2022年最新ののNetwork Appliance NS0-183リアル試験問題集PDF
NS0-183試験問題集、NS0-183練習テスト問題
Network Appliance NS0-183 認定試験の出題範囲：
| トピック | 出題範囲 |
|---|---|
| トピック 1 |
|
| トピック 2 |
|
| トピック 3 |
|
| トピック 4 |
|
| トピック 5 |
|
| トピック 6 |
|
質問 26
Your customer wants to buy four new DS212C shelves with an 8 TB SATA drive. The customer also wants to know the usable aggregate size of this configuration.
In this scenario, which resource would you use to accomplish this task?
- A. Interoperability Matrix Tool (IMT)
- B. Fusion
- C. Hardware Universe (HWU)
- D. Config Advisor
正解: B
質問 27
A customer has an AFF A800 with 24 internal drives and is running out of storage capacity.
In this scenario, which action will solve this issue?
- A. Attach an additional DS212C shelf, filled with drives.
- B. Insert more internal NVMe SSD drives.
- C. Attach an additional DS460C shelf, filled with drives.
- D. Insert more internal SSD drives.
正解: B
質問 28
What are two ONTAP storage efficiency technologies that would be used on an AFF A400 cluster? (Choose two.)
- A. FlashCache
- B. FlexClone volumes
- C. thin provisioning
- D. Flash Pool
正解: B,C
解説:
https://docs.netapp.com/ontap-9/index.jsp?topic=%2Fcom.netapp.doc.dot-cm-concepts%2FGUID-8A8108CF-499A-46FC-917F-A40FAD68C8D6.html
質問 29
After setting up a new cluster, you run an AutoSupport message for a test.
Which two commands would you use to proof the functionality and settings of AutoSupport? (Choose two.)
- A. system node autosupport history show
- B. system node autosupport show history
- C. system node autosupport option show
- D. system node autosupport show
正解: A,D
質問 30
You just installed two nodes into an existing ONTAP cluster.
When running date on the CLI you notice that the cluster1-03 node is running behind time. You confirmed that you can reach the node management LIF of each node.
Referring to the exhibit, which statement is true?
- A. The NTP is adjusting in small increments.
- B. The node-management LIF has to be on e0M for NTP to work.
- C. No NTP server is configured for this node.
- D. The DNS is not configured for this node.
正解: D
質問 31
You are installing a new 2-node AFF A220 cluster running ONTAP 9.5. The customer would like to use the UTA2 adapters from the first controller to connect to the 10GbE front-end switches. On the second controller, they would like to use the first UTA2 port as a target FC port, and the second as an FC initiator. In this scenario, according to NetApp Best practices, what should your customer do?
- A. Change all the UTA2 ports from CNA mode to FC mode.
- B. Change the first two ports of each controller to FC and the last two to CNA.
- C. Change the UTA2 ports from CNA mode to FC mode on the first controller.
- D. Change all the UTA2 ports to CNA to support both FC and Ethernet.
正解: B
質問 32
You must replace a FAS2750 switchless cluster with an AFF A220 switchless cluster for a customer. The customer requires that you transfer the data from the FAS2750 cluster to the AFF A220.
In this scenario, which two methods would you use to migrate the customer's data? (Choose two.)
- A. Establish an SVM-DR relationship between the two clusters and activate the destination SVM.
- B. Install SAS cables between the two clusters and use the vol move command.
- C. Provide cluster switches and build a 4-node cluster, then use the vol move command.
- D. Remove all of the HDD drives from the FAS cluster and install them into the AFF cluster.
正解: B,C
質問 33
According to NetApp best practices, how many NTP servers should you associate with an ONTAP cluster?
- A. 0
- B. 1
- C. 2
- D. 3
正解: B
質問 34
After completing a technology refresh, you need to schedule a knowledge transfer with a customer. The customer asks you to address a number of topics during the meeting.
In this scenario, which two topics would be appropriate to address? (Choose two.)
- A. performing database application data migrations
- B. accessing internal NetApp KB articles
- C. registering for access to the NetApp Support site
- D. logging the customer support calls
正解: A,C
質問 35
A customer has a 6-node AFF A700 cluster and wants to add four nodes without having to update license functionality for each node manually. In this scenario, which type of license provides this functionality?
