あなたを合格させるNS0-183試験問題集で使おう（更新された61問があります)
NS0-183試験問題集でNetwork Appliance練習テスト問題
ネットワークアプライアンスNS0-183の認定試験は、NetAppストレージシステムをONTAPソフトウェアを使用して展開・管理するストレージインストールエンジニアの専門知識を証明するための重要な認定資格です。この認定試験は、ストレージ関連の幅広いトピックにおける候補者の知識とスキルを検証し、IT業界で貴重な資格として認められています。NS0-183試験に合格することで、候補者はキャリアの見通しを向上させ、ストレージインストールと管理の分野における専門的な開発への取り組みを証明することができます。
質問 # 21
You have just installed a new AFF A220 4-node cluster with ONTAP 9.5 for a customer.
Which two cluster switches are supported in this scenario? (Choose two.)
- A. Cisco MDS 9148S
- B. Cisco Nexus 5596UP
- C. NetApp CN1610
- D. Brocade 6510
正解：B、C
質問 # 22
What is the maximum port speed of an Ethernet port on a Cisco Nexus 3232C cluster-interconnect switch?
- A. 10GbE
- B. 200GbE
- C. 40GbE
- D. 100GbE
正解：C
質問 # 23
Which hot-swappable transceiver is required to obtain full performance from a Cisco Nexus 3232C cluster-interconnect switch?
- A. SFP+
- B. QSFP+
- C. SFP
- D. QSFP28
正解：D
質問 # 24
Which two NetApp features encrypt storage data? (Choose two.)
- A. NVMe
- B. TPM
- C. NSE
- D. NVE
正解：C、D
質問 # 25
After you deploy a 4-node AFF A220, you want to upgrade the ONTAP version of the cluster.
In this scenario, before the upgrade, which advanced CLI command is used to locate epsilon?
- A. cluster image show
- B. cluster show
- C. clustering ring show
- D. cluster ha show
正解：B
質問 # 26
Your customer regularly schedules disaster recovery tests to ensure the high availability capabilities of the ONTAP cluster.
In this scenario, which two commands would you use to perform this test? (Choose two.)
- A. system node run -node NetApp-Cluster-02 -command cf giveback
- B. storage failover takeover -of-node NetApp-Cluster-02
- C. system node run -node NetApp-Cluster-02 -command cf takeover
- D. storage failover giveback -of-node NetApp-Cluster-02
正解：B、D
質問 # 27
Click the Exhibit button.
You are adding new DS224C shelves in a new stack to your cluster with FAS8060 controllers running ONTAP 9.7.
Referring to the exhibit, which two actions should be performed to the cluster before installing the new shelves? (Choose two.)
- A. Disable out-of-band ACP.
- B. Remove the Ethernet cables.
- C. Enable in-band ACP.
- D. Move the SAS cables to a new stack.
正解：A、D
解説：
Explanation/Reference:
質問 # 28
After setting up a new cluster, you run an AutoSupport message for a test.
Which two commands would you use to proof the functionality and settings of AutoSupport? (Choose two.)
- A. system node autosupport history show
- B. system node autosupport show history
- C. system node autosupport show
- D. system node autosupport option show
正解：A、C
質問 # 29
Click the Exhibit button.
You are receiving AutoSupport e-mail from both controllers, but Active IQ is showing updates from only node cl-01-02.
Referring to the exhibit, what is a reason why Active IQ is receiving AutoSupport updates from only node cl-01-02?
- A. The service processor is not configured.
- B. A firewall rule is blocking the AutoSupport.
- C. The cluster management LIF is down.
- D. The mail host is blocking the AutoSupport.
正解：B
質問 # 30
You are installing a new AFF A400 cluster that is running ONTAP 9.7 software. You are asked to attach an Amazon S3 cloud tier for FabricPool technology.
In this scenario, which two NetApp License File (NLF) types are supported for cloud tiering? (Choose two.)
- A. base
- B. perpetual
- C. term-based
- D. master
正解：B、C
解説：
http://docs.netapp.com/ontap-9/index.jsp?topic=%2Fcom.netapp.doc.dot-mgng-stor-tier-fp%2FGUID-C3C125BF-44DA-409D-9F93-B73545FB336B.html
質問 # 31
Your customer wants to buy four new DS212C shelves with an 8 TB SATA drive. The customer also wants to know the usable aggregate size of this configuration.
