リアルHP HPE0-S59試験問題集には正解106問題と解答があります [Q17-Q40]

リアルHP HPE0-S59試験問題集には正解106問題と解答があります

有効なHPE0-S59テスト解答とHP HPE0-S59試験PDF問題を試そう

質問 # 17
Your customer wants to compare HPE Superdome Flex with HPE Superdome Flex 280.
Which statement about these two systems is true?

A. Only HPE Superdome Rex 280 can be managed using HPE OneView
B. Only HPE Superdome Flex 280 can support multiple nPars
C. Only HPE Superdome Flex supports 32 sockets and 48TB of memory
D. Only HPE Superdome Flex supports HPE Persistent Memory

正解：A

質問 # 18
Your customer has an HPE Synergy frame equipped with a D3940 Storage Module. Each of the compute nodes has an appropriate storage controller Installed and two 12Gb SAS switches installed in the first fabric.
The customer reports that compute nodes cannot access the storage module. What should you verify first when troubleshooting this problem?

A. If there Is a logical interconnect created based on the 12Gb SAS switches.
B. If the D3940 module is imported in managed state that allows volume provisioning.
C. If the D3940 storage module is property licensed through HPE OneView interface.
D. If there is at least one ISCSI network configured that will provide access to the module.

正解：B

質問 # 19
Refer to the exhibit.

Which statement about this logical interconnect group is true?

A. For an uplink set, ports from different modules can be selected
B. An additional license is required to change the enclosure count
C. Both modules are located in different frames for redundancy
D. interconnect modules are installed in interconnect bays 1 and 4

正解：B

質問 # 20
Which statement about HPE Apollo 2000 Gen10 Plus platform is true?

A. It is equipped with HPE Persistent memory by default
B. It is fully managed using HPE OneView including all connections
C. It offers servers with AMD EPYC and Intel Xeon Scalable CPUs
D. It can support a single processor only and up to 4 per chassis

正解：C

解説：
The HPE Apollo 2000 Gen10 Plus platform offers flexibility in processor options, supporting both AMD EPYC and Intel Xeon Scalable CPUs. This allows customers to choose the best processor architecture based on their specific workload requirements and performance needs.

質問 # 21
Your customer plans to deploy HPE Superdome Flex and configure two nPars, each based on two chassis Which components must be included in the proposal to meet the customer's needs?

A. HPE Superdome Flex Grid licenses enabling connectivity between chassis
B. At least Tour HPE Persistent Memory DIMMs per nPar
C. One base chassis and three expansion chassis with licenses
D. Rack Management Controller for nPar management

正解：C

質問 # 22
An HPE Synergy customer needs to prevent a timeout and loss of communication during an external switch firmware upgrade.
Click the parameter that the customer should configure within an uplink set to meet this requirement

正解：

解説：

質問 # 23
Your customer plans to use HPE OneView for VMware vCenter Server to deploy ESXi systems. They created a server profile template that they want to use in HPE OneView.
Put the steps required to configure HPE OneView for VMware vCenter Server on the left into their correct order on the right.

正解：

解説：

Explanation:
To configure HPE OneView for VMware vCenter Server to deploy ESXi systems, follow these steps in the correct order:
* Add HPE OneView credentials to the vCenter Server and create OS Deployment Plan.
* Add vCenter Server to HPE OneView for VMware vCenter Server.
* Upload HPE-friendly ESXi image.
* Deploy new ESXi systems using vCenter Server interface.
* Add HPE OneView credentials to the vCenter Server and create OS Deployment Plan: Integrate HPE OneView with vCenter Server by adding the necessary credentials and setting up the OS Deployment Plan.
* Add vCenter Server to HPE OneView for VMware vCenter Server: Ensure that vCenter Server is added to HPE OneView for VMware vCenter Server to enable communication and management.
* Upload HPE-friendly ESXi image: Upload an ESXi image that is optimized for HPE hardware to the vCenter Server for use in the deployment process.
* Deploy new ESXi systems using vCenter Server interface: Use the vCenter Server interface to deploy new ESXi systems based on the created server profile template and the uploaded ESXi image.
These steps ensure a seamless deployment and management of ESXi systems using HPE OneView integrated with VMware vCenter Server.

質問 # 24
Refer to the exhibit.

Which statement about this logical interconnect group is true?

A. The master modules are located in the interconnect bays 2 and 5
B. Both master modules are located in the same HPE Synergy frame
C. For the given downlink speed, the maximum number of frames is reached
D. To use interconnect bay set 3, all compute nodes must be half-height

正解：D

解説：
In HPE Synergy configurations, when using interconnect bay set 3, it implies that the compute nodes should be half-height. This is because bay set 3 is typically utilized in configurationswhere half-height compute nodes are used to ensure proper alignment and connectivity within the Synergy frame.

