2024年最新のSAP C_THR82_2211試験問題には83問があります [Q30-Q55]

2024年最新のSAP C_THR82_2211試験問題には83問があります

無料で使えるC_THR82_2211別格な問題集をダウンロード2024年01月13日に更新された83問があります

質問 # 30
Which features can be enabled and disabled in the Configuration page in Admin Center for the latest version of continuous performance management (CPM)?
Note: There are 3 correct answers to this question.

• A. Prevent feedback deletion by users.
• B. Support multiple roles.
• C. Provide discussion topics.
• D. Access the Delete Continuous Feedback page.
• E. Add activities.

正解：A、B、C

質問 # 31
You are planning to use rating-opt="l" for one of your competency sections, which means that everyone shares one rating box for each item, except for the employee who has a private self-assessment rating box. Which of the following fields should you consider when defining field permissions for this section?
Note: There are 2 correct answers to this question.

• A. manual-rating
• B. subject-item-rating
• C. item-cmt-rating
• D. item-rating

正解：C、D

質問 # 32
Which of the following are possible for the distribution range and group of ratings in guidelines for Calibration Sessions? Note:
There are 3 correct answers to this question.

• A. The total distribution must be exactly 100% for each calibration element, even if distribution ranges are set up.
• B. Operators, such as <, >, >=, < = , =, and "is between" are supported.
• C. Multiple ratings can be grouped together under the same distribution guideline.
• D. Any data source, other than Performance, supports distribution range and group of ratings in guidelines.
• E. An orange bar will indicate that the actual distribution does NOT match the guideline in the Dashboard and Executive Review views.

正解：A、B、D

質問 # 33
Where can you assign a job code to an employee in Admin Center?
Note: There are 2 correct answers to this question.

• A. Update User Information -> Employee Import
• B. Employee Files -> Configure Employee Files
• C. Company Settings -> Manage Job Roles
• D. Update User Information -> Manage Users

正解：A、C

質問 # 34
You are configuring hidden-threshold = "2" for the Direct Report category. What can happen when the subject of the form has only one direct report in the list of raters?
Note: There are 2 correct answers to this question.

• A. The hidden-threshold attribute can cause the Direct Report category to roll up with another category in the Detailed 360 L1 Report.
• B. The hidden-threshold attribute can cause the direct report category to be dropped from the Detailed
  360 Report.
• C. The hidden-threshold attribute can cause a message to be displayed that states the minimum is NOT met for the direct report category.
• D. The hidden-threshold attribute can cause an error message to be displayed with the number of users in the direct report category.

正解：A、B

質問 # 35
Your customer wants to change the default labels in the Summary section, for both Manual Overall Rating and Calculated Overall Rating. Where can the customer do this?
Note: There are 2 correct answers to this question.

• A. In Manage Templates > Choose an alternate label for the rating field
• B. In XML <calc-rating-label>
• C. In XML <calc-summary-rating-label>
• D. In XML <overall-rating-label>

正解：B、D

質問 # 36
Which rating is the rating of record in a Performance Management template configured with a Performance/Potential summary, an Overall summary, and a Customized Weighted Rating summary?

• A. The manual rating from the Overall Summary section
• B. The calculated rating from the Overall Summary section
• C. The manual rating from Customized Weighted Rating section
• D. The manual rating from Performance/Potential summary

正解：A

質問 # 37
Where can you associate a route map with a performance form template?
Note: There are 2 correct answers to this question.

• A. Manage Templates > General Settings
• B. Manage Templates > General Settings > Show advanced options
• C. Manage Templates > Advanced Settings
• D. Manage Route Maps > Related Templates

正解：A、C

質問 # 38
A user is uploading attachments to activities in continuous performance management (CPM).Which of the following are possible?
Note: There are 2 correct answers to this question.

• A. The user can only download an attachment they have previously uploaded.
• B. The user can upload attachments to activities in both legacy and latest CPM versions.
• C. The user can upload a maximum of 5 attachments per activity.
• D. The user can upload an attachment to their own activity or to an activity created on their behalf.

正解：C、D

質問 # 39
Which of the following field types can be configured as custom fields in the goal plan?
Note: There are 3 correct answers to this question.

• A. table
• B. bool
• C. comment
• D. textarea
• E. enum

正解：C、D、E

質問 # 40
Which of the following scale-type options are supported in 360 Reviews, SAP Fiori Version?
Note: There are 3 correct answers to this question.

• A. DROPDOWN
• B. HORIZONTAL_RADIO
• C. FREETEXT
• D. STAR
• E. CIRCLE

正解：A、D、E

質問 # 41
What can you do with the Beta Goal Import feature?
Note: There are 3 correct answers to this question.

• A. Delete goal comments.
• B. Align goals.
• C. Delete goals.
• D. Update goals.
• E. Transfer existing goals between employees.