In this scenario, which resource would you use to accomplish this task?
- A. Interoperability Matrix Tool (IMT)
- B. Hardware Universe (HWU)
- C. Fusion
- D. Config Advisor
正解：C
質問 # 32
You were asked to install a FAS9000 with two quad-port SAS PCI cards. The SAS PCI cards are installed in slot 9 and slot 1. In preparation for the installation, you are filling out the SAS cabling worksheet. In this scenario, which ports are used for the second stack?
- A. 9b/1b
- B. 9a/1a
- C. 9c/1a
- D. 9a/1d
正解：D
質問 # 33
You are asked to add a new HA pair to an existing 2-node switchless AFF A220 cluster. You must first convert to a 2-node switched cluster using Broadcom BES-53248 cluster switches.
Which two conditions must be fulfilled before you start the migration? (Choose two.)
- A. All cluster LIFs must have an MTU size of 1500.
- B. The 2-node switchless configuration must be properly set up and functioning.
- C. The "Enabled Switchless Cluster" option must be manually set to "false".
- D. All cluster LIFs must be in the up state and on their home ports.
正解：B、D
質問 # 34
You just installed a new AFF A220 2-node cluster without additional disk shelves. When you review the Config Advisor output, you notice that your SAS cabling appears to be single-path HA.
In this scenario, which statement is true?
- A. The Config Advisor version you are using requires a plugin for AFF controllers.
- B. Cable controller 1 0a to controller 2 0a, and cable controller 1 0b to controller 2 0b.
- C. AFF A220 controllers with internal disks support only single-path HA.
- D. Cable controller 1 0a to controller 2 0b, and cable controller 1 0b to controller 2 0a.
正解：D
質問 # 35
You are a NetApp Professional Services engineer, employed by NetApp. You have just completed an ONTAP cluster installation. You need to collect the relevant configuration information to enable the Service Event Report (SER) to be created.
Which tool would you use to accomplish this task?
- A. ONTAP System Manager
- B. Active IQ Config Advisor worksheet
- C. Active IQ scheduled reports
- D. NetAppDocs output report
正解：A
解説：
https://library.netapp.com/ecmdocs/ECMP1307349/html/GUID-08047CFA-4D59-4E35-B232-1B5FDBBBE0F0.html
質問 # 36
You complete a hardware installation on a CN1610 switch and establish a serial connection to the RJ45 port.
In this scenario, the established serial connection allows the installer to complete which two tasks for the switches initial configuration? (Choose two.)
- A. to view network information that has been dynamically assigned to the management interface by the DHCP server on the network
- B. to manually configure the static network information
- C. to configure the switch with another CN1610 switch using Cross-Stack EtherChannel configuration for load balancing and performance
- D. to use the serial port connection as a diagnostic channel to the second CN1610 switch in the cluster interconnect
正解：A、B
質問 # 37
Which LIF type is used by default for hardware-assisted storage failover communication?
- A. intercluster
- B. cluster-mgmt
- C. node-mgmt
- D. data
正解：C
質問 # 38
Click the Exhibit button.
You want to add a FAS2750 HA pair to an existing 6-node cluster.
Referring to the exhibit, which action would you perform to begin adding the node?
- A. Use the node setup wizard and select 0a as the management interface.
- B. Use the back command to begin the Cluster Setup wizard.
- C. Use the exit or quit commands then run the cluster setup command.
- D. Reboot the node and enter maintenance mode and run the Cluster Setup wizard.
正解：C
解説：
https://docs.netapp.com/ontap-9/index.jsp?topic=%2Fcom.netapp.doc.dot-cm-sag%2FGUID-B13FF812-785E-4E62-9914-30E7A8F51A4C.html
質問 # 39
You have installed and configured a new AFF C190 cluster with ONTAP 9.7. Your customer wants you to install the latest version of ONTAP.
In this scenario, what are two methods to update ONTAP? (Choose two.)
- A. Use the cluster image package get and cluster image update commands.
- B. Use ONTAP System Manager to upload and install the new software image.
- C. Use ONTAP System Manager to download and install the new software image.
- D. Use a USB drive with the new software image and let ONTAP automatically boot.
正解：A、C
質問 # 40
......
あなたをお手軽に合格させるNS0-183試験正確なPDF問題：https://jp.fast2test.com/NS0-183-premium-file.html