100%更新されたのはHP HPE0-S59限定版PDF問題集
有効な試験問題を試そうHPE0-S59には無料サイトで限定お試しチャンス
質問 # 43
Your customer has me following HPE Synergy setup
- Three frames fully populated with HPE Synergy 480 Gen10 Plus modules and 25Gb/s downlink speed formulating a single logical enclosure
- Two HPE Virtual Connect SE 100Gb F32 Module for Synergy
- Four HPE Synergy 50Gb interconnect Link Module
- Six HPE Synergy Virtual Connect SE 32Gb FC Modules
The customer needs to add a frame.
Which statement about the expansion of this setup is true?
- A. The customer can grow the existing logical enclosure up to 5 frames
- B. The additional frame must have HPE Virtual Connect FC modules installed
- C. The customer has to create a new logical enclosure for the additional frame
- D. The additional frame cannot have 12Gb SAS connection modules installed
正解：A
解説：
HPE Synergy allows scaling of logical enclosures up to 5 frames. Given the current setup of three frames fully populated with HPE Synergy 480 Gen10 Plus modules and other specified components, the customer can add another frame to the existing logical enclosure. This flexibility in scaling ensures that the logical enclosure can be expanded without the need to create a new logical enclosure, provided that the necessary interconnect modules are in place.
質問 # 44
Refer to the exhibit.
Which statement about this logical interconnect group is true?
- A. For the given downlink speed, the maximum number of frames is reached
- B. The master modules are located in the interconnect bays 2 and 5
- C. Both master modules are located in the same HPE Synergy frame
- D. To use interconnect bay set 3, all compute nodes must be half-height
正解：D
解説：
In HPE Synergy configurations, when using interconnect bay set 3, it implies that the compute nodes should be half-height. This is because bay set 3 is typically utilized in configurationswhere half-height compute nodes are used to ensure proper alignment and connectivity within the Synergy frame.
質問 # 45
You configured a vVoI datastore using HPE Storage integration Pack for VMware vCenter.
Which storage object should you check using SSMC to verify whether vVol datastore is configured property?
- A. virtual Volume
- B. Virtual Volume Set
- C. App Volume Set
- D. Storage Container
正解：B
質問 # 46
You modified a logical interconnect group mat is used to configure logical interconnects in five different logical enclosures. What will be the impact of that change?
- A. All physical interconnects from affected logical interconnects will be placed in a maintenance mode
- B. All physical interconnects from the affected logical interconnects must he rebooted to activate the new configuration
- C. All logical interconnects configured using this logical interconnect group will be automatically updated
- D. All logical interconnects configured using this logical Interconnect group will report inconsistency
正解：A
質問 # 47
Which statement about the HPE D3940 storage module is true?
- A. SATA drives requires redundant 10 adapters to be installed in this module
- B. Only one type of drives (SATA, SAS, SSD) can be installed in each module
- C. it is configured through CLl available from HPE Synergy console
- D. Up to five modules can be installed in a single frame with Gen10 servers
正解：D
解説：
The HPE D3940 storage module is designed to provide flexible and scalable storage within the HPE Synergy platform. Up to five D3940 storage modules can be installed in a single HPE Synergy frame when used with Gen10 servers. This configuration allows for high-density storage solutions within a single frame, making it ideal for environments that require substantial storage capacity.
質問 # 48
Your customer plans to deploy HPE Superdome Flex and configure two nPars, each based on two chassis Which components must be included in the proposal to meet the customer's needs?
- A. Rack Management Controller for nPar management
- B. One base chassis and three expansion chassis with licenses
- C. HPE Superdome Flex Grid licenses enabling connectivity between chassis
- D. At least Tour HPE Persistent Memory DIMMs per nPar
正解：C
解説：
To deploy HPE Superdome Flex and configure two nPars, each based on two chassis, you must include the HPE Superdome Flex Grid licenses. These licenses enable connectivity between the chassis, allowing the creation of nPars (nPartitions) that span multiple chassis. This is essential for the system's proper configuration and operation in a multi-chassis nPar setup.
質問 # 49
Which statement about HPE Superdome nPars is true?
