[2025年03月06日] 最新リアルHPE0-S59試験問題集解答 [Q45-Q70]

[2025年03月06日] 最新リアルHPE0-S59試験問題集解答

あなたを簡単に合格させるHPE0-S59試験問と正確なHPE Compute SolutionsPDF問題

HP HPE0-S59認定を取得することは、雇用主やクライアントに、HPEコンピューターソリューションを設計、実装、管理するための技術的な知識とスキルがあることを示すものです。この認定は、キャリアアップや収入増加の手段となることができます。

質問 # 45
Match each HPE OneView network type with its definition.

正解：

解説：

Explanation:
Here are the correct matches for each HPE OneView network type with their respective definitions:
* Internal networkDefinition:A network that does not utilize any uplink ports and is used for communication between servers in the same frame.
* Tagged networkDefinition:A network in which any tagged packets are dropped and forwarding is done by a MAC address.
* Tunnel networkDefinition:A network with a dedicated set of uplink ports used to pass a group of VLANs without changing the VLAN tags.
* Untagged networkDefinition:A network that contains multiple networks on a single uplink set that allows your customer to share uplinks with those networks.
* Internal network:This network type facilitates communication between servers within the same frame without utilizing uplink ports, providing internal data exchange.
* Tagged network:This network type drops any packets that are tagged and forwards packets based on their MAC address, ensuring only untagged traffic is processed.
* Tunnel network:This type of network uses a specific set of uplink ports to pass VLAN groups while
* preserving the VLAN tags, useful for maintaining VLAN configurations across different network segments.
* Untagged network:This network type enables the sharing of uplinks among multiple networks by placing them on a single uplink set, useful for optimizing network resource usage.

質問 # 46
Which tool can be used to evaluate me health of an HPE Oneview appliance before proceeding with an appliance updated.

A. HPE Composer Maintenance Console
B. HPE OneView Global Dashboard
C. HPE OneView Update Readiness Checker
D. HPE OneView Firmware Compliance Report

正解：A

質問 # 47
You plan to configure a Link Aggregation Group (LAG) for two connections within a server profile for a compute node running an ESXI system.
What is required from the VMware side to enable LAG?

A. Dedicated VMKernel port
B. Load balancing cluster
C. vSphere Standard license
D. Virtual Distributed Switch

正解：A

質問 # 48
Which statement about a new HPE SimpliVity deployment is true?

A. New HPE SimpliVity deployments give customer flexible choice of hypervisor
B. All new HPE SimpliVity models support deduplication and compression
C. All new HPE SimpliVity models are based on AMD CPUs
D. New HPE SimpliVity deployments are licensed per node not per physical socket

正解：A

解説：
All new HPE SimpliVity models are designed with integrated deduplication, compression, and optimization capabilities. These features are fundamental to the HPE SimpliVity architecture, providing enhanced storage efficiency and performance. Deduplication and compression reduce the amount of data stored and transmitted, which improves the overall efficiency of data management in the hyper-converged infrastructure.

質問 # 49
Which compute node parameters are captured within server hardware type?

A. Size of the memory Installed
B. Number of the CPUs
C. installed operating system
D. Mezzanine card configuration

正解：C

質問 # 50
Which statement about HPE Superdome Flex 280 is true?

A. It can support up to two nPars with an external RMC.
B. It supports 2 to 8 sockets in 2-socket increments.
C. It must be equipped with at least 768 GB of memory.
D. it cannot be managed using HPE OneView.

正解：B

質問 # 51
Which statement about the HPE Synergy Image Streamer is true?

A. Image Streamer is used to deploy OS images to the internal disks of compute modules.
B. Image Streamer can manage firmware and driver baselines across multiple frames.
C. Image Streamer can manage OS images, firmware, and drivers across multiple frames.
D. Image Streamer is responsible for the configuration of network settings across Synergy frames.

正解：C

質問 # 52
You configured a vVoI datastore using HPE Storage integration Pack for VMware vCenter.
Which storage object should you check using SSMC to verify whether vVol datastore is configured property?

A. Virtual Volume Set
B. Storage Container
C. App Volume Set
D. virtual Volume

正解：A

質問 # 53
Your customer reports mat an external FC boot volume for Windows server is visible four times in the Disk Management 1 online and 3 offline.
What should you do to resolve this issue?

