[2025年10月31日] 最新のHPE0-S59試験の的確なHPE Compute SolutionsのPDF問題
HPE0-S59試験問題を練習するならFast2test顕著なHPE Compute Solutions試験練習問題集
質問 # 43
Your customer wants to add dedicated Fibre Channel connectivity to the HPE Synergy frame running HPE Synergy 480 Gen10 compute modules, each with one CPU socket populated Currently they use two 12 Gb SAS switches and two HPE Virtual Connect SE 100Gb F32 Modules for HPE Synergy installed in third fabric.
What must be done to enable dedicated FC connectivity for this HPE Synergy frame?
- A. For VC-FC modules, all of server facing ports must be property licensed.
- B. For Brocade switches, a logical interconnect group must be created in HPE OneView.
- C. SAS switches must be moved to second fabric and FC modules Installed in the first one.
- D. A second CPU must be installed for all HPE Synergy 480 Gen10 compute nodes.
正解：B
解説：
To enable dedicated Fibre Channel (FC) connectivity in an HPE Synergy frame, if using Brocade switches, it is necessary to create a logical interconnect group in HPE OneView. This group defines the configuration and management of FC connectivity for the compute modules. Properly configuring and managing this logical interconnect group ensures that the compute modules can establish dedicated FC connections.
質問 # 44
As a result of the troubleshooting process, you recommend replacing, HPE Synergy Composer modules which HPE Synergy Composer 2.
Why would you recommend this change?
- A. HPE Composer 1 cannot support remote frames, which doubles the configuration and management procedures effort
- B. HPE Composer 2 can support more than the maximum 21 frames that are supported with HPE Composer 1 and HPE OneView.
- C. HPE Composer 1 running HPE OneView 5 2 or later can support only 12 frames within a single management nog
- D. HPE Composer 2 provides access to 105 interface that can be used for full management of HPE Composer 2 remotely
正解：B
解説：
HPE Composer 2 offers enhanced scalability compared to HPE Composer 1. While HPE Composer 1 and HPE OneView support up to 21 frames, HPE Composer 2 extends this limit, allowing for greater scalability and more efficient management of larger HPE Synergy environments. This makes HPE Composer 2 a suitable recommendation for customers needing to manage more than 21 frames.
質問 # 45
Which statement about the HPE D3940 storage module is true?
- A. Up to five modules can be installed in a single frame with Gen10 servers
- B. Only one type of drives (SATA, SAS, SSD) can be installed in each module
- C. SATA drives requires redundant 10 adapters to be installed in this module
- D. it is configured through CLl available from HPE Synergy console
正解：A
解説：
The HPE D3940 storage module is designed to provide flexible and scalable storage within the HPE Synergy platform. Up to five D3940 storage modules can be installed in a single HPE Synergy frame when used with Gen10 servers. This configuration allows for high-density storage solutions within a single frame, making it ideal for environments that require substantial storage capacity.
質問 # 46
Your customer plans to deploy a VMware ESXi with HPE Synergy platform. They also plan a vSAN deployment leveraging HPE D3940 Storage Modules and SSD drives. The customer requested the following components:
- HPE Synergy frame with ten HPE Synergy 480 Gen10 Plus compute modules
- Two HPE Virtual Connect SE 100Gb F32 Modules for Synergy
- An appropriate number of vSAN Standard licenses for each compute node
- One HPE O3940 Storage Module with 40 SSDs - All required cables and
options
Which statement about this request is true?
- A. One HPE Virtual Connect SE 100Gb F32 Module for Synergy should be replaced with 50GD/S ILM
- B. vSphere Standard licenses should be replaced with Enterprise Plus licenses to enable vSAN
- C. vSphere licenses should be added, as vSAN licenses do not replace vSphere licenses
- D. 20 SSD drives should be removed from this setup, as D3940 supports only 20 SSD or SAS drives.
正解：C
解説：
vSAN licenses and vSphere licenses are separate entities. While vSAN licenses cover the storage virtualization aspect of VMware's hyper-converged infrastructure, vSphere licenses are required for the actual hypervisor operations. Therefore, the customer must ensure they have the appropriate vSphere licenses in addition to vSAN licenses for their compute nodes.