質問 # 25
Match each HPE OneView network type with its definition.

正解：

解説：

質問 # 26
Refer to the exhibit.

Which statement about this logical interconnect group is true?

A. interconnect modules are installed in interconnect bays 1 and 4
B. For an uplink set, ports from different modules can be selected
C. Both modules are located in different frames for redundancy
D. An additional license is required to change the enclosure count

正解：A

解説：
In the HPE Synergy setup shown in the exhibit, the interconnect type is Virtual Connect SE 32Gb FC Module for Synergy with an enclosure count of 1 and interconnect bay set 1. Typically, in such configurations, the interconnect modules are installed in bays 1 and 4 for redundancy. This placement ensures high availability and failover capabilities.

質問 # 27
Your customer plans to deploy VMware ESXi 7. 0 U2, and they are looking for a hardware platform that will allow them to use up to 16 CPU sockets Which HPE compute system meets the customer requirements?

A. HPE Superdome Flex system
B. HPE ProLiant DL580 Gen10
C. HPE Synergy 480 Gen10 Plus
D. HPE ProLiant OL380 Gen 10 Plus

正解：A

解説：
The HPE Superdome Flex system is the only HPE compute system that supports up to 16 CPU sockets, making it suitable for customers who require a hardware platform with such high scalability. The Superdome Flex is designed for mission-critical workloads and provides exceptional scalability and performance.

質問 # 28
Click the option that will allow you to create an OS Deployment Plan with customized kickstart.

正解：

解説：

質問 # 29
Match each HPE Synergy logical component with the definition.

正解：

解説：

Explanation:
Here are the correct matches for each HPE Synergy logical component with their respective definitions:
* Enclosure groupDefinition:Contains the configuration intended for a set of physical enclosures.
* Logical enclosureDefinition:A logical resource that defines a consistent configuration for an enclosure or a set of enclosures making up a logical enclosure.
* Logical interconnectDefinition:A single administrative entity that consists of the configuration for a set of interconnects in a single enclosure or a frame link topology.
* Logical interconnect groupDefinition:Acts as a recipe for creating a group that represents the available networks, uplink sets, and interconnect settings for a set of physical interconnects in a set of enclosures.
* Enclosure group:An enclosure group in HPE Synergy defines the configuration settings, including logical interconnect groups and firmware baselines, for a set of physical enclosures.
* Logical enclosure:A logical enclosure in HPE Synergy is a resource that includes one or more physical enclosures and their associated logical interconnects, providing a consistent configuration for those enclosures.
* Logical interconnect:A logical interconnect represents a set of interconnects within an enclosure, managed as a single entity. It includes the configuration of the interconnects and their connections.
* Logical interconnect group:A logical interconnect group (LIG) defines the network configuration, including available networks, uplink sets, and interconnect settings, that can be applied to multiple enclosures.

質問 # 30
Which statement about login redistribution is true?

A. Login redistribution is a licensed feature and the number of licenses required depends on the number of active ports
B. Login redistribution is supported only on the HPE Synergy Virtual Connect SE 32Gb FC Modules
C. Login redistribution is available only If HPE Primera or HPE Alletra is connected directly to the HPE Synergy frame
D. Login redistribution is used for login balancing when they are not distributed evenly over the FC links

正解：B

質問 # 31
Your customer wants to add dedicated Fibre Channel connectivity to the HPE Synergy frame running HPE Synergy 480 Gen10 compute modules, each with one CPU socket populated Currently they use two 12 Gb SAS switches and two HPE Virtual Connect SE 100Gb F32 Modules for HPE Synergy installed in third fabric.
What must be done to enable dedicated FC connectivity for this HPE Synergy frame?

A. SAS switches must be moved to second fabric and FC modules Installed in the first one.
B. A second CPU must be installed for all HPE Synergy 480 Gen10 compute nodes.
C. For VC-FC modules, all of server facing ports must be property licensed.
D. For Brocade switches, a logical interconnect group must be created in HPE OneView.

正解：A

質問 # 32
Which statement about a new HPE SimpliVity deployment is true?

A. All new HPE SimpliVity models are based on AMD CPUs
B. All new HPE SimpliVity models support deduplication and compression
C. New HPE SimpliVity deployments give customer flexible choice of hypervisor
D. New HPE SimpliVity deployments are licensed per node not per physical socket

正解：B

解説：
All new HPE SimpliVity models are designed with integrated deduplication, compression, and optimization capabilities. These features are fundamental to the HPE SimpliVity architecture, providing enhanced storage efficiency and performance. Deduplication and compression reduce the amount of data stored and transmitted, which improves the overall efficiency of data management in the hyper-converged infrastructure.