A. Install and configure MPIO on me Windows system
B. Disable deduplication for this volume at the array level
C. Remove the offline disks using Windows Disk Management
D. Remove the offline disks using array management tools

正解：B

解説：
The issue of seeing multiple instances of an FC boot volume in Disk Management, with one online and three offline, is typically caused by the lack of Multi-Path I/O (MPIO) configuration. Installing and configuring MPIO on the Windows system will enable the operating system to recognize multiple paths to the same storage volume and manage them correctly, presenting only one online instance of the volume.

質問 # 54
Your customer added a new Ethernet network in HPE Oneview mat is used to manage their HPE Synergy platform.
When the customer tries to connect one of the compute nodes to this network through the server profile, this network is not available.
What must be done to fix this issue?

A. Check the Logical Enclosure settings and verify if the maximum number of networks allowed for this LE is reached.
B. To make this network available to use in the server profile, the customer must enable the Smart Link feature within network definition.
C. Check within the server profile which server hardware is used and perform the Refresh operation on this compute node to get the latest adapter information.
D. The newly created network must be added to the uplink set within the LIG, and Logical interconnect configuration must be updated from the LIG.

正解：D

解説：
When a new Ethernet network is created in HPE OneView and is not available in the server profile, it is typically because the network has not been added to the uplink set within the Logical Interconnect Group (LIG). To resolve this issue, the network must be included in the uplink set configuration, and then the logical interconnect configuration must be updated from the LIG to propagate the changes.

質問 # 55
Your customer reports mat an external FC boot volume for Windows server is visible four times in the Disk Management 1 online and 3 offline.
What should you do to resolve this issue?

A. Install and configure MPIO on me Windows system
B. Disable deduplication for this volume at the array level
C. Remove the offline disks using Windows Disk Management
D. Remove the offline disks using array management tools

正解：A

質問 # 56
Your customer with an HPE Synergy environment needs to prevent a timeout and loss of communication during an external switch firmware upgrade.
Which parameter can the customer configure within an uplink set to meet their requirements?

A. The customer should set LACP timer to long.
B. The customer should enable LACP load-balancing.
C. The customer should disable LACP failover trigger.
D. The customer should set the connection mode to manual.

正解：A

質問 # 57
Your customer plans to deploy HPE OneView for VMware vCenter Server together with HPE Storage Integration Pack for VMware vCenter. The customer wants to use them to manage HPE Synergy Gen10 compute modules. HPE ProLiant Gen 10 servers and an MSA array.
Which statement about compatibility of the existing environment with the planned software components is true?

A. HPE Storage integration Pack for VMware vCenter does not support MSA arrays
B. To use the required plugins HPE ProLiant Gen10 systems must be managed using HPE OneView
C. HPE OneView for VMware vCenter Server does not support standalone HPE ProLiant servers
D. Both HPE Synergy Gen10 full-height compute module plugins will require a license

正解：C

質問 # 58
Your customer is implementing an HPE Synergy solution based on three frames.
Click each of the ports that can be used to connect satellite modules.

正解：

解説：

Explanation:
The QSFP+ ports (Q1 and Q2) on the HPE Virtual Connect SE 100Gb F32 Module for HPE Synergy can be used to connect satellite modules. These ports are designed to handle high-speed connectivity required for linking additional frames and expanding the Synergy infrastructure.

質問 # 59
What is a restriction of using a RoCE network?

A. This network type is not supported with HPE Virtual Connect SE 100Gb F8 Module for HPE Synergy.
B. This network type by default is configured as untagged network and cannot be a part of a network set.
C. This network type does not support the smart link and private network features.
D. This network type does not support sFlow and remote port monitoring.

正解：C

質問 # 60
What is a restriction of using a RoCE network?

A. It does not support smart link and private network features.
B. It does not support Private VLAN and Multicast VLAN.
C. It is by default configured as an untagged network and cannot be a part of a network set.
D. it is not supported with HPE Virtual Connect SE 40 GD F8 Module for HPE Synergy.

正解：A

解説：
A restriction of using a RoCE (RDMA over Converged Ethernet) network is that it does not support smart link and private network features. These features are essential for certain network configurations and use cases, but they are not available in RoCE networks, which are designed for high-performance, low-latency communication.

質問 # 61
Your customer plans to expand an existing nPar based on a single HPE Superdome Flex chassis. Which statement about workload availability during expansion is true?

