2022年最新のNS0-593プレミアム資料テストPDFの無料問題集お試しセット
試験合格を向けてNS0-593今すぐ弊社のNetApp NCSE試験パッケージを使おう
Network Appliance NS0-593 認定試験の出題範囲：
| トピック | 出題範囲 |
|---|---|
| トピック 1 |
|
| トピック 2 |
|
| トピック 3 |
|
| トピック 4 |
|
| トピック 5 |
|
| トピック 6 |
|
質問 13
You are optimizing your Cloud Volumes ONTAP. For interoperability and consolidation purposes, you need
to know the storagelimits.
In this scenario, which source should be reviewed?
- A. NetApp Cloud Volumes ONTAP Release Notes
- B. Cloud Central
- C. Interoperability Matrix Tool (IMT)
- D. Hardware Universe
正解: A
質問 14
Which two statements about NetApp Cloud Volumes ONTAP licenses ate true? (Choose two.)
- A. Having an Essentials package enables you to convert to another licensing option.
- B. Capacity-based license packages support only single-node configurations.
- C. BYOL licenses are purchased directly from NetApp.
- D. AWS Marketplace contracts cannot be mixed with BYOL.
正解: B,C
質問 15
You are deploying NetApp ONTAP Select. When trying to add VMware vCenter to the inventory, you receive
the message shown below.
Credential authentication failed for x.x.x.x with: HostConnectionFailed
In this scenario, how would you correct this problem?
- A. Change the vCenter password.
- B. Change the gateway address of the ONTAP Select Deploy VM.
- C. Change the IP address of the vCenter server.
- D. Change the IP address of the ONTAP Select Deploy VM.
正解: A
質問 16
An administrator receives the following error message:
What are two causes for this error? (Choose two.)
- A. A disk is falling.
- B. An SSD disk is performing garbage collection to create a dense data layout.
- C. There is excessive SATA HDD load.
- D. There Is excessive SSD load causing the wear leveling to become unbalanced.
正解: C,D
質問 17
Your customer calls you because one application is not able to access a NetApp ONTAP S3 bucket. While
reviewing the EMS log on the cluster, you see the following message:
The same credentials work in another application.
In this scenario, what would cause this problem?
- A. The application is using v2 signatures.
- B. The application is trying to log in as an anonymous user.
- C. The application is using v4 signatures.
- D. The application is trying to access using the HTTP protocol.
正解: B
質問 18
After a normal power down of both nodes forbuilding maintenance, Node01 of a 2-node cluster cannot be
powered back up; however, all disk shelves are powered.
Which action should be performed to bring the cluster online and allow Node02 to serve data?
- A. Recreate the cluster with the system configuration recovery cluster recreate -from node command.
- B. Reinitialize the cluster with option 4a from the boot menu.
- C. Reboot the node With the system node reboot -node Node02 -bypass-optimization true command.
- D. Perform a takeover with the storage failover takeover -ofnode Node01 -option forcecommand.
正解: A
質問 19
A system panic due to an "L2 watchdog timeout hard reset" error occurred. You have found a FIFO message
in the SP log.
Which FIFO message Is useful for Investigating this Issue?
- A. ONTAP Shutdown BBSP:C=00 L=2F FIFO:
- B. before NMI BBSP:C=00 L=00 FIFO: F3 F2 F1 F0 5 B2 0 0 0 80 20 E F E3 C0 C2 3 4 6 7 9 9 A
- C. BIOS exit BBSP:C=2F L=20 FIFO: 2 C8 C9 C4 24 4 6 18 7 8 11
- D. before Reset BBSP:C=00 L=00 FIFO:
正解: C
質問 20
You ate connecting a Windows Server 2019 hostto ISCSI LUNs on a 4-node AFF A250 cluster running
NetApp ONIAP 9.8 software. The host is unable to connect to the target interface, and the ONTAP event log
has the message shown below.
ISCSI: network interface identifier disabled for use; incoming connection discarded
In this scenario, what is the cause of this connection issue?
- A. CHAP isnot configured correctly for the specified initiator.
- B. The WWPN was not added to the initiator group.
- C. The iSCSI service is not enabled on the interface.
- D. iSNS is not enabled on the storage virtual machine.
正解: B
質問 21
You recently discovered the error message shown below in your ONTAP logs.
What should be your first action to correct this Issue?
- A. Use the wafliron command against my_data_vol to solve the inconsistency on the volume.
- B. Determine the root cause behind the inconsistency before attempting any recovery procedure.
- C. Power cycle all the disk storage shelves that contain drives of the aggregate with the my_data_vol
volume. - D. Use the storage takeover command on the storage controller that contains my_data_vol.
正解: C
質問 22
You created a new NetApp ONTAP FlexGroup volume spanning six nodes and 12 aggregates with a total size
of 4 TB. You added millions of files to the FlexGroup volume with a flat directory structure totaling 2 TB, and
you receive anout of apace error message on your host.