質問 # 47
The proposal consists of:
- 3 HPE Synergy 12000 frames
- 6 HPE Composer 2 modules
- 2 HPE Virtual Connect SE 100 GO F32 Module
- 4 HPE Synergy 50 GO interconnect Link Module
Which statements about this proposed design are true? (Select two.)
- A. The selected interconnect modules do not provide the requested WWN virtualization
- B. The current setup can support up to 18 HPE Synergy 480 Gen10 Plus compute modules
- C. Remove 4 HPE Composer 2 modules from the design, as they are not required
- D. HPE Synergy 50Gb ILMs must be replaced with HPE Virtual Connect SE 100 GO F32 modules
- E. FC upgrade licenses for HPE Virtual Connect SE 100 GbF32 Module must be added
正解：B、E
解説：
C: The current setup can support up to 18 HPE Synergy 480 Gen10 Plus compute modules.
This is true because the HPE Synergy 12000 frames support a maximum of 18 compute modules, and with the design specifying 3 frames, this setup can indeed support up to 18 HPE Synergy 480 Gen10 Plus compute modules.
D: FC upgrade licenses for HPE Virtual Connect SE 100 GbF32 Module must be added.
This is correct because the HPE Virtual Connect SE 100 GbF32 Module typically requires FC upgrade licenses to enable Fibre Channel functionality. If FC is needed for the environment, those licenses should be included.
質問 # 48
Match HPE Superdome Flex system with its specific feature.
正解：
解説：
Explanation:
Here are the correct matches for each HPE Superdome Flex system with its respective feature:
* HPE Superdome Flex
* Support for 32 sockets and 48TB of memory
* Support for nPar with 16 sockets
* HPE Superdome Flex 280
* Maximum of 24TB memory
* Minimum of 768 GB of memory
* HPE Superdome Flex:
* Support for 32 sockets and 48TB of memory: The HPE Superdome Flex system is designed for extremely large-scale workloads and can support configurations with up to 32 CPU sockets and
48TB of memory.
* Support for nPar with 16 sockets: This system supports nPartitions (nPars) with configurations that can include up to 16 CPU sockets, providing flexible partitioning and resource allocation.
* HPE Superdome Flex 280:
* Maximum of 24TB memory: The HPE Superdome Flex 280 supports a maximum memory capacity of 24TB, suitable for large but not as massive workloads compared to the full Superdome Flex.
* Minimum of 768 GB of memory: The minimum memory configuration for the HPE Superdome Flex 280 is 768 GB, ensuring a base level of performance and capacity for smaller deployments.
質問 # 49
An administrator tries to open iLO interlace from HPE OneView Instead of being automatically logged in a login prompt displays.
Where should you start the troubleshooting process?
- A. At HPE OneView Interface to verify whether the server is In the maintenance mode
- B. At HPE OneView Interface to verify whether the iLO processor is disabled
- C. At the iLO interface to verify whether the SSO certificate is removed from an iLO
- D. At the iLO interface to verify whether the ILO Advanced license is properly applied
正解：C
解説：
When the iLO interface prompts for a login instead of automatically logging in via HPE OneView, a common issue is that the Single Sign-On (SSO) certificate might have been removed or is not properly configured on the iLO. Verifying the presence and validity of the SSO certificate on the iLO interface is a critical step in troubleshooting this issue.
質問 # 50
Your customer has the following HPE Synergy setup:
- 15 HPE Synergy 12000 frames with 50Gb connectivity to each server port
- 2 HPE Composer 2 modules
- 15 HPE D3940 Storage Modules, one per frame
- 2 HPE 12Gb SAS switches per frame
Which statement about this setup is true?
- A. To manage 15 frames, additional HPE Composers are required.
- B. The customer can install up to 12 HPE Synergy 480 compute nodes per frame.
- C. If properly cabled, any compute node can access any HPE D3490 storage module
- D. The customer must create at least five logical enclosures for this setup.
正解：D
解説：
With 15 HPE Synergy 12000 frames, the customer must create multiple logical enclosures to manage the setup efficiently. HPE Synergy typically supports up to five frames per logical enclosure, meaning that at least five logical enclosures would be necessary to manage all 15 frames. This ensures proper organization, management, and scalability of the resources.
質問 # 51
Your customer plans to deploy HPE Superdome Flex and configure two nPars, each based on two chassis Which components must be included in the proposal to meet the customer's needs?
