素晴らしいNS0-593試験問題集試そうNS0-593問題集PDF
NS0-593問題集PDFでNS0-593リアル試験問題解答
質問 # 14
A 2-node cluster hosts only NAS data UFs. Allnodes lose access to the cluster network.
Referring to the exhibit, which statement is correct?
- A. NAS data UFs are accessible on only the node that has Epsilon.
- B. No takeover event will occur and NAS data UFs will not be accessible.
- C. All nodes in the cluster reset and NAS data UFs are not accessible after reboot.
- D. Both nodes race to takeover the other, one node will takeover the other node.
正解：C
質問 # 15
You are attempting to connect a NetApp ONTAP cluster to a very complex network that requires LIFs to fail
over across subnets.
How would youaccomplish this task?
- A. Configure an equal number of UFs on each subnet.
- B. Configure a I IF failover policy for each subnet inside a single broadcast domain.
- C. Configure VIP LIFs using BGP.
- D. Configure VIP LIFs using OSPF.
正解：C
質問 # 16
Your customer is running a NetApp AFF A800 system with NetAppONTAP 9.8 software and states that their
NS224 shelf is not showing with the correct shelf ID. You analyze the data and the shelf shows an
identification of "1.SHFHUXXXXXXXXXX."
What is the cause of the reported Issue?
- A. A new shelf was added to the controller.
- B. The shelf has been power cycled.
- C. The shelf was cabled Incorrectly.
- D. The shelf had a disk replaced too quickly.
正解：A
質問 # 17
You are trying to deploy a Connector in the AWScloud from NetApp Cloud Manager. The deployment fails
and shows the message 'Insufficient permissions to deploy Cloud Connector". You have verified the AWS
access key and the AWS secret key.
In this scenario, what Is the reason that the deployment failed?
- A. The user lacks the permission to deploy within Cloud Manager.
- B. The Connector can be deployed only inAWS GovCloud (US).
- C. No AWS Marketplace subscription is associated with Cloud Manager.
- D. The required Identity and Access Management (IAM) policies were not Installed.
正解：A
質問 # 18
Which two statements about NetApp Cloud Volumes ONTAP licenses ate true? (Choose two.)
- A. Having an Essentials package enables you to convert to another licensing option.
- B. BYOL licenses are purchased directly from NetApp.
- C. Capacity-based license packages support only single-node configurations.
- D. AWS Marketplace contracts cannot be mixed with BYOL.
正解：B、C
質問 # 19
You have a NetApp ONTAP cluster consisting of four NetApp FAS8200 controllers with two NetApp
CN1610 cluster switches running ONIAP 9.8 software. You are receiving several alert messages stating that
the cluster network has degraded. After troubleshooting, you determine that the errors are being generated
fromNode 2, interface e0b.
In this scenario, what should you do first to solve this problem?
- A. Replace the motherboard on Node 2.
- B. Replace both NetApp CN1610 switches.
- C. Replace the Twinax cable between Node 2, Interface e0b. and the NetApp CN1610 switch.
- D. Replace the NetApp CN1610 switch that connects to Node 2, interface e0b.
正解：A
質問 # 20
A customer reports that some of their client computers are unable to access a FlexGroup over CIFS. This
problem involves only their older Windows XP clients and some printers and scanners.
In this scenario, which statement Is correct?
- A. FlexGroup requires CIFS shares to use the Continuously Available Feature, which these clients do not
support. - B. These systems use Offloaded Data Transfer, which is an unsupported feature in FlexGroup.
- C. These systems use the SMQI protocol which Is an unsupported feature in FlexGroup
- D. FlexGroup requires CIFS shares to be located in qtrees, which these clients do not support.
正解：A
質問 # 21
Your customer mentions that they have accidentally destroyed both rootaggregates in their two-node cluster.
In this scenario, what are two actions that must be performed? (Choose two.)
- A. Re-create the cluster from the local backup.