質問 # 33
Put the steps of the HPE infosight flow in the correct order.

正解：

解説：

Explanation:
(observing, learning, predicting, recommending, acting)
* Observing:The first step involves collecting and monitoring data from the infrastructure. HPE InfoSight continuously gathers telemetry data from various components, including storage, compute, and networking devices.
* Learning:In this step, the collected data is analyzed to identify patterns and trends. Machine learning
* algorithms process the data to understand the normal behavior of the system and detect anomalies.
* Predicting:Based on the learned patterns, HPE InfoSight can predict potential issues before they occur.
This predictive analysis helps in identifying areas that might cause problems in the future.
* Recommending:After predicting potential issues, HPE InfoSight provides actionable recommendations to prevent or resolve these issues. These recommendations are based on best practices and the vast amount of data analyzed by InfoSight.
* Acting:Finally, the recommendations are implemented to optimize the performance and reliability of the infrastructure. This step may involve configuring settings, applying updates, or other actions to maintain the health of the system.

質問 # 34
Your customer reports that they cannot deploy HPE Synergy compute nodes using HPE OneView for VMware vCenter Server (HPE OV4VC).
What should you check during troubleshooting process?

A. If vCenter Server is licensed in the HPE Oneview interface
B. If an compute nodes are added to the vCenter Server
C. If HPE OneView credentials are added in vCenter Server
D. If the HPE Oneview instance Is integrated with HPE OV4VC.

正解：C

解説：
When troubleshooting the deployment of HPE Synergy compute nodes using HPE OneView for VMware vCenter Server (HPE OV4VC), it's essential to verify that HPE OneView credentials are correctly added in the vCenter Server. Proper integration and authentication are necessary for HPE OV4VC to communicate and manage the compute nodes effectively.

質問 # 35
A logical interconnect group can span on multiple HPE Synergy frames for which interconnect type?

A. Brocade 32GB Fibre Channel Switch Module for HPE Synergy
B. HPE Synergy 12 Gb SAS Connection Module
C. HPE virtual Connect SE 32 Gb FC Module for Synergy
D. HPE Virtual Connect SE 100 Gb F32 Module tor Synergy

正解：D

解説：
A logical interconnect group in HPE Synergy is used to define a consistent network configuration across multiple frames. The HPE Virtual Connect SE 100 Gb F32 Module for Synergy allows for logical interconnect groups to span across multiple frames. This is because the 100 Gb module supports high-speed connectivity and the necessary infrastructure to maintain consistent network configurations over multiple frames, which is essential for scalable and flexible Synergy environments.

質問 # 36
Which statement about an HPE Oneview support dump is true?

A. Preview support dump is available only when creating an appliance support dump
B. Appliance support dump by default contains a logical enclosure support dump
C. Support dump is a binary file that can be opened only in a dedicated application
D. Support dump can be created if HPE Virtual Connect modules are installed in the frame

正解：B

解説：
An HPE OneView support dump includes various diagnostic information, and by default, it contains a logical enclosure support dump. This comprehensive dump helps in troubleshooting by providing detailed logs and configuration data from the appliance and the logical enclosures it manages, enabling effective diagnosis of issues within the managed environment.

質問 # 37
What is a limitation when creating a server profile?

A. It is not possible to create shared volumes on demand through a server profile
B. BIOS settings can be changed only when UEFI optimized is selected as boot mode
C. ILO management is limited to the integration with Active Directory or LDAP
D. Administrator cannot define more than 8 connections within a server profile

正解：A

解説：
A limitation when creating a server profile in HPE OneView is that it is not possible to create shared volumes on demand directly through a server profile. Server profiles in HPE OneView are used to define and manage the configuration of compute nodes, including network connections, BIOS settings, and boot order, but they do not have the capability to dynamically create or manage shared storage volumes.

質問 # 38
After HPE Superdome Flex deployment and nPar setup, you need to verify health status of HPE Superdome Flex components.
Put the steps on the left into the coned order on the right to perform this task.

正解：

解説：

* Open SSH client: Begin by opening an SSH client on your computer. This client will be used to establish a secure connection to the Rack Management Controller (RMC).
* Open session to RMC: Use the SSH client to open a session to the RMC. The RMC is the central management component for the HPE Superdome Flex system.
* Enter show health command: Once connected to the RMC, enter the show health command. This command will provide detailed information about the health status of various components within the Superdome Flex system.
* Confirm health status: Review the output of the show health command to confirm the health status of the Superdome Flex components. This step ensures that all components are functioning correctly and identifies any potential issues.