- A. Site License
- B. Standard License
- C. Evaluation License
- D. Demo License
正解: A
質問 36
You are installing a new ONTAP 9.7 cluster and attaching the cluster to two separate networks. Your customer has indicated that the same range of client IP addresses are used on both networks and that the networks are never allowed to communicate with each other.
In this scenario, which ONTAP feature must be configured to securely allow all clients to access ONTAP NAS protocols?
- A. IPspaces
- B. routing
- C. BGP
- D. broadcast domains
正解: A
解説:
https://www.netapp.com/media/16885-tr-4182.pdf 9.3 Multiple IPspaces with Overlapping IP Addresses
質問 37
You are installing a new ONTAP 9.7 cluster by following the installation and setup poster. You are ready to complete the initial cluster setup. You have connected your laptop to the management switch. However, when browsing the network, you are unable to discover the ONTAP controllers.
Which statement explains this behavior?
- A. You do not have a static IP address.
- B. You do not have network discovery enabled.
- C. You do not have a default gateway set.
- D. You do not have IPv6 configuration set.
正解: B
解説:
https://docs.netapp.com/platstor/index.jsp?topic=%2Fcom.netapp.doc.hw-a800-install-setup%2FGUID-91C7E4FC-5B24-414C-ABF3-F2AAD1E465B1.html network discovery is not enabled on your laptop
質問 38
Click the Exhibit button.
A customer has a 2-node FAS8200 cluster with four DS212C shelves with 10 TB SATA drives.
Referring to the exhibit, an aggregate will be created with which default RAID type?
- A. RAID_TEC
- B. RAID4
- C. RAID1
- D. RAID_DP
正解: A
質問 39
You completed an ONTAP cluster deployment as a reseller engineer. During the knowledge transfer process to the customer, they ask for proof that the array has correct multi-path HA cabling deployed and that the array is error free.
Which documentation output would you present to the customer to satisfy this requirement?
- A. Active IQ Unified Manager output
- B. Active IQ OneCollect output
- C. Config Advisor output
- D. NetAppDocs output
正解: C
質問 40
You are installing a pair of Cisco Nexus 3132Q-V cluster switches and receive several syntax errors when the reference configuration file (RCF) is applied.
In this scenario, what are two reasons for these errors? (Choose two.)
- A. An RCF file for a different version has been loaded.
- B. The switch was not in maintenance mode.
- C. Cables were not removed before applying the RCF.
- D. The RCF was already applied.
正解: A,D
質問 41
Click the Exhibit button.
You are setting up a new AFF A700 into a new rack at a customer's site. The customer asks you to plan for simplified future growth.
Referring to the exhibit, how would you satisfy this requirement?
- A. Option 2
- B. Option 1
- C. Option 4
- D. Option 3
正解: B
解説:
https://library.netapp.com/ecm/ecm_download_file/ECMM1280394
質問 42
Which statement is true about cluster interconnect?
- A. It is a management network for cluster administration and can be used for interconnect LIFs.
- B. It transports the data between nodes if a Data LIF has a non-optimized path.
- C. It provides the core data network communication.
- D. It is needed for the replication network between clusters.
正解: B
質問 43
You are setting up a new AFF A400 that will serve iSCSI LUNs. You will have four iSCSI SVMs that each need to connect to an Internet Storage Name Service (iSNS) for discovery and management purposes.
In this scenario, which network interface is needed for each SVM to register with the name service?
- A. SVM management LIF
- B. node management LIF
- C. SVM data LIF
- D. intercluster LIF
正解: D
解説:
Explanation/Reference:
質問 44
You want to verify that connections are cables correctly and that shelf IDs are unique within an HA pair.
Which tool would be used to accomplish these tasks?
- A. Active IQ Unified Manager
- B. Active IQ Config Advisor
- C. Cloud Insights
- D. System Diagnostics
正解: D
質問 45
......
PDF問題（2022年最新）実際のNetwork Appliance NS0-183試験問題：https://jp.fast2test.com/NS0-183-premium-file.html