[2024年01月最新リリース]NS0-593試験問題はあなたをパスさせる
Network Appliance NS0-593試験基本問題とアンサー
NS0-593認定は、NetApp ONTAPテクノロジーの専門知識を実証したいIT専門家にとって重要な資格です。この認定はグローバルに認識されており、個人がNetApp ONTAPベースのストレージシステムで作業するために必要なスキルと知識を持っていることを示しています。この認定は、IT専門家がキャリアを進め、収益の可能性を高めるためのITプロフェッショナルが経路を提供します。
Network Appliance NS0-593試験は、NetAppストレージシステムの管理とサポートにおける知識と技術を向上させたい専門家にとって必須の認証です。この認定試験では、ONTAPソフトウェアを使用してNetAppストレージシステムを構成、トラブルシューティング、最適化する知識と技術を試験します。認証は2年間有効で、専門家には組織内でNetAppストレージシステムを管理およびサポートするために必要なスキルと知識が提供されます。
NS0-593認定試験では、NetApp ONTAPソフトウェアのインストールと構成、ストレージシステムの管理、トラブルシューティング、最適化など、幅広いトピックをカバーしています。この試験は、これらの分野で個人の知識とスキルをテストするように設計されており、複数の選択の質問で構成されています。この試験は、監督済みの形式でも利用できます。つまり、認定プロセスの整合性を確保するために、認定テストセンターによって管理されます。
質問 # 29
A customer reports that some of their client computers are unable to access a FlexGroup over CIFS. This
problem involves only their older Windows XP clients and some printers and scanners.
In this scenario, which statement Is correct?
- A. These systems use the SMQI protocol which Is an unsupported feature in FlexGroup
- B. FlexGroup requires CIFS shares to use the Continuously Available Feature, which these clients do not
support. - C. FlexGroup requires CIFS shares to be located in qtrees, which these clients do not support.
- D. These systems use Offloaded Data Transfer, which is an unsupported feature in FlexGroup.
正解：B
質問 # 30
After a normal power down of both nodes forbuilding maintenance, Node01 of a 2-node cluster cannot be
powered back up; however, all disk shelves are powered.
Which action should be performed to bring the cluster online and allow Node02 to serve data?
- A. Recreate the cluster with the system configuration recovery cluster recreate -from node command.
- B. Reboot the node With the system node reboot -node Node02 -bypass-optimization true command.
- C. Reinitialize the cluster with option 4a from the boot menu.
- D. Perform a takeover with the storage failover takeover -ofnode Node01 -option forcecommand.
正解：A
質問 # 31
You notice poor performance on your FlexGroup and execute the system node run -node * flexgroup show
command for more Information. You notice the "Urge" column has non-zero values.
In this scenario, which statement is true?
- A. The constituent volumes are out ofInodes.
- B. The constituent volumes are completely full.
- C. The data placement is uneven.
- D. The aggregate is completely full.
正解：D
質問 # 32
You Just used the CLI to create a NetApp ONTAP FlexGroup Volume on a NetApp Cloud Volumes ONTAP
instance. After creation, you notice odd behavior in NetApp Cloud Manager.
In this scenario,what Is the reason for this behavior?
- A. The Capacity Management Mode within Cloud Manager should be set to Manual.
- B. The Capacity Management Mode within Cloud Manager should be set to Automatic.
- C. Cloud Manager must be used to provision the FlexGroup volume.
- D. Cloud Volumes ONTAP does not support FlexGroup volumes.
正解：C
質問 # 33
After users start reporting the Inability to create new flies in a CIFS share, you find EMS events for
wafl.dir.size.max logged for the volume of the SVM to which the share points.
In this scenario, which action should you take to solve this issue?
- A. Increase the maximum directory size for the volume.
- B. Delete unneeded files from the directory.
- C. Move the volume to a different aggregate.
- D. Increase the maximum numberof files for the volume.
