[2023年11月]更新のNetwork Appliance NS0-183問題集とリアルな試験問題
2023年最新のNS0-183のPDF最近更新された問題
NS0-183試験は、合格するためにかなりの量の準備と研究を必要とする包括的な試験です。候補者は、アーキテクチャ、機能、機能など、NetAppストレージシステムを深く理解することが期待されています。さらに、候補者は、ネットワーキングとストレージの概念を強く理解し、ストレージシステムでの作業経験があることが期待されています。
質問 # 16
In an ONTAP switched cluster, which three types of traffic travels over the cluster network? (Choose three.)
- A. remote cluster peering
- B. intracluster SnapMirror
- C. cluster database replication
- D. Epsilon voting
- E. intercluster SnapMirror
正解：A、C、E
質問 # 17
You completed the installation of an AFF A700s with NetApp CN1610 switches. You used ports e0a and e0f with breakout cables to connect the controllers to the interconnect switches. After completing the cluster setup, ports e0e and e0i are not visible in OnCommand System Manager. In this scenario, what caused this problem?
- A. This is a hardware error and you must open a case with NetApp Support.
- B. You are missing a license to enable those ports.
- C. Breakout cables were used and the second port on the same ASIC became disabled.
- D. You must first enable the ports using the network port modifycommand.
正解：D
質問 # 18
After completing the installation of an AFF A800 ONTAP AI cluster, you are asked which contacts are available for additional help in obtaining immediate assistance in solving P1 issues.
In this scenario, what do you tell the customer?
- A. Use Guided Problem Solving.
- B. Use the NetApp KB TV channel.
- C. Contact NetApp Support by telephone.
- D. Contact NetApp Support using chat.
正解：C
質問 # 19
What are two ONTAP storage efficiency technologies that would be used on an AFF A400 cluster? (Choose two.)
- A. Flash Pool
- B. FlexClone volumes
- C. FlashCache
- D. thin provisioning
正解：A、C
質問 # 20
Click the Exhibit button.
You are reviewing the setup of a recently installed FAS9000 switched cluster. As shown in the exhibit, the cluster interconnects are connected to a pair of Cisco Nexus 3132Q-V 40 Gb ports.
For a high availability, which ports should swap Ethernet cables?
- A. Swap node2:e4a and node2:e8a.
- B. Swap node1:e4a and node1:e8a.
- C. Swap node1:e8a and node2:e4a.
- D. Swap node1:e4a and node2:e4b.
正解：C
質問 # 21
Which NetApp tool should you use to set up an ONTAP 9.5 cluster?
- A. System Setup
- B. Config Advisor
- C. OnCommand System Manager
- D. SANtricity Storage Manager
正解：B
質問 # 22
When completing a new ONTAP 9.5 cluster base installation, which three SVM types will be present on the system by default? (Choose three.)
- A. cluster SVM
- B. data SVM
- C. admin SVM
- D. node SVM
- E. system SVM
正解：C、D、E
質問 # 23
You have a 6-node ONTAP 9.1 cluster with two FAS6290 nodes and four FAS8080 EX nodes using a SAN protocol.
In this scenario, how many FAS9000 HA pairs would be joined to this cluster?
- A. 0
- B. 1
- C. 2
- D. 3
正解：B
質問 # 24
You configured AutoSupport and are trying to send a full AutoSupport message to NetApp.
You use the autosupport history showcommand and see the output shown in the exhibit.
The customer confirms that the AutoSupport settings are correct.
Which two actions will solve this issue? (Choose two.)
- A. The customer needs to change the transport protocol to HTTP.
- B. The customer needs to enable AutoSupport for both nodes.
- C. The customer needs to exclude the two nodes from the attachment-size limitation.
- D. The customer needs to white-list the two nodes on their mail server.
正解：B、D
質問 # 25
You use the system health subsystem show command to troubleshoot your newly installed ONTAP cluster.
In this scenario, which two health outputs would this command show you? (Choose two.)
- A. shelf connectivity
- B. cluster switch cabling
- C. data switch cabling
- D. node CPU utilization
正解：A、B
質問 # 26
According to NetApp best practices, how many NTP servers should you associate with an ONTAP cluster?
- A. 0
- B. 1
- C. 2
- D. 3
正解：B
質問 # 27
While testing a recently installed FAS8700 cluster, a node fails. You now need to replace the impaired node.
In this scenario, which two statements are true? (Choose two.)
- A. You must move the boot device from the impaired node to the replacement node.
- B. The boot device must remain intact and must not be removed from the impaired node.
- C. You can change any drives or disk shelves as part of this replacement procedure.
- D. A controller model of the same type must be used to replace the impaired node.
正解：A、D
解説：
Explanation/Reference: https://library.netapp.com/ecm/ecm_download_file/ECMP1147156 (2)
質問 # 28
Click the Exhibit button.
You want to add a FAS2750 HA pair to an existing 6-node cluster.
Referring to the exhibit, which action would you perform to begin adding the node?
- A. Use the exit or quit commands then run the cluster setup command.
- B. Use the back command to begin the Cluster Setup wizard.
- C. Use the node setup wizard and select 0a as the management interface.
- D. Reboot the node and enter maintenance mode and run the Cluster Setup wizard.
正解：A
解説：
https://docs.netapp.com/ontap-9/index.jsp?topic=%2Fcom.netapp.doc.dot-cm-sag%2FGUID-B13FF812-785E-4E62-9914-30E7A8F51A4C.html
質問 # 29
Which three components are required when setting up a new ONTAP cluster? (Choose three.)
- A. cluster management IP
- B. password
- C. Advanced Drive Partitioning
- D. node management IP
- E. intercluster IP
正解：A、B、D
質問 # 30
You are installing a new ONTAP 9.7 cluster and attaching the cluster to two separate networks. Your customer has indicated that the same range of client IP addresses are used on both networks and that the networks are never allowed to communicate with each other.
In this scenario, which ONTAP feature must be configured to securely allow all clients to access ONTAP NAS protocols?
- A. broadcast domains
- B. routing
- C. BGP
- D. IPspaces
正解：A
質問 # 31
You want to ensure the highest path resilience and performance increase to the storage stack on your FAS8700 cluster.
In this scenario, which two types of stack cabling are available to use? (Choose two.)
- A. multipath HA
- B. quadpath HA
- C. single path
- D. mixed-mode
正解：A、B
質問 # 32
Which two SVMs are automatically created during the cluster setup? (Choose two.)
- A. node SVM
- B. data SVM
- C. admin SVM
- D. system SVM
正解：C、D
質問 # 33
......
ネットワークアプライアンスNS0-183認定試験は、ITの専門家がNetAppストレージソリューションの専門知識を認識するための優れた方法です。この試験はグローバルに認識されており、ITの専門家がストレージの設置と構成の習熟度を実証する優れた方法です。さらに、この認定試験は、ITの専門家が最新のNetAppテクノロジーを最新の状態に保ち、クライアントに可能な限り最高のソリューションを提供できるようにするための優れた方法です。
NS0-183 試験は、NetApp ストレージシステムに関連する幅広いトピックをカバーする包括的なテストです。試験が試験する主要な領域には、NetApp ストレージハードウェアおよびソフトウェアのインストールと設定、NFS、CIFS、iSCSI、および FCP などのストレージプロトコルの実装と設定、および NetApp ストレージシステムのパフォーマンス分析とトラブルシューティングが含まれます。試験は、MetroCluster および SnapMirror などの高可用性および災害復旧の概念に関する候補者の知識もテストします。
最新のNS0-183合格保証される試験問題集認証サンプル問題：https://jp.fast2test.com/NS0-183-premium-file.html