- B. Rejoin the second node to the re-created cluster.
- C. Install ONTAP from a USB device.
- D. Re-create the cluster from the remote backup.
正解：B、C
質問 # 22
You have a customer complaining of long build times from their NetApp ONTAP-based datastores. They
provided you packet traces from the controller and client. Analysis of these traces shows an average service
response time of 1 ms. QoS outputconfirms the same. The client traces are reporting an average of 15 ms in
the same time period.
In this situation, what would be your next step?
- A. A sync core should be triggered.
- B. The client that reports high latency should be investigated.
- C. The cluster is responding slowly and requires further investigation using performance archives.
- D. The cluster interconnects should be investigated.
正解：B
質問 # 23
Your customer added a new DS4246 shelf to their FAS2750 single-node system and created a new aggregate
on the new shelf. Two weeks later, they log into Active IQ and discover the Medium Impact error shown
below.
Shelves with both connections via the same SAS path detected
Referring to the exhibit, which statement is correct?
- A. In a FAS2750 system, the internal shelf is only seen on one path, and the external shelves are seen on
two paths. - B. This situation is normal for a FA57750 single-node system.
- C. Active IQ Is not aware of the shelf configuration for a single-node system.
- D. The cables are cabled Incorrectly on the SAS stack.
正解：B
質問 # 24
A customer wants to connect a NetApp AFF A700 system to a 40GbE switch. The controllers have a 10/40G
Ethernet card in slot 4 for this purpose. The link comes up fine on node 2,but it will not come up on node 1.
You look at the AutoSupport data for the nodes in question and see the output shown in the exhibit.
What is the cause of the customer's problem?
- A. The port has an incorrect SFP inserted.
- B. The incorrect cable is used.
- C. The ports are configured for 4x10Gbit instead of 40Gbit.
- D. The cable is plugged in upside down.
正解：C
質問 # 25
Recently, a CIFS SVM was deployed and is working. The customer wants to use the Dynamic DNS(DDNS)
capability available in NetApp ONTAP to easily advertise both data UFs to their clients. Currently. DNS is
only responding with one data LIF. DDNS is enabled on the domain controllers.
Referring to the exhibit, which two actions should be performed to enable DDNS updates to work? (Choose
two.)
- A. Enable the -is-enabledparameter for the SVM DDNS services
- B. Enable the -use-secure parameter for the SVM DDNS services.
- C. Disable the -vserver-fqdn parameter for the SVM DDNS services.
- D. Remove the NFS protocol from the cifs_01 data LIF.
正解：A、C
質問 # 26
You receive the "Unable to connect to the management gateway server"error when trying to connect to a node
management IP.
In this situation, how do you determine whether core dumps are generated for the mgwd user space process?
- A. Log in to the nodeshell using the node console and collect the core dumps from the nodeshell.
- B. Log in to the service processor and collect the core dumps from the service processor.
- C. Log in to the clustershell using the node console and collect the core dumps from the clustershell.
- D. Log in to the systemshell and collect core dumps from thesystemshell.
正解：B
質問 # 27
You have a new VMware vSphere cluster with ESXI 7.0U2 hosts. The hosts are connected to a 4-node AFF
A400 NetApp ONTAP9.8 cluster with FC LUNs. You have a requirement to identify and follow I/Os from
each VM on the shared FC LUN-backed datastores for troubleshooting purposes.
In this scenario, which VMware feature Is supported by ONTAP software to accomplish this task?
- A. Virtual machine ID (VMID)
- B. Network I/O Control (NIOC)
- C. vSphere Cluster Services (vCLS)
- D. Storage I/O Control (SIOC)
正解：C
質問 # 28
A customer reports that while Installing Windows updates on their external Vscan servers, clients couldnot
access any files on their CIF-S SVM. The problem disappeared after the update process was completed. The
customer wants to prevent this issue from happening during the next patch window.
