[2023年11月25日] 有効なSCP-NPMテスト解答とSolarWinds SCP-NPM試験PDF問題を試そう
実際に出るSCP-NPM試験問題集には正確で更新された問題
SCP-NPM試験では、ネットワークトポロジ、デバイスの発見、ネットワークパフォーマンスメトリック、アラートとレポートなど、ネットワークパフォーマンスの監視に関連する幅広いトピックをカバーしています。この試験は、SolarWinds Network Performance Monitor（NPM）ソフトウェアを使用して、ネットワークのパフォーマンスの問題を監視およびトラブルシューティングする際に候補者の習熟度をテストするように設計されています。成功した候補者は、ネットワークパフォーマンスの概念を深く理解し、SolarWinds NPMを使用して問題を迅速かつ効果的に特定して解決することができます。
SCP-NPM試験の準備をするには、候補者はネットワーキングの概念とプロトコルをしっかりと理解し、SolarWinds NPMでの作業経験が必要です。ツールのユーザーインターフェイス、監視機能、およびレポート機能に精通している必要があります。さらに、候補者は、ネットワークの問題のトラブルシューティングや、ルーター、スイッチ、ファイアウォールなどのネットワークデバイスを操作する経験が必要です。
質問 # 45
You configure an alert to send you an email when you have a high CPU load on your devices. Your NPM web console shows several devices have high CPU utilization, but you have not received any emails. What could be the issue?
- A. The alerts are muted on the devices
- B. The hardware resources assigned to the system are too low
- C. The alert threshold is set too high
- D. SNMP is not configured on the devices
正解：A
質問 # 46
Which statistic should you use to determine peak network traffic?
- A. Network latency
- B. Protocol distribution
- C. Bandwidth usage
- D. Packet loss
正解：C
質問 # 47
Network performance over an inter-campus Ethernet link is slow. One side of the connection is experiencing a high number of packet drops. What information in NPM can you review to help discover the cause of the issue?
- A. Packet loss on the nodes on either side of the connection
- B. MTU of each side of the link
- C. Routing tables on each side of the link
- D. Possible Duplex Mismatches
正解：D
質問 # 48
You want to create an alert that notifies you when packet loss meets or exceeds 50%, but only for a select set of nodes in your network. How do you accomplish this?
- A. Set an alert limitation for the nodes to be included in the alert
- B. Create separate SWQL trigger condition for each node to be included in the alert
- C. Set the scope of the alert to only apply to nodes to be included in the alert
- D. Set the alert trigger evaluation to evaluate nodes to be included in the alert
正解：A
質問 # 49
Status, Average Response Time, and Packet Loss are the only node details data you can view for your switch A device. The node details of your identical switch B device show Status, Average Response Time, and Packet Loss and other statistics. How can you monitor the other statistics on switch A and not lose any historical data?
- A. Edit the node properties of switch B and change the polling method to "Status Only: ICMP"
- B. Edit the node properties of switch A and change the polling method to "Status Only: ICMP"
- C. Add switch A again without deleting it first, and this time choose "Most Devices: SNMP and ICMP" as the polling method
- D. Edit the node properties of switch A and change the polling method to "Most Devices: SNMP and ICMP"
- E. Delete switch A, and then add it again and this time choose "Most Devices: SNMP and ICMP" as the polling method
正解：C
質問 # 50
You need to add a new subnet of 500 devices for monitoring. What is the first step to incorporate these devices into NPM?
- A. Perform a Network Discovery
- B. Measure network-wide bandwidth consumption
- C. Add the nodes using the Add Node feature in Manage Nodes
- D. Collect NetFlow from a core router
正解：A
質問 # 51
You use NPM to monitor a set of physical servers. The server team decides to virtualize these servers using VMware. Which part of your virtual infrastructure will NPM no longer be able to monitor?
- A. Virtualization environment tree
- B. VM sprawl monitoring
- C. Virtualization host and VM performance metrics
- D. Virtualization host hardware health
正解：D
質問 # 52
You want to limit a user to only monitor Windows servers and not be able to view other devices that NPM monitors. How can you do this?
- A. Account limitations
- B. Account views
- C. View permissions
- D. Alert limitations
正解：C
質問 # 53
You can make bulk changes, such as changing the polling method, to nodes.
- A. FALSE
- B. TRUE
正解：B
質問 # 54
How can you extend NPM's monitoring to non-standard devices?
- A. Deploying Orion agents
- B. Using OIDs organized in MIBs
- C. Combining licenses from different products
- D. Polling with non-standard protocols
正解：B
質問 # 55
You deploy a new router on your network. What should you do to ensure NPM correctly interprets SNMP traps from the device?
- A. Verify that NPM is using the correct SNMP community strings
- B. Review your firewall rules to ensure the traps are not blocked
- C. Update the MIB database
- D. Contact the router vendor fora firmware update
正解：A
質問 # 56
You want to create an Orion Map that shows the connections between your on-site devices and your servers in the Cloud. You can see the connections between all of the devices on site, but do not have visibility to the connections to your cloud servers.
How do you resolve this?
- A. Open additional firewall ports between the cloud servers and the on-site devices
- B. Switch to SNMP polling for all devices to show the connections between on site and cloud resources
- C. Increase the polling intervals between Orion and the cloud servers
- D. Manually configure connections between onsite and cloud resources in Orion Maps
正解：B
質問 # 57
What is required to monitor tenants in your SDN environment with NPM Cisco ACI monitoring? (Choose all that apply.)
- A. Add an APIC node to NPM
- B. Enable API polling on the APIC node
- C. Enable API polling on all ACI devices
- D. View your SDN environment in Orion Maps
正解：A、C
質問 # 58
Your network has critical devices on the opposite side of a WAN link from you SolarWinds server. You do not want alerts about the devices if the router (name = "target") that connects your SolarWinds server to the remote site is down. How do you configure Alert Suppression?
- A. Suppress alert when all of the following apply: Node Name is equal to "target" / Interface Status is equal to "Warning"
- B. Suppress alert when any of the following apply: Node Name is equal to "target" / Interface Status is equal to "Down"
- C. Suppress alert when any of the following apply: Node Name is equal to "target" / Node Status is equal to "Warning"
- D. Suppress alert when all of the following apply: Node Name is equal to "target" / Node Status is equal ta "Down"
正解：B
質問 # 59
Your team member cannot see any reports in the Orion Console. What can cause this issue?
- A. The SQL server is on a different system than the SolarWinds server
- B. The No Reports limitation is applied to the user account
- C. The Report Writer is not installed
- D. The reports are configured with more than one limitation category
正解：B
質問 # 60
Which is the best way to monitor an SNMP metric that NPM is not monitoring out-of-the-box?
- A. Create a custom poller
- B. Update the SolarWinds MIB database
- C. Enable CLI polling
- D. Node Management utility
正解：A
質問 # 61
NPM polls static properties, and calculates bandwidth consumption based on the total amount of _____ coming through the firewall.
- A. Bytes
- B. Kilobytes
- C. Megabytes
- D. Nibbles
正解：A
