[2023年11月16日] 心強いNS0-593のPDF問題集はNS0-593問題
正真正銘のNS0-593問題集で無料PDF問題で合格させる
NS0-593試験に備えるために、受験者はNetApp ONTAPデータストレージソリューションに関する強い理解を持ち、これらのシステムに関連する問題のトラブルシューティングおよび解決能力を持つ必要があります。さらに、受験者はNFS、CIFS、およびiSCSIなどのストレージプロトコルに関する経験を持ち、ネットワーキングおよび仮想化技術の知識も持っている必要があります。NS0-593試験に合格すると、受験者は認定され、NetApp Certified Support Engineers ONTAP Specialistsとして認知され、NetApp ONTAPデータストレージソリューションのサポートおよびメンテナンスにおける専門知識を示すことができます。
NS0-593試験は、NetApp ONTAPストレージシステムのサポートの経験があるIT専門家向けに設計されています。この試験では、NetAppハードウェアとソフトウェアコンポーネント、ONTAPストレージ管理、データ保護、トラブルシューティング技術など、幅広いトピックをカバーしています。試験に合格するには、候補者は、NetAppストレージシステムを詳細に理解し、ストレージ関連の問題を解決するための実用的なアプローチが必要です。
質問 # 32
When an administrator tries to create a share for an existing volume named voll, the process fails with an error.
Referring to the exhibit, what Is the reason for the error?
- A. The CIFS service is not in workgroup mode.
- B. The volume has not beenmounted.
- C. The CIFS service is not authenticating properly with the domain controller.
- D. The volume must have a type of DP.
正解：B
質問 # 33
Recently, a CIFS SVM was deployed and is working. The customer wants to use the Dynamic DNS(DDNS)
capability available in NetApp ONTAP to easily advertise both data UFs to their clients. Currently. DNS is
only responding with one data LIF. DDNS is enabled on the domain controllers.
Referring to the exhibit, which two actions should be performed to enable DDNS updates to work? (Choose
two.)
- A. Remove the NFS protocol from the cifs_01 data LIF.
- B. Enable the -is-enabledparameter for the SVM DDNS services
- C. Enable the -use-secure parameter for the SVM DDNS services.
- D. Disable the -vserver-fqdn parameter for the SVM DDNS services.
正解：B、D
質問 # 34
A user reports that a colleague saved a file called Test.txt from a UNIX system to a multiprotocol volume.
When opening the file later from a Windows system, it was not the file that they wanted. The file that they
wanted was named TEST~1.TXT.
Which statement explains this behavior?
- A. UNIX name mapping updated the filename.
- B. A Snapshot copy preserved two versions of the file.
- C. Windows Volume Shadow Copy Service stored an older version of the file.
- D. Case Insensitivity of SMB clients caused the file to be displayed with a different name.
正解：B
質問 # 35
A customer with an FC MetroClusterconfiguration that is running NetApp ONTAP 9.8 software experienced a
site outage and wants to know why the MetroClusler configuration did not switch over to the other site.
What are two reasons for this problem? (Choose two.)
- A. There was a failed PSU inthe switchover site.
- B. An ISL link was not operating at 16Gbps.
- C. The ISLs were down between the sites.
- D. The site had unmirrored aggregates.
正解：A、D
質問 # 36
A customer reports that some of their client computers are unable to access a FlexGroup over CIFS. This
problem involves only their older Windows XP clients and some printers and scanners.
In this scenario, which statement Is correct?
- A. FlexGroup requires CIFS shares to be located in qtrees, which these clients do not support.
- B. FlexGroup requires CIFS shares to use the Continuously Available Feature, which these clients do not
support. - C. These systems use Offloaded Data Transfer, which is an unsupported feature in FlexGroup.
- D. These systems use the SMQI protocol which Is an unsupported feature in FlexGroup
正解：B
質問 # 37
A storage administrator reports that a monitoring toot is reporting that the storage controller reads between
90% to 93% CPU use. You run the sysstat -m command against thenode in question.
