[Q29-Q53] Network Appliance NS0-183認証された練習解答、必ずあなたを試験合格させる！[2024]

Network Appliance NS0-183認証された練習解答、必ずあなたを試験合格させる！[2024]

有効な合格方法NetApp NCSIE ONTAPのNS0-183試験問題集

NS0-183の認定試験は、NetAppストレージシステムを扱うITプロフェッショナルにとって貴重な資格証明です。この認定は、候補者がNetAppストレージシステムを効果的にインストール、設定、管理するための知識とスキルを持っていることを雇用主や顧客に示すものです。この認定はまた、キャリアアップの機会、高い報酬、そして雇用の安定性につながることがあります。

Network Appliance NS0-183認定試験は、NetAppストレージインストールエンジニア、ONTAPでの候補者の知識とスキルを試験する包括的な試験です。試験は、NetAppストレージシステム、プロトコル、データ管理、ツールなど、幅広いトピックをカバーしています。候補者は、NetAppのトレーニングコース、学習資料、練習問題を活用して試験の準備ができます。NS0-183認定試験は、NetAppストレージシステムを扱うIT専門家にとって、キャリアアップの機会、高い給与、そして職場での安定性をもたらす貴重な資格です。

質問 # 29
You are completing an ONTAP base installation, and your customer is asking you to create two SVMs, one for NFS and one for SMB.
Which type of SVM needs to be created to complete the installation?

A. admin SVM
B. data SVM
C. system SVM
D. multitenancy node SVM

正解：B

質問 # 30
After setting up a new cluster, you run an AutoSupport message for a test.
Which two commands would you use to proof the functionality and settings of AutoSupport? (Choose two.)

A. system node autosupport history show
B. system node autosupport option show
C. system node autosupport show
D. system node autosupport show history

正解：A、C

質問 # 31
After completing a technology refresh, you need to schedule a knowledge transfer with a customer. The customer asks you to address a number of topics during the meeting.
In this scenario, which two topics would be appropriate to address? (Choose two.)

A. performing database application data migrations
B. registering for access to the NetApp Support site
C. accessing internal NetApp KB articles
D. logging the customer support calls

正解：A、B

質問 # 32
Click the Exhibit button.

Referring to the exhibit, what information is forwarded to syslog after you enter the scripted install commands? (Choose two.)

A. SNMP traps
B. EMS messages
C. command history
D. AutoSupport messages

正解：B、C

質問 # 33
Before installing an 8-node cluster for a customer, you want to validate compatibility with existing hardware.
Which two tools would you use to validate the configuration? (Choose two.)

A. Active IQ Config Advisor
B. Active IQ System Manager
C. Hardware Universe
D. Interoperability Matrix Tool

正解：C、D

質問 # 34
While testing a recently installed FAS8700 cluster, a node fails. You now need to replace the impaired node.
In this scenario, which two statements are true? (Choose two.)

A. A controller model of the same type must be used to replace the impaired node.
B. You can change any drives or disk shelves as part of this replacement procedure.
C. The boot device must remain intact and must not be removed from the impaired node.
D. You must move the boot device from the impaired node to the replacement node.

正解：A、D

解説：
Explanation/Reference: https://library.netapp.com/ecm/ecm_download_file/ECMP1147156 (2)

質問 # 35
Which statement regarding Epsilon is true?

A. Whenever a new node is added, the epsilon is automatically reassigned to this node.
B. The node holding the epsilon has extra fractional vote weight.
C. The epsilon acts as a tiebreaker in a 2-node cluster.
D. Epsilon is reassigned automatically to the HA partner in case the current owner of the epsilon suddenly reboots.

正解：B

質問 # 36
You have a 6-node ONTAP 9.1 cluster with two FAS6290 nodes and four FAS8080 EX nodes using a SAN protocol.
In this scenario, how many FAS9000 HA pairs would be joined to this cluster?