A. Online expansion is available only if RMC is used for management.
B. HPE Superdome Flex does not support expansion of powered on nPars
C. Powered nPar can be expanded if it does not use HPE Persistent Memory
D. Powered nPar can be expanded only if HPE Superdome Flex 280 is used

正解：C

解説：
HPE Superdome Flex allows for the expansion of powered-on nPars (nPartitions), but this capability is subject to certain conditions. One of these conditions is that the nPar does not use HPE Persistent Memory. Expanding an nPar with Persistent Memory typically requires a shutdown to reconfigure the memory settings safely.

質問 # 62
Your customer has a logical enclosure configured using a angle HPE Synergy frame with the following configuration
- two HPE Virtual Connect SE 100Gb F32 Modules for Synergy
- two HPE Synergy Virtual Connect SE 32Gb FC Modules -12 HPE Synergy 480 Gen10 Plus compute nodes with appropriate mezzanine cards They plan to add a new HPE Synergy frame to an existing logical enclosure with the following configuration
- two HPE Synergy Virtual Connect SE 32Gb FC Modules
- two HPE Synergy 20Gb interconnect Link Modules
- Eight HPE Synergy 480 Gen 10 Plus compute nodes with appropriate mezzanine cards Which statement about the planned configuration change is true?

A. A license for an extended logical enclosure must be added to HPE OneView through GUI
B. The two HPE Synergy 20Gb interconnect Link Modules must be replace with the 50Gb option
C. Four compute modules must be moved to the second frame to balance the configuration
D. The HPE Synergy virtual Connect SE 32Gb FC Modules from both frames should be stacked

正解：D

解説：
When adding a new HPE Synergy frame to an existing logical enclosure, it is essential to stack the HPE Synergy Virtual Connect SE 32Gb FC Modules from both frames. Stacking these modules ensures consistent management and redundancy across the logical enclosure, providing seamless integration and optimal performance.

質問 # 63
What is one of me benefits of using HPE Composer 2?

A. A pair of HPE Composer 2 modules can manage 42 frames, compared to 21 frames managed by HPE Composer
B. The administrator can access an HPE Synergy Composer 2 appliance remotely to perform First Time Setup
C. HPE Composer 2 has 128GB of memory and 4 AMD CPUs to improve performance of me management system
D. HPE Composer 2 modules are required to manage HPE virtual Connect SE 100GD F32 Modules for Synergy

正解：C

質問 # 64
Your customer plans to setup an HPE Synergy solution based on SY480 Gen10 compute nodes with the following connectivity options - SAS connectivity installed in the first fabric - FC connectivity Installed In the second fabric - Ethernet connectivity installed in the third fabric.
Which statement regarding this setup is true?

A. Each compute node must have at least 768GB of memory installed
B. Each interconnect module in each fabric must be properly licensed in HPE OneView
C. Interconnect modules that provide SAS connectivity should be moved to the third fabric
D. Compute nodes must have a second CPU installed to access the second fabric.

正解：A

質問 # 65
Your customer plans to use HPE OneView for VMware vCenter Server to deploy ESXi systems. They created a server profile template that they want to use in HPE OneView.
Put the steps required to configure HPE OneView for VMware vCenter Server on the left into their correct order on the right.

正解：

解説：

Explanation:
To configure HPE OneView for VMware vCenter Server to deploy ESXi systems, follow these steps in the correct order:
* Add HPE OneView credentials to the vCenter Server and create OS Deployment Plan.
* Add vCenter Server to HPE OneView for VMware vCenter Server.
* Upload HPE-friendly ESXi image.
* Deploy new ESXi systems using vCenter Server interface.
* Add HPE OneView credentials to the vCenter Server and create OS Deployment Plan: Integrate HPE OneView with vCenter Server by adding the necessary credentials and setting up the OS Deployment Plan.
* Add vCenter Server to HPE OneView for VMware vCenter Server: Ensure that vCenter Server is added to HPE OneView for VMware vCenter Server to enable communication and management.
* Upload HPE-friendly ESXi image: Upload an ESXi image that is optimized for HPE hardware to the vCenter Server for use in the deployment process.
* Deploy new ESXi systems using vCenter Server interface: Use the vCenter Server interface to deploy new ESXi systems based on the created server profile template and the uploaded ESXi image.
These steps ensure a seamless deployment and management of ESXi systems using HPE OneView integrated with VMware vCenter Server.

質問 # 66
Your customer is trying to grow a VMware duster using HPE OneView for VMware vCenter Server. They get an error and cannot proceed Which tool should you use to troubleshoot the problem?