- A. nPars are supported only with 3rd Generation Intel Xeon Scalable Processors
- B. Chassis in the same nPar can have different memory configuration
- C. Chassis in the same nPar can have different CPU configuration
- D. Rack Management Controller is required Tor nPar configuration
正解：D
解説：
The Rack Management Controller (RMC) is a critical component for configuring nPartitions (nPars) in HPE Superdome systems. The RMC provides the necessary control and management interfaces to define and manage nPars, ensuring proper allocation of resources and isolation of workloads.
質問 # 50
Which statement about manual orchestration during the firmware update is true?
- A. It allows all the interconnect modules to be activated manually at the same time.
- B. It provides the ability to install an older firmware version than currently Installed In the interconnect
- C. It is supported only for logical enclosures with at least three frames
- D. It provides an ability to select and update one side of the Interconnect topology at a time
正解：D
解説：
Manual orchestration during a firmware update allows administrators to control the update process more precisely. Specifically, it enables the selection and update of one side of the interconnect topology at a time.
This capability is particularly useful in maintaining network availabilityand minimizing downtime during the update process, as one side can be updated and verified before proceeding to the other side.
質問 # 51
Your customer plans to deploy a VMware ESXi with HPE Synergy platform. They plan to use Distributed Switches and DRS cluster You are preparing a proposal with the following components:
- HPE Synergy frame with ten HPE Synergy 480 Gen10 Plus compute modules
- two HPE Virtual Connect SE 100Gb F32 Modules for Synergy
- an appropriate number of the vSphere Standard licenses for each compute node
- one HPE D3940 Storage Modules with 40 SSDs - all required cables and options Which statement about this proposal is true?
- A. 20 SSD drives should be removed from this setup, as D3940 supports only 20 SSD or SAS drive.
- B. One HPE Virtual Connect SE 100Gb F32 Module for Synergy should be replaced with 50GD/S ILM
- C. 2 additional HPE Synergy 480 Gen10 Plus compute modules can be added to this setup
- D. vSphere Standard licenses should be replaced with Enterprise Pius licenses to enable requested features
正解：D
質問 # 52
Your customer plans to deploy VMware ESXi 7. 0 U2, and they are looking for a hardware platform that will allow them to use up to 16 CPU sockets Which HPE compute system meets the customer requirements?
- A. HPE Superdome Flex system
- B. HPE ProLiant DL580 Gen10
- C. HPE Synergy 480 Gen10 Plus
- D. HPE ProLiant OL380 Gen 10 Plus
正解：A
解説：
The HPE Superdome Flex system is the only HPE compute system that supports up to 16 CPU sockets, making it suitable for customers who require a hardware platform with such high scalability. The Superdome Flex is designed for mission-critical workloads and provides exceptional scalability and performance.
質問 # 53
Click the drop-down menu that will allow you to define the location of the master modules within the logical interconnect group.
正解：
解説：
Explanation:
Click the drop-down menu next to"Interconnect bay set".
To define the location of the master modules within the logical interconnect group, you need to select the appropriate interconnect bay set. The drop-down menu next to "Interconnect bay set" allows you to specify which bays the interconnect modules will be placed in, thereby determining the location of the master modules.
質問 # 54
Match HPE SimpliVity term with the definition.
正解：
解説：
Explanation:
Here are the correct matches for each HPE SimpliVity term with their respective definitions:
* ArbiterDefinition:Facilitates communication between nodes and resolves state conflicts to ensure service continuity.
* Compute nodeDefinition:Non-hyperconverged servers that can exist in an HPE SimpliVity environment and provide additional compute capacity while consuming the storage provided by the hyperconverged nodes.
* Management Virtual ControllerDefinition:Provides centralized management and events end-point for vCenter.
* Intelligent Workload OptimizerDefinition:Integrates with VMware Distributed Resources Scheduler to ensure optimal placement of the VM compute resources.
* Arbiter:This component is essential for ensuring that the HPE SimpliVity nodes communicate properly and that any state conflicts are resolved, which is critical for maintaining service continuity.
* Compute node:These are non-hyperconverged servers that add additional compute capacity to the HPE SimpliVity environment. They utilize the storage resources provided by the hyperconverged nodes.
* Management Virtual Controller:This controller is responsible for centralized management and acts as the events end-point for vCenter, allowing for streamlined management of the SimpliVity environment.