Referring to the exhibit, which statement is correct?
- A. The CPU Is not a first-order monitoring metric for ONTAP.
- B. You should immediately investigate further bygathering perfstat data and opening a support case.
- C. The customer should be advised to exclude certain workflows to reduce use.
- D. High network exempt use could be a problem.
正解：B
質問 # 38
Which two throughput elements are controlled by host applications? (Choose two.)
- A. operation size
- B. Jitter
- C. concurrency
- D. latency
正解：B、D
質問 # 39
You are deploying NetApp ONTAP Select. When trying to add VMware vCenter to the inventory, you receive
the message shown below.
Credential authentication failed for x.x.x.x with: HostConnectionFailed
In this scenario, how would you correct this problem?
- A. Change the IP address of the ONTAP Select Deploy VM.
- B. Change the IP address of the vCenter server.
- C. Change the vCenter password.
- D. Change the gateway address of the ONTAP Select Deploy VM.
正解：C
質問 # 40
After a motherboard replacement on a NetApp AFF A300 in a SAN environment, the customer states that
ports 0e and 0f are unable toconnect to the fabric. The ports report "offline".
What would you examine first to troubleshoot the issue?
- A. vserver fcp wwpn-alias show command output
- B. storage port show command output
- C. system node hardware unified-connect show command output
- D. vserver fcp interface show command output
正解：B
質問 # 41
A customer reports that while Installing Windows updates on their external Vscan servers, clients couldnot
access any files on their CIF-S SVM. The problem disappeared after the update process was completed. The
customer wants to prevent this issue from happening during the next patch window.
In this scenario, what are two ways to accomplish this task? (Choose two.)
- A. Enable the -scan-mandatory flag in the Vscan policy.
- B. Disable the -scan-mandatory flag in the Vscan policy.
- C. Modify the CIFS shares to be continuously available (CA) shares.
- D. Update the Vscan servers one at a time.
正解：A、C
質問 # 42
You have a NetApp ONTAP cluster consisting of four NetApp FAS8200 controllers with two NetApp
CN1610 cluster switches running ONIAP 9.8 software. You are receiving several alert messages stating that
the cluster network has degraded. After troubleshooting, you determine that the errors are being generated
fromNode 2, interface e0b.
In this scenario, what should you do first to solve this problem?
- A. Replace the motherboard on Node 2.
- B. Replace the Twinax cable between Node 2, Interface e0b. and the NetApp CN1610 switch.
- C. Replace both NetApp CN1610 switches.
- D. Replace the NetApp CN1610 switch that connects to Node 2, interface e0b.
正解：A
質問 # 43
You are optimizing your Cloud Volumes ONTAP. For interoperability and consolidation purposes, you need
to know the storagelimits.
In this scenario, which source should be reviewed?
- A. Cloud Central
- B. Hardware Universe
- C. Interoperability Matrix Tool (IMT)
- D. NetApp Cloud Volumes ONTAP Release Notes
正解：D
質問 # 44
An administrator receives the following error message:
What are two causes for this error? (Choose two.)
- A. A disk is falling.
- B. There Is excessive SSD load causing the wear leveling to become unbalanced.
- C. An SSD disk is performing garbage collection to create a dense data layout.
- D. There is excessive SATA HDD load.
正解：B、D
質問 # 45 
Referring to the exhibit, what do you need to do to return the MetroCluster to a normal state?
- A. Enter the storage failover giveback command on Site B.
- B. Enter the metrocluster switchback command on Site A.
- C. Enter the metroclustor switchback command on Site B.
- D. Enter the storage failover giveback command on Site A.
正解：B
質問 # 46
You are trying to deploy a Connector in the AWScloud from NetApp Cloud Manager. The deployment fails
and shows the message 'Insufficient permissions to deploy Cloud Connector". You have verified the AWS
access key and the AWS secret key.
In this scenario, what Is the reason that the deployment failed?
- A. The required Identity and Access Management (IAM) policies were not Installed.