- A. HPE Superdome Flex Grid licenses enabling connectivity between chassis
- B. At least Tour HPE Persistent Memory DIMMs per nPar
- C. One base chassis and three expansion chassis with licenses
- D. Rack Management Controller for nPar management
正解：D
解説：
To deploy HPE Superdome Flex and configure two nPars, each based on two chassis, you must include the HPE Superdome Flex Grid licenses. These licenses enable connectivity between the chassis, allowing the creation of nPars (nPartitions) that span multiple chassis. This is essential for the system's proper configuration and operation in a multi-chassis nPar setup.
質問 # 52
Match HPE SimpliVity team with the definition.
正解：
解説：
質問 # 53
Drag and Drop Question
Match each HPE Synergy logical component with the definition.
正解：
解説：
質問 # 54
A junior architect designed a solution based on HPE Synergy that must meet the following requirements:
- Support at least 30 HPE Synergy 480 Gen10 Plus compute modules
- Interconnect modules must provide MAC and WWN virtualization
- All HPE Synergy frames must formulate a single management entity
- The management appliance should not be a single point of failure
- Connectivity to FC array should be available to all compute nodes
The proposal consists of:
- 3 HPE Synergy 12000 frames
- 6 HPE Composer 2 modules
- 2 HPE Virtual Connect SE 100Gb F32 Module
- 4 HPE Synergy 50Gb Interconnect Link Module
Which statements about this proposed design are true? (Select two)
- A. HPE Synergy 50Gb ILMs must be replaced with HPE Virtual Connect SE 100Gb F32 modules.
- B. Remove 4 HPE Composer 2 modules from the design, as they are not required.
- C. The current setup can support up to 18 HPE Synergy 480 Gen10 Plus compute modules.
- D. The selected interconnect modules do not provide the requested WWN virtualization.
- E. FC upgrade licenses for HPE Virtual Connect SE 100Gb F32 Module must be added.
正解：B、D
質問 # 55
Hotspot Question
Click the area within the management interface that will allow you to check whether an HPE OneView SSO certificate is properly applied.
正解：
解説：
Explanation:
The area to check for the HPE OneView SSO certificate is under Security, then HPE SSO.
Security: This section deals with all security-related settings, including certificates.
HPE SSO: This stands for "Single Sign-On" and is the specific technology that HPE OneView uses for integrated authentication. The certificate will be listed here if it's properly applied.
To get to this section, you would click on "Security" in the left-hand navigation menu, and then
"HPE SSO" in the main content area.
質問 # 56
Click the drop-down menu that will allow you to define the location of the master modules within the logical interconnect group.
正解：
解説：
Explanation:
Click the drop-down menu next to "Interconnect bay set".
To define the location of the master modules within the logical interconnect group, you need to select the appropriate interconnect bay set. The drop-down menu next to "Interconnect bay set" allows you to specify which bays the interconnect modules will be placed in, thereby determining the location of the master modules.
質問 # 57
Your customer manages an HPE Synergy platform using HPE OneView 5.6. To leverage new functionalities, the customer wants to update HPE OneView to version 61.
Which statement about this update process is true?
- A. The customer can update directly to 6,1, but HPE OneView downtime will be longer.
- B. The customer must check the HPE Composer version, as 61 is supported only with HPE Composer2.
- C. To update to 6,1, the customer has to first update to 6 0, which is a milestone edition.
- D. Before updating to 6,1, customer should increase memory size on the HPE Composer.
正解：C
解説：
When updating HPE OneView to version 6.1, it is necessary to first update to version 6.0, which is a milestone edition. Milestone editions include significant architectural changes and updates that are prerequisites for subsequent versions. This step ensures that the system is properly prepared and compatible with the new features and improvements introduced in version 6.1.
質問 # 58
Put the steps of the HPE infosight flow in the correct order.
正解：
解説：
Explanation:
(observing, learning, predicting, recommending, acting)
* Observing: The first step involves collecting and monitoring data from the infrastructure. HPE InfoSight continuously gathers telemetry data from various components, including storage, compute, and networking devices.
* Learning: In this step, the collected data is analyzed to identify patterns and trends. Machine learning algorithms process the data to understand the normal behavior of the system and detect anomalies.