A. 0
B. 1
C. 2
D. 3

正解：C

質問 # 37
You configured AutoSupport and are trying to send a full AutoSupport message to NetApp.
You use the autosupport history showcommand and see the output shown in the exhibit.

The customer confirms that the AutoSupport settings are correct.
Which two actions will solve this issue? (Choose two.)

A. The customer needs to change the transport protocol to HTTP.
B. The customer needs to enable AutoSupport for both nodes.
C. The customer needs to white-list the two nodes on their mail server.
D. The customer needs to exclude the two nodes from the attachment-size limitation.

正解：B、C

質問 # 38
You have just finished installing and configuring an ONTAP cluster for a customer.
In this scenario, which product collects information and produces site documentation?

A. Active IQ OneCollect
B. SnapGathers
C. NetAppDocs
D. Inventory Collect Tool

正解：C

解説：
Explanation/Reference: http://197.253.9.244/ontap%209-5/Cluster%20Admin/2_Student%20Guide/STRSW-ILT- ONTAPADM_StudentGuide.pdf

質問 # 39
Click the Exhibit button.

You are receiving AutoSupport e-mail from both controllers, but Active IQ is showing updates from only node cl-01-02.
Referring to the exhibit, what is a reason why Active IQ is receiving AutoSupport updates from only node cl-01-02?

A. The mail host is blocking the AutoSupport.
B. A firewall rule is blocking the AutoSupport.
C. The cluster management LIF is down.
D. The service processor is not configured.

正解：B

質問 # 40
You are planning to install a new ONTAP 9.7 All SAN Array (ASA) into your existing data center.
In this scenario, which cluster configuration is allowed with ASA controllers?

A. Add the ASA controllers to an existing 10-node cluster.
B. ASA controllers can only be installed as a standalone HA pair.
C. Add the ASA controllers to an existing 4-node cluster with NAS licenses.
D. ASA controllers can only be added to clusters that have existing SAN licenses.

正解：B

解説：
https://docs.netapp.com/allsan/index.jsp?topic=%2Fcom.netapp.doc.dot-asa-config%2FGUID-C0C9B6EF-1AA7-429E-BB84-AC5F9E16D088.html

質問 # 41
Which hot-swappable transceiver is required to obtain full performance from a Cisco Nexus 3232C cluster-interconnect switch?

A. SFP+
B. SFP
C. QSFP+
D. QSFP28

正解：D

質問 # 42
In ONTAP 9.7 software, how many different replicated databases (RDBs) exist per node?

A. 0
B. 1
C. 2
D. 3

正解：D

質問 # 43
You have installed and configured a new AFF C190 cluster with ONTAP 9.7. Your customer wants you to install the latest version of ONTAP.
In this scenario, what are two methods to update ONTAP? (Choose two.)

A. Use the cluster image package get and cluster image update commands.
B. Use ONTAP System Manager to upload and install the new software image.
C. Use a USB drive with the new software image and let ONTAP automatically boot.
D. Use ONTAP System Manager to download and install the new software image.

正解：A、D

質問 # 44
You install a new FAS2650 HA with a DS224C disk shelf and ONTAP 9.5 on a customer site.

Referring to the exhibit, which steps are required to get an HA cabled system?

A. 1. Insert a cable from right controller port 0a to IOMB port 1, and from port 0b to IOMA port 4. 2. Insert a cable from left controller port 0a to IOMA port 1, and from port 0b to IOMB port 4. 3. Cable the out-of-band ACP.
B. 1. Insert a cable from right controller port 0a to IOMB port 2, and from port 0b to IOMA port 3. 2. Insert a cable from left controller port 0a to IOMA port 2, and from port 0b to IOMB port 3.
C. 1. Insert a cable from right controller port 0a to IOMA port 1, and from port 0b to IOMB port 3. 2. Insert a cable from left controller port 0a to IOMB port 1, and from port 0b to IOMA port 3.
D. 1. Insert a cable from right controller port 0a to IOMB port 2, and from port 0b to IOMA port 4. 2. Insert a cable from left controller port 0a to IOMA port 2, and from port 0b to IOMB port 4. 3. Cable the out-of-band ACP.