正解：B、C、D

質問 # 42
What can users do with a form during a collaborative route map step?

• A. The form is in all the collaborative step participants' inboxes at the same time, but only one user can make edits at a time.
• B. The form is in all the collaborative step participants' inboxes at the same time and all users can edit the form simultaneously.
• C. The form can be sent to another user with the Get Feedback button.
• D. The form can be sent back and forth between the different users of the collaborative step before moving to the next step.

正解：A

質問 # 43
Which of the following apply to the Rater section?
Note: There are 2 correct answers to this question.

• A. Custom roles CANNOT be included as participants.
• B. Warning or error messages can be defined if the total number of participants is exceeded or NOT met.
• C. The list pre-populates with participants based on the relationship of their role to the employee being evaluated.
• D. Categories can always be removed if the user has permissions to edit the section.

正解：B、C

質問 # 44
What can an administrator do with the Launch Forms tool?
Note: There are 3 correct answers to this question.

• A. Disable the Ask for Feedback functionality for the forms being launched.
• B. Set specific form template dates for the forms being launched.
• C. Edit introduction texts for custom sections.
• D. Remove one of the form sections.
• E. Select employees based on filters.

正解：B、C、E

質問 # 45
Which of the following are unique admin actions for 360 Reviews that are NOT available in performance forms?
Note: There are 3 correct answers to this question.

• A. Change form dates.
• B. Change participant category.
• C. Restore deleted forms.
• D. Mass decline forms.
• E. Restore completed forms.

正解：B、D、E

質問 # 46
Which of the following options are new enhancements in 360 Reviews, SAP Fiori Version that are NOT available in v11?
Note: There are 2 correct answers to this question.

• A. Stack Ranker 360 form history
• B. EZ Rater
• C. Circle or Star Rating
• D. Form Autosave

正解：A、B

質問 # 47
What issues can you face if the Goal Management-Performance Management Sync Up option is NOT enabled?
Note: There are 2 correct answers to this question.

• A. Performance management reports might include expired Goal Management data if performance forms have NOT been opened since the last modification from Goal Management.
• B. If the performance form has NOT been opened since the last modification coming from Goal Management, the form that might be used by Variable Pay will include outdated Goal Management data.
• C. A goal in a performance management form that is in progress will be outdated if the goal is edited from the Goal Plan.
• D. The list of assigned competencies might be outdated after a change of job code if performance forms have NOT been opened.

正解：A、B

質問 # 48
What must you consider when using job families and roles?

• A. Job roles can be created without assigning them to a job family.
• B. An employee can be assigned to multiple job codes.
• C. Job families must be defined for the major job levels within the organization.
• D. Multiple job codes can be assigned to each job role.

正解：D

質問 # 49
Which of the following roles does the calibration tool use to assign different responsibilities to those in the calibration process?
Note: There are 3 correct answers to this question.

• A. Originator
• B. Participant
• C. Owner
• D. Subject
• E. Facilitator

正解：B、C、E

質問 # 50
Where can you export and import translations of a performance form in Admin Center?

• A. In Import Translations
• B. In Text Replacement
• C. In Manage Form Label Translations
• D. In Manage Languages

正解：C

質問 # 51
Which of these options in the Search and Filter Fields tab under Manage Calibration Settings can you control when setting up a Calibration session?
Note: There are 2 correct answers to this question.

• A. You CANNOT select additional fields to be displayed in the results table, in addition to the default search result fields.
• B. You can select custom filters to be used in people search when you set up a Calibration Session.
• C. You can select additional fields to be displayed in the results table, in addition to the default search result fields.
• D. You can select Filter fields for the filter function across all views in the Calibration Session.

正解：C、D

質問 # 52
Which of the following applies to the Employee Information section?

• A. First Name and Last Name CANNOT be removed.
• B. New elements will become visible in the display options in Manage Templates.
• C. Elements CANNOT be reordered.
• D. Custom elements can be included.

正解：A

質問 # 53
If you are using distribution guidelines in calibration, where are they visible?
Note: There are 3 correct answers to this question.

• A. Bin view
• B. List view
• C. Dashboard view
• D. Executive review
• E. Matrix Grid view

正解：A、C、D

質問 # 54
What attribute do you insert at the beginning of each label tag to make translations active for that label in the form XML?

• A. translation=
• B. msgKey=
• C. translationID=
• D. msgCode=

正解：B

質問 # 55
......

SAP C_THR82_2211試験実践テスト問題：https://jp.fast2test.com/C_THR82_2211-premium-file.html

最新の認定試験C_THR82_2211問題集-実践テスト問題：https://drive.google.com/open?id=1EkfsWAJ3xeeMiUnqbzJUH_8zRqcJGzjf