* Predicting: Based on the learned patterns, HPE InfoSight can predict potential issues before they occur.
This predictive analysis helps in identifying areas that might cause problems in the future.
* Recommending: After predicting potential issues, HPE InfoSight provides actionable recommendations to prevent or resolve these issues. These recommendations are based on best practices and the vast amount of data analyzed by InfoSight.
* Acting: Finally, the recommendations are implemented to optimize the performance and reliability of the infrastructure. This step may involve configuring settings, applying updates, or other actions to maintain the health of the system.
質問 # 59
Your customer plans to deploy VMware ESXi 7.0 U2, and they are looking for a hardware platform that will allow them to use up to 24 TB of physical memory. Which HPE compute system meets the customer's requirements?
- A. HPE ProLiant DL380 Gen 10 Plus
- B. HPE Superdome Flex
- C. HPE ProLiant DL580 Gen 10
- D. HPE Synergy 480 Gen10 Plus
正解：B
質問 # 60
Hotspot Question
Click the option that will allow you to create an OS Deployment Plan with customized kickstart.
正解：
解説：
質問 # 61
Your customer has the following HPE Synergy setup:
- 3 HPE Synergy 12000 Frames
- 4 HPE Virtual Connect SE 100 Gb F32 Modules
- 2 HPE Synergy 50 GO Interconnect Link Modules
- 36 HPE Synergy 480 Gen10 Plus compute modules
- 2 HPE Composer 2 modules
Which statement about this setup is true?
- A. To manage all frames, the customer must buy two additional HPE Composer 2 modules
- B. The customer must buy 36 HPE OneView Advanced licenses to manage compute modules
- C. To use all compute nodes, the customer must create at least two logical enclosures
- D. The customer can add one D3940 storage Module to each of the frames
正解：C
解説：
In an HPE Synergy environment, a logical enclosure represents a management domain that groups multiple Synergy frames and their associated compute, storage, and fabric resources.
Given the setup with 3 HPE Synergy 12000 Frames and the specified components, the customer must create at least two logical enclosures to effectively manage all compute nodes and resources across multiple frames. This ensures proper resource allocation, management, and redundancy.
質問 # 62
Which statement about HPE Superdome Flex 280 is true?
- A. It supports 2 to 8 sockets in 2-socket increments.
- B. It must be equipped with at least 768 GB of memory.
- C. it cannot be managed using HPE OneView.
- D. It can support up to two nPars with an external RMC.
正解：B
質問 # 63
Refer to the exhibit.
Which statement about this logical interconnect group is true?
- A. To use interconnect bay set 3, all compute nodes must be half-height
- B. For the given downlink speed, the maximum number of frames is reached
- C. The master modules are located in the interconnect bays 2 and 5
- D. Both master modules are located in the same HPE S ynergy frame
正解：D
質問 # 64
Which statement about a new HPE SimpliVity deployment is true?
- A. All new HPE SimpliVity models are based on AMD CPUs
- B. New HPE SimpliVity deployments give customer flexible choice of hypervisor
- C. All new HPE SimpliVity models support deduplication and compression
- D. New HPE SimpliVity deployments are licensed per node not per physical socket
正解：B
解説：
All new HPE SimpliVity models are designed with integrated deduplication, compression, and optimization capabilities. These features are fundamental to the HPE SimpliVity architecture, providing enhanced storage efficiency and performance. Deduplication and compression reduce the amount of data stored and transmitted, which improves the overall efficiency of data management in the hyper-converged infrastructure.
質問 # 65
......
HP HPE0-S59試験に合格することで、HPE ASE - Server Solutions Architect V4認定を取得することができ、多くのキャリアチャンスが開かれます。この認定は、雇用主から高く評価され、HPEコンピュートソリューションの設計や実装における熟練度を証明します。キャリアアップを目指すITプロフェッショナルや、熟練した専門家を採用したい企業にとって、HP HPE0-S59試験は目標達成のための貴重なツールです。
試験問題と解答はHPE0-S59学習ガイド問題解答：https://jp.fast2test.com/HPE0-S59-premium-file.html
練習用HPE0-S59にはFast2test顕著な問題集はあなたをHPE Compute Solutions試験合格させます合格させる：https://drive.google.com/open?id=1X-ObWb_RPSEraHvQo27zaafGxP6TC6xH