正解：D
質問 # 34
Your customer noticed in NetApp Active IQ that their NetApp Cloud Volumes ONTAP forAzure HA solution
is no longer sending AutoSupport messages over HTTPS. A support ticket has been opened to find out why.
No changes have been made to the Cloud Volumes ONTAP for Azure HA environment.
In this scenario, which two autosupport command parameters should be used to validate that AutoSupport Is
working properly? {Choose two.)
- A. -to
- B. -proxy-url
- C. -transport
- D. -mail-hosts
正解：B、D
質問 # 35
You are attempting to connect a NetApp ONTAP cluster to a very complex network that requires LIFs to fail
over across subnets.
How would youaccomplish this task?
- A. Configure an equal number of UFs on each subnet.
- B. Configure a I IF failover policy for each subnet inside a single broadcast domain.
- C. Configure VIP LIFs using BGP.
- D. Configure VIP LIFs using OSPF.
正解：C
質問 # 36
A customer reports that while Installing Windows updates on their external Vscan servers, clients couldnot
access any files on their CIF-S SVM. The problem disappeared after the update process was completed. The
customer wants to prevent this issue from happening during the next patch window.
In this scenario, what are two ways to accomplish this task? (Choose two.)
- A. Modify the CIFS shares to be continuously available (CA) shares.
- B. Disable the -scan-mandatory flag in the Vscan policy.
- C. Update the Vscan servers one at a time.
- D. Enable the -scan-mandatory flag in the Vscan policy.
正解：A、D
質問 # 37
The motherboard of Node-01 is being replaced. To perform this task, a takeover was Initiated from Node-02.
Node-02 panics showing the string below.
PANIC; Permanent errors on all HA mailbox disks (while marshalling header) in SKprocess
fnmbx_instanceWorker on release 9.5P8 (C)
What has happened in this situation?
- A. While in maintenance mode, the sldiag device show command was executed.
- B. While in maintenance mode, the mailbox destroy local command was executed.
- C. While in maintenance mode, the fcadmin device_map command was executed.
- D. While in maintenance mode, the HA_config show command was executed.
正解：C
質問 # 38
Your customer calls you because one application is not able to access a NetApp ONTAP S3 bucket. While
reviewing the EMS log on the cluster, you see the following message:
The same credentials work in another application.
In this scenario, what would cause this problem?
- A. The application is using v4 signatures.
- B. The application is trying to log in as an anonymous user.
- C. The application is trying to access using the HTTP protocol.
- D. The application is using v2 signatures.
正解：B
質問 # 39
A user reports that a colleague saved a file called Test.txt from a UNIX system to a multiprotocol volume.
When opening the file later from a Windows system, it was not the file that they wanted. The file that they
wanted was named TEST~1.TXT.
Which statement explains this behavior?
- A. Windows Volume Shadow Copy Service stored an older version of the file.
- B. UNIX name mapping updated the filename.
- C. A Snapshot copy preserved two versions of the file.
- D. Case Insensitivity of SMB clients caused the file to be displayed with a different name.
正解：C
質問 # 40
You have a customer who is concerned with high CPU and disk utilization on their SnapMirror destination
system. They are worried about high CPU and disk usage without any user operations.
In this situation, what should you tell the customer?
- A. Suggest that the customer manually cancel any scanners on the destination to reduce CPU usage.
- B. Suggest that the customer throttle their SnapMirror relationships to reduce resource consumption.
- C. Explain that background tasks such as SnapMirror throttle up in the absence of user workload.
- D. Explain that only user workload should use the CPU and Investigate further.
正解：A
質問 # 41
You receive the "Unable to connect to the management gateway server"error when trying to connect to a node
management IP.
In this situation, how do you determine whether core dumps are generated for the mgwd user space process?
- A. Log in to the nodeshell using the node console and collect the core dumps from the nodeshell.
- B. Log in to the service processor and collect the core dumps from the service processor.
- C. Log in to the systemshell and collect core dumps from thesystemshell.