* Intelligent Workload Optimizer:This tool integrates with VMware's Distributed Resources Scheduler (DRS) to ensure that virtual machine (VM) compute resources are placed optimally across the infrastructure.
質問 # 55
Which statement about an HPE Oneview support dump is true?
- A. Support dump can be created if HPE Virtual Connect modules are installed in the frame
- B. Support dump is a binary file that can be opened only in a dedicated application
- C. Preview support dump is available only when creating an appliance support dump
- D. Appliance support dump by default contains a logical enclosure support dump
正解：B
質問 # 56
What is a restriction of using a RoCE network?
- A. It is by default configured as an untagged network and cannot be a part of a network set.
- B. it is not supported with HPE Virtual Connect SE 40 GD F8 Module for HPE Synergy.
- C. It does not support Private VLAN and Multicast VLAN.
- D. It does not support smart link and private network features.
正解：D
解説：
A restriction of using a RoCE (RDMA over Converged Ethernet) network is that it does not support smart link and private network features. These features are essential for certain network configurations and use cases, but they are not available in RoCE networks, which are designed for high-performance, low-latency communication.
質問 # 57
Which statement about a new HPE SimpliVity deployment is true?
- A. AM new HPE SimpliVity models are software optimized
- B. A new HPE SimpliVity node can be a member of multiple dusters
- C. All new HPE SimpliVity models are based on mid CPUs
- D. New HPE SimpliVity deployments gives customer flexible choice of hypervisor
正解：D
解説：
New HPE SimpliVity deployments offer customers the flexibility to choose between different hypervisors, such as VMware vSphere and Microsoft Hyper-V. This flexibility allows customers to select the hypervisor that best fits their existing infrastructure and operational preferences.
質問 # 58
Which HPE Virtual Connect feature allows an administrator to suppress excessive inbound multicast broadcast and destination lookup failure (OLF) packets?
- A. Storm control
- B. Loop protection
- C. Pause flood protection
- D. LLDP tagging
正解：A
質問 # 59
Your customer added a new Ethernet network in HPE Oneview mat is used to manage their HPE Synergy platform.
When the customer tries to connect one of the compute nodes to this network through the server profile, this network is not available.
What must be done to fix this issue?
- A. Check the Logical Enclosure settings and verify if the maximum number of networks allowed for this LE is reached.
- B. Check within the server profile which server hardware is used and perform the Refresh operation on this compute node to get the latest adapter information.
- C. The newly created network must be added to the uplink set within the LIG, and Logical interconnect configuration must be updated from the LIG.
- D. To make this network available to use in the server profile, the customer must enable the Smart Link feature within network definition.
正解：C
解説：
When a new Ethernet network is created in HPE OneView and is not available in the server profile, it is typically because the network has not been added to the uplink set within the Logical Interconnect Group (LIG). To resolve this issue, the network must be included in the uplink set configuration, and then the logical interconnect configuration must be updated from the LIG to propagate the changes.
質問 # 60
Your customer is implementing an HPE Synergy solution based on three frames.
Click each of the ports that can be used to connect satellite modules.
正解：
解説：
Explanation:
The QSFP+ ports (Q1 and Q2) on the HPE Virtual Connect SE 100Gb F32 Module for HPE Synergy can be used to connect satellite modules. These ports are designed to handle high-speed connectivity required for linking additional frames and expanding the Synergy infrastructure.
質問 # 61
......
HP HPE0-S59試験は、ITプロフェッショナルがHPEコンピュートソリューションにおけるスキルと知識を証明するための素晴らしい方法です。この試験に合格することにより、個人はグローバルに認められ、高く評価されるHPE ATP - Server Solutions V4認定資格を獲得することができます。この試験は広範囲なトピックをカバーしており、HPE ATP - Server Solutions V4トレーニングコースに登録して準備することができます。全体的に、この認定資格はITプロフェッショナルのキャリアの推進と、雇用主にHPEコンピュートソリューションに熟練した労働力を提供することができます。
HP HPE0-S59公式認定ガイドPDF：https://jp.fast2test.com/HPE0-S59-premium-file.html
無料HPE Technical HPE0-S59公式認定ガイドPDFダウンロード：https://drive.google.com/open?id=1UPYLmBRNmbGVXbRRgzOPoN3fmKw5ydQe