What would cause this error?
- A. The maxdirsize Is exceeded in the ONTAP software.
- B. The inode limit is exceeded in the ONTAP software.
- C. The maximum number of volume constituents has been reached in the ONTAP software.
- D. All constituent volumes are full.
正解: B
質問 23
A customer's storage administrator Informs you about the deactivated Automatic Switchover (AUSO) feature
on their MetroCluster IP environment.
What Information would you tell your customer in this scenario?
- A. The AUSO feature cannot be activated due to a non-mirrored aggregate.
- B. This is a configuration failure, you can activate that feature for the customer.
- C. The AUSO feature is not available in Metrocluster IP installations by design.
- D. A faulty link automatically deactivated the AUSO feature.
正解: A
質問 24
A customer enabled NFSv4.0on an SVM and changed the client mount from NFSv3 to NFSv4. Afterwards,
the customer found that the directory owner was changed from root to nobody.
In this scenario, which statement is true?
- A. The customer did not configure name services on the SVM.
- B. The ID mapping domains do not match between the client and server.
- C. The clients must be restarted to start using NFSv4.
- D. The export policy is not configured properly.
正解: D
質問 25
You are trying to deploy a Connector in the AWScloud from NetApp Cloud Manager. The deployment fails
and shows the message 'Insufficient permissions to deploy Cloud Connector". You have verified the AWS
access key and the AWS secret key.
In this scenario, what Is the reason that the deployment failed?
- A. The required Identity and Access Management (IAM) policies were not Installed.
- B. The Connector can be deployed only inAWS GovCloud (US).
- C. No AWS Marketplace subscription is associated with Cloud Manager.
- D. The user lacks the permission to deploy within Cloud Manager.
正解: D
質問 26
Your customer added a new DS4246 shelf to their FAS2750 single-node system and created a new aggregate
on the new shelf. Two weeks later, they log into Active IQ and discover the Medium Impact error shown
below.
Shelves with both connections via the same SAS path detected
Referring to the exhibit, which statement is correct?
- A. In a FAS2750 system, the internal shelf is only seen on one path, and the external shelves are seen on
two paths. - B. The cables are cabled Incorrectly on the SAS stack.
- C. This situation is normal for a FA57750 single-node system.
- D. Active IQ Is not aware of the shelf configuration for a single-node system.
正解: C
質問 27
Which two automation methods does NetApp ONTAP Select support? (Choose two.)
- A. Docker
- B. PHP
- C. REST
- D. Anslble
正解: C,D
質問 28
After a motherboard replacement on a NetApp AFF A300 in a SAN environment, the customer states that
ports 0e and 0f are unable toconnect to the fabric. The ports report "offline".
What would you examine first to troubleshoot the issue?
- A. storage port show command output
- B. vserver fcp wwpn-alias show command output
- C. system node hardware unified-connect show command output
- D. vserver fcp interface show command output
正解: A
質問 29
Which two throughput elements are controlled by host applications? (Choose two.)
- A. operation size
- B. concurrency
- C. Jitter
- D. latency
正解: C,D
質問 30
Your customer installed the shelf firmware for their NS224 shelf over a week ago, and the firmware has
notupgraded on shelf 1 module B. The customer wants to know what the next steps would be to get the
firmware upgraded after verifying that the shelf firmware is indeed loaded onto the system.
Which step would you perform to complete the firmware upgrade?
- A. Reseat the NSM100 module.
- B. Reseat the PSU of the shelf.
- C. Power cycle the shelf.
- D. Reseat the disk in Bay 0.
正解: C
質問 31
You have a NetApp ONTAP cluster consisting of four NetApp FAS8200 controllers with two NetApp
CN1610 cluster switches running ONIAP 9.8 software. You are receiving several alert messages stating that
the cluster network has degraded. After troubleshooting, you determine that the errors are being generated
fromNode 2, interface e0b.
In this scenario, what should you do first to solve this problem?
- A. Replace both NetApp CN1610 switches.
- B. Replace the Twinax cable between Node 2, Interface e0b. and the NetApp CN1610 switch.
- C. Replace the NetApp CN1610 switch that connects to Node 2, interface e0b.
- D. Replace the motherboard on Node 2.
正解: D
質問 32
You want to assign storage access to an NVMe protocol host.
Which three objects must beconfigured to accomplish this task? (Choose three.)
- A. the NVMe broadcast domain
- B. an NVMe LUN
- C. the NVMe namespace
- D. the NVMe subsystem
- E. an NVMe LIF
正解: A,D,E
質問 33
......
2022年最新の問題をマスターNetApp NCSE合格目指してNS0-593リアル試験！：https://jp.fast2test.com/NS0-593-premium-file.html
完全版は2022年最新のNS0-593試験問題集ガイドはトレーニング専門Fast2test：https://drive.google.com/open?id=1g8TSultCgbsRR69OAY_A_GaoOigGTBnB