Maximo Manage v8.0 implementation, the Commitment Type that will be missing from the lookup is DELIVERY. The other possible Commitment Types in Maximo Manage are DOWNTIME, AVAILABILITY, and CONTACT.
質問 # 24
What are two of the filters in the Select Value of a Location or Asset in the Service Requests application?
- A. Service Group/Services
- B. Public
- C. Work Zones
- D. Service Address
- E. User/Custodians
正解：A、D
解説：
Two of the filters in the Select Value of a Location or Asset in the Service Requests application in IBM Maximo Manage are Service Address and Service Group/Services.
質問 # 25
To what type of objects can a Service Level Agreement be applied?
- A. any Main Object
- B. only the Main Object that are Internal
- C. only the objects based on the Work Order or Ticket Classes
- D. only the objects based on the Work Order or Ticket Classes, and Assets, Locations and Configuration Items
正解：D
解説：
A Service Level Agreement can be applied only to objects based on the Work Order or Ticket Classes, and Assets, Locations and Configuration Items.
質問 # 26
In which status can a Job Plan be modified to add a new task?
- A. REVISED
- B. INACTIVE
- C. NEW
- D. PNDREV
正解：A
質問 # 27
When viewing a Storeroom in the Manage Inventory Work Center, what are three record sets (tabs) that can be viewed?
- A. Balances
- B. Vendors
- C. Reconcile
- D. Counts
- E. Child Storerooms
- F. Year to Date Figures
正解：A、D、E
解説：
In IBM Maximo Manage v8.0 implementation, when viewing a Storeroom in the Manage Inventory Work Center, the three record sets (tabs) that can be viewed are Child Storerooms, Counts, and Balances. These record sets provide different views of the inventory and allow users to manage and track inventory levels and movements.
質問 # 28
Which limit is used to trigger a Condition Monitoring Point with a GAUGE Meter Type?
- A. Warning Limit
- B. Meter Limit
- C. Action Limit -
- D. Measurement Limit
正解：C
解説：
In IBM Maximo Manage, the Action Limit is used to trigger a Condition Monitoring Point with a GAUGE Meter Type.
質問 # 29
In which three applications can Asset Depreciation be configured?
- A. Chart of Accounts
- B. Tools
- C. Asset Templates
- D. Locations
- E. Item Master
- F. Assets
正解：C、D、F
解説：
Asset Depreciation can be configured in three applications in IBM Maximo Manage v8.0 according to IBM's documentation. These applications are:
Asset Templates
Assets
Locations
質問 # 30
When users are added to multiple security groups, the authorization privileges of the security groups combine, with the exception of security groups with which setting?
- A. Autonomous
- B. Independent
- C. Discreet
- D. Separate
正解：B
解説：
When users are added to multiple security groups, the authorization privileges of the security groups combine, with the exception of security groups with the "Independent" setting. When a security group has the "Independent" setting, its authorization privileges are applied separately from any other security group that the user belongs to.
質問 # 31
In the Purchase Requisitions application and with default settings, what status does the Purchase Requisition change to when all of its lines have been copied to a Purchase Order or a Contract?
- A. COMPLETE
- B. CLOSE
- C. INPRG
- D. APPR
正解：A
解説：
In the Purchase Requisitions application with default settings in IBM Maximo Manage, when all lines of a Purchase Requisition have been copied to a Purchase Order or a Contract, the status of the Purchase Requisition changes to COMPLETE.
質問 # 32
How is the Lock Out / Tag Outs application structured?
- A. Specify a Lock Out on the Location or Asset and define the Tag Out Operations.
- B. Specify a Lock Out on an Asset with a Locking Device and define the Tag Out Operations.
- C. Specify a Tag Out on the Location or Asset and define the Lock Out Operations.
- D. Define the isolation procedures on a set of related assets and specify a sequence.
正解：A
解説：
In IBM Maximo Manage v8.0 implementation, the Lock Out / Tag Out application is structured such that you specify a Lock Out on the Location or Asset and define the Tag Out operations. This application is used to manage the procedures and controls put in place to protect personnel from injury due to unintended or inadvertent equipment or system operation.
質問 # 33
Which Maximo Application Suite add-on enables managing certificates for assets and training requirements for personnel?
- A. Asset Configuration Manager
- B. Service Provider
- C. Maximo HR Manager
- D. Health, Safety and Environment (HSE)
正解：D
解説：
The Health, Safety and Environment (HSE) add-on in the IBM Maximo Application Suite enables managing certificates for assets and training requirements for personnel. This add-on provides functionality for managing health and safety risks, including compliance with regulations, management of environmental incidents, and tracking of personnel certifications and training.
質問 # 34
Which application in the IBM Maximo Application Suite uses both Al and remote human-based interactions to help technicians receive on-demand assistance?
- A. Maximo Safety
- B. Maximo Monitor
- C. Maximo Manage
- D. Maximo Assist
正解：D
解説：
Maximo Assist uses both Al and remote human-based interactions to help technicians receive on-demand assistance.
質問 # 35
......
IBM C1000-132認定試験は、知識とスキルの厳密なテストであり、試験に合格した個人は、IBM Maximo Manage V8.0を実装および管理する能力に自信を持つことができます。認定試験は、エンタープライズアセット管理の分野でキャリアを促進しようとしている個人にとって重要な資格であり、競争力のある雇用市場で専門家が際立っているのを助けることができます。
C1000-132試験問題集、C1000-132練習テスト問題：https://jp.fast2test.com/C1000-132-premium-file.html