In this scenario, what are two ways to accomplish this task? (Choose two.)
- A. Disable the -scan-mandatory flag in the Vscan policy.
- B. Modify the CIFS shares to be continuously available (CA) shares.
- C. Enable the -scan-mandatory flag in the Vscan policy.
- D. Update the Vscan servers one at a time.
正解：B、C
質問 # 29
You have a 2-node NetApp FAS2750 switchless cluster with twenty-four 1.8 TB disks that is experiencing
performance issues. Upon investigation, you discover severaltype B consistency points.
Referring to the exhibit, which corrective action would address these consistency points?
- A. Convert the 2-node switchless cluster to a 2-node switched cluster.
- B. Replace the twenty-four 1.8 TB disks with twelve 4 TB disks.
- C. Add an additional shelf oftwenty-four 1.8 TB disks.
- D. Create additional data LIFs.
正解：C
質問 # 30
Your customer complains about missing volume snapshot copies on a SnapMlrror destination. While
investigating this case, you notice an executed SnapMirror resync operation in the event logs of the system.
In this scenario, what Is the cause of this problem?
- A. Snapshot copies were manually removed from the destination after the resync.
- B. NetApp ON TAP System Manager removed these snapshot copies due to a snapshot schedule.
- C. The autodelete option removed Snapshot copies before the resync.
- D. Newer Snapshot copies than the common snapshot that was chosen for resync were removed
automatically at the destination.
正解：A
質問 # 31
Your customer Informs you about SnapMlrror problems after upgrading NetApp ONTAP software to a newer
version. After investigating the event logs and the SnapMirror history, you see information about delayed
updates of the SnapMirror relationships.
How would your customer prevent such problems in the future?
- A. Quiesce the SnapMirror relationships before upgrading the ONTAP software.
- B. Delete the SnapMirror relationships and create them new after upgrading the ONTAP software.
- C. Modify the schedules of the SnapMirror relationships after upgrading the ONTAP software.
- D. Verify that the cabling of the hardware port that Is responsible for SnapMirror transfers Is correct.
正解：D
質問 # 32
A system panic due to an "L2 watchdog timeout hard reset" error occurred. You have found a FIFO message
in the SP log.
Which FIFO message Is useful for Investigating this Issue?
- A. before Reset BBSP:C=00 L=00 FIFO:
- B. ONTAP Shutdown BBSP:C=00 L=2F FIFO:
- C. BIOS exit BBSP:C=2F L=20 FIFO: 2 C8 C9 C4 24 4 6 18 7 8 11
- D. before NMI BBSP:C=00 L=00 FIFO: F3 F2 F1 F0 5 B2 0 0 0 80 20 E F E3 C0 C2 3 4 6 7 9 9 A
正解：C
質問 # 33
You notice poor performance on your FlexGroup and execute the system node run -node * flexgroup show
command for more Information. You notice the "Urge" column has non-zero values.
In this scenario, which statement is true?
- A. The aggregate is completely full.
- B. The constituent volumes are completely full.
- C. The constituent volumes are out ofInodes.
- D. The data placement is uneven.
正解：A
質問 # 34
You recently discovered the error message shown below in your ONTAP logs.
What should be your first action to correct this Issue?
- A. Use the storage takeover command on the storage controller that contains my_data_vol.
- B. Determine the root cause behind the inconsistency before attempting any recovery procedure.
- C. Use the wafliron command against my_data_vol to solve the inconsistency on the volume.
- D. Power cycle all the disk storage shelves that contain drives of the aggregate with the my_data_vol
volume.
正解：D
質問 # 35
......
有効なNS0-593テスト解答とNetwork Appliance NS0-593試験PDF：https://jp.fast2test.com/NS0-593-premium-file.html
実際に出るNS0-593試験問題集には正確で更新された問題：https://drive.google.com/open?id=1g8TSultCgbsRR69OAY_A_GaoOigGTBnB