- D. Log in to the clustershell using the node console and collect the core dumps from the clustershell.
正解：B
質問 # 42
You are deploying NetApp ONTAP Select. When trying to add VMware vCenter to the inventory, you receive
the message shown below.
Credential authentication failed for x.x.x.x with: HostConnectionFailed
In this scenario, how would you correct this problem?
- A. Change the IP address of the vCenter server.
- B. Change the IP address of the ONTAP Select Deploy VM.
- C. Change the vCenter password.
- D. Change the gateway address of the ONTAP Select Deploy VM.
正解：C
質問 # 43
Your customer complains that u host will constantly report losing a connection to the iSCSl target and then
report that the session was reestablished.
As shown in the exhibit, what is a cause of this flapping?
- A. A host with an IP address of 172.20.10.80 and a second host with an IP address of 10.10.20.60 have the
same IQN. - B. A host with an IP address of 172.20.10.80 and a secondIP address of 10.10.20.60 is accessing different LUNs.
- C. A host with an IP address of 172.20.10.80 and a secondhost with an IP address of 10.10.20.60 are in
different initiator groups. - D. A host with an IP address of 172.20.10.80 and a second host with an IP address of 10.10.20.60 are
accessing the same LUN.
正解：D
質問 # 44
A customer's storage administrator Informs you about the deactivated Automatic Switchover (AUSO) feature
on their MetroCluster IP environment.
What Information would you tell your customer in this scenario?
- A. The AUSO feature is not available in Metrocluster IP installations by design.
- B. A faulty link automatically deactivated the AUSO feature.
- C. The AUSO feature cannot be activated due to a non-mirrored aggregate.
- D. This is a configuration failure, you can activate that feature for the customer.
正解：C
質問 # 45
You created a new NetApp ONTAP FlexGroup volume spanning six nodes and 12 aggregates with a total size
of 4 TB. You added millions of files to the FlexGroup volume with a flat directory structure totaling 2 TB, and
you receive anout of apace error message on your host.
What would cause this error?
- A. The inode limit is exceeded in the ONTAP software.
- B. The maximum number of volume constituents has been reached in the ONTAP software.
- C. The maxdirsize Is exceeded in the ONTAP software.
- D. All constituent volumes are full.
正解：A
質問 # 46
Your customer added a new DS4246 shelf to their FAS2750 single-node system and created a new aggregate
on the new shelf. Two weeks later, they log into Active IQ and discover the Medium Impact error shown
below.
Shelves with both connections via the same SAS path detected
Referring to the exhibit, which statement is correct?
- A. The cables are cabled Incorrectly on the SAS stack.
- B. Active IQ Is not aware of the shelf configuration for a single-node system.
- C. This situation is normal for a FA57750 single-node system.
- D. In a FAS2750 system, the internal shelf is only seen on one path, and the external shelves are seen on
two paths.
正解：C
質問 # 47 
Referring to the exhibit, from which delay center is most of the latency for voll?
- A. NVRAM
- B. Network
- C. Disk
- D. Data
正解：B
質問 # 48
You are trying to deploy a Connector in the AWScloud from NetApp Cloud Manager. The deployment fails
and shows the message 'Insufficient permissions to deploy Cloud Connector". You have verified the AWS
access key and the AWS secret key.
In this scenario, what Is the reason that the deployment failed?
- A. The user lacks the permission to deploy within Cloud Manager.
- B. The required Identity and Access Management (IAM) policies were not Installed.
- C. No AWS Marketplace subscription is associated with Cloud Manager.
- D. The Connector can be deployed only inAWS GovCloud (US).
正解：A
質問 # 49
......
2024年最新のリアルな無料Network Appliance NS0-593試験問題集問題と解答：https://jp.fast2test.com/NS0-593-premium-file.html
NS0-593練習テストエンジン購入前に試そう60試験問題：https://drive.google.com/open?id=1g8TSultCgbsRR69OAY_A_GaoOigGTBnB