A. HPE OneView interface to import an existing cluster using the hypervisor cluster profile functionality.
B. vCenter Server to verify if an OS Bund Plans property defined and has ESXi image uploaded
C. ILO interlace of a given HPE Synergy compute node to verify whether this node is registered within HPE Oneview.
D. HPE One View for VMware vCenter Server to verify if server profile template s property imported and registered

正解：D

解説：
When encountering an error while growing a VMware cluster using HPE OneView for VMware vCenter Server, it is crucial to verify that the server profile template is properly imported and registered in HPE OneView. This ensures that the necessary configurations and settings are correctly applied to the new compute nodes being added to the cluster.

質問 # 67
Your customer plans to deploy ESXi systems to HPE Synergy and HPE ProLiant servers using HPE OneView for VMware vCenter Server.
Which statement about HPE OneView for VMware vCenter Server functionality is true for this environment?

A. Individual systems can be added to HPE OneView for VMware vCenter Server through an ILO management processor
B. HPE ProLiant servers need an HPE OneView for VMware vCenter Server license for full functionality
C. HPE Synergy requires HPE Composer 2 for full functionality of HPE OneView for VMware vCenter Server
D. Only systems managed using HPE Oneview can use HPE Oneview for VMware vCenter Server functionalities

正解：A

解説：
HPE OneView for VMware vCenter Server provides integrated management and monitoring capabilities for systems managed by HPE OneView. This means that to leverage the full functionality of HPE OneView for VMware vCenter Server, the systems (both HPE Synergy and HPE ProLiant servers) must be managed through HPE OneView. This integration allows for comprehensive infrastructure management directly from the VMware vCenter interface.

質問 # 68
Your customer plans to deploy a VMware ESXi with HPE Synergy platform. They plan to use Distributed Switches and DRS cluster You are preparing a proposal with the following components:
- HPE Synergy frame with ten HPE Synergy 480 Gen10 Plus compute modules
- two HPE Virtual Connect SE 100Gb F32 Modules for Synergy
- an appropriate number of the vSphere Standard licenses for each compute node
- one HPE D3940 Storage Modules with 40 SSDs - all required cables and options Which statement about this proposal is true?

A. One HPE Virtual Connect SE 100Gb F32 Module for Synergy should be replaced with 50GD/S ILM
B. vSphere Standard licenses should be replaced with Enterprise Pius licenses to enable requested features
C. 20 SSD drives should be removed from this setup, as D3940 supports only 20 SSD or SAS drive.
D. 2 additional HPE Synergy 480 Gen10 Plus compute modules can be added to this setup

正解：B

解説：
The VMware vSphere Standard license does not include support for advanced features like Distributed Resource Scheduler (DRS) and Distributed Switches. These features are available onlywith the vSphere Enterprise Plus license. Therefore, to meet the customer's requirement of using Distributed Switches and a DRS cluster, the proposal should include vSphere Enterprise Plus licenses instead of Standard licenses.

質問 # 69
Match HPE SimpliVity team with the definition.

正解：

解説：

Explanation:
Here are the correct matches for each HPE SimpliVity term with their respective definitions:
* ArbiterDefinition:Facilitates communication between nodes and resolves state conflicts to ensure service continuity.
* Compute nodeDefinition:Non-hyperconverged servers that can exist in an HPE SimpliVity environment and provide additional compute capacity while consuming the storage provided by the hyperconverged nodes.
* Intelligent Workload OptimizerDefinition:Integrates with VMware Distributed Resources Scheduler to ensure optimal placement of the VM compute resources.
* Management Virtual ControllerDefinition:Provides centralized management and events end-point for vCenter.
* Arbiter:The Arbiter in an HPE SimpliVity environment is responsible for ensuring communication between nodes and resolving any state conflicts, which is crucial for maintaining service continuity.
* Compute node:In an HPE SimpliVity environment, a compute node refers to non-hyperconverged servers that provide additional compute capacity while utilizing the storage from hyperconverged nodes.
* Intelligent Workload Optimizer:This component integrates with VMware's Distributed Resources Scheduler (DRS) to optimize the placement of virtual machine (VM) compute resources, ensuring they
* are efficiently distributed across the environment.
* Management Virtual Controller:This controller provides centralized management and serves as the events end-point for vCenter, allowing for streamlined management and monitoring of the SimpliVity environment.