正解：C

質問 # 45
You have an AFF A400 cluster that is running ONTAP 9.7 software. You are asked to set up FlexCache for NFS volumes.
In this scenario, which statement is correct when implementing FlexCache?

A. No license is required.
B. A subscription license is required.
C. A capacity license is required.
D. A site license is required.

正解：C

解説：
Explanation/Reference: https://www.netapp.com/pdf.html?item=/media/7336-tr4743.pdf (27)

質問 # 46
A customer has an AFF A800 with 24 internal drives and is running out of storage capacity.
In this scenario, which action will solve this issue?

A. Attach an additional DS212C shelf, filled with drives.
B. Insert more internal SSD drives.
C. Attach an additional DS460C shelf, filled with drives.
D. Insert more internal NVMe SSD drives.

正解：D

質問 # 47
When you install a new ONTAP 9.7 4-node cluster, which network type is required?

A. peering network
B. intercluster network
C. cluster interconnect
D. data network

正解：C

解説：
Explanation/Reference: https://docs.netapp.com/ontap-9/topic/com.netapp.doc.dot-cm-nmg/Network%20and%20LIF%
20management.pdf

質問 # 48
While troubleshooting an issue with a newly installed system, you used the system controller environment show command.
In this scenario, which issue would be diagnosed with this command?

A. controller version issues
B. shelf cabling issues
C. controller configuration issues
D. controller hardware issues

正解：D

質問 # 49
You are installing a new FAS2750 cluster with 24 HDDs for a customer to run a NAS workload. The customer requests that the HA pair have only a single aggregate that is located on Node 1. Maximum capacity is required.
Which action must be performed to ensure that the customer's requests are satisfied?

A. Perform a takeover of Node 2 to ensure that it does not run.
B. Assign all the partitioned disks from Node 2 to Node 1, and create a single aggregate.
C. Assign all the data partitions from Node 2 to Node 1, and create a single aggregate.
D. Assign all data LIFs to Node 1.

正解：C

質問 # 50
You install a new FAS2650 HA with a DS224C disk shelf and ONTAP 9.5 on a customer site.

Referring to the exhibit, which steps are required to get an HA cabled system?

A. 1. Insert a cable from right controller port 0a to IOMB port 1, and from port 0b to IOMA port 4. 2. Insert a cable from left controller port 0a to IOMA port 1, and from port 0b to IOMB port 4. 3. Cable the out-of-band ACP.
B. 1. Insert a cable from right controller port 0a to IOMB port 2, and from port 0b to IOMA port 3. 2. Insert a cable from left controller port 0a to IOMA port 2, and from port 0b to IOMB port 3.
C. 1. Insert a cable from right controller port 0a to IOMA port 1, and from port 0b to IOMB port 3. 2. Insert a cable from left controller port 0a to IOMB port 1, and from port 0b to IOMA port 3.
D. 1. Insert a cable from right controller port 0a to IOMB port 2, and from port 0b to IOMA port 4. 2. Insert a cable from left controller port 0a to IOMA port 2, and from port 0b to IOMB port 4. 3. Cable the out-of-band ACP.

正解：C

質問 # 51
In an ONTAP switched cluster, which three types of traffic travels over the cluster network? (Choose three.)

A. cluster database replication
B. intercluster SnapMirror
C. intracluster SnapMirror
D. Epsilon voting
E. remote cluster peering

正解：A、C、D

質問 # 52
You are installing a new ONTAP 9.7 cluster and attaching the cluster to two separate networks. Your customer has indicated that the same range of client IP addresses are used on both networks and that the networks are never allowed to communicate with each other.
In this scenario, which ONTAP feature must be configured to securely allow all clients to access ONTAP NAS protocols?