- B. The user lacks the permission to deploy within Cloud Manager.
- C. The Connector can be deployed only inAWS GovCloud (US).
- D. No AWS Marketplace subscription is associated with Cloud Manager.
正解：B
質問 # 47
After expanding a two-node AFF A300 cluster with two AFF A700 nodes, you observe latencies when data is
accessed indirectly. The system node run -node -command netstat command shows retransmits and packet
drops on the LIFs. The AFF A700 nodes with 40 Gbps and the AFF A300 connect with 10 Gbps to the cluster
interconnect. You are using Cisco Nexus 3132Q cluster interconnect switches. You just updated to ONTAP
9.8 software.
In this scenario, what is causing this problem?
- A. The 10 Gbps to 10 Gbps cluster Interconnect is creating a speed mismatch.
- B. AFF A300 and AFF A700 node mixing Isnot supported in ONTAP 9.8 software.
- C. There is an NXOS firmware mismatch, verify in the Interoperability Matrix (1MTJ for a supportedversion.
- D. The AFF A300 Is using an adapter card for the cluster Interconnect, but only onboard ports are supported.
正解：A
質問 # 48
You receive the panic message shown in the exhibit.
In this scenario, which component should you troubleshoot first?
- A. the CPU
- B. the PCI card in slot 3
- C. the MetroCluster FC-Vl card in slot 6
- D. the memory module in slot 1
正解：A
質問 # 49
Your customer is running a NetApp AFF A800 system with NetAppONTAP 9.8 software and states that their
NS224 shelf is not showing with the correct shelf ID. You analyze the data and the shelf shows an
identification of "1.SHFHUXXXXXXXXXX."
What is the cause of the reported Issue?
- A. The shelf was cabled Incorrectly.
- B. The shelf has been power cycled.
- C. The shelf had a disk replaced too quickly.
- D. A new shelf was added to the controller.
正解：D
質問 # 50
After users start reporting the Inability to create new flies in a CIFS share, you find EMS events for
wafl.dir.size.max logged for the volume of the SVM to which the share points.
In this scenario, which action should you take to solve this issue?
- A. Increase the maximum numberof files for the volume.
- B. Move the volume to a different aggregate.
- C. Increase the maximum directory size for the volume.
- D. Delete unneeded files from the directory.
正解：A
質問 # 51
You want to assign storage access to an NVMe protocol host.
Which three objects must beconfigured to accomplish this task? (Choose three.)
- A. an NVMe LUN
- B. the NVMe subsystem
- C. an NVMe LIF
- D. the NVMe namespace
- E. the NVMe broadcast domain
正解：B、C、E
質問 # 52
Your customer complains that u host will constantly report losing a connection to the iSCSl target and then
report that the session was reestablished.
As shown in the exhibit, what is a cause of this flapping?
- A. A host with an IP address of 172.20.10.80 and a second host with an IP address of 10.10.20.60 have the
same IQN. - B. A host with an IP address of 172.20.10.80 and a secondIP address of 10.10.20.60 is accessing different LUNs.
- C. A host with an IP address of 172.20.10.80 and a second host with an IP address of 10.10.20.60 are
accessing the same LUN. - D. A host with an IP address of 172.20.10.80 and a secondhost with an IP address of 10.10.20.60 are in
different initiator groups.
正解：C
質問 # 53
......
NS0-593認定試験は、ストレージとデータ管理の分野でキャリアを進めようとしているIT専門家にとって貴重な資格です。熟練したストレージ管理者とサポートエンジニアに対する需要の増加に伴い、この認定は、個人が競争から際立っていることを支援し、NetAppストレージソリューションをサポートする専門知識を実証することができます。
結果を保証するには最新2023年11月無料：https://jp.fast2test.com/NS0-593-premium-file.html
有効な問題最新版を無料で試そうNS0-593試験問題集解答：https://drive.google.com/open?id=1g8TSultCgbsRR69OAY_A_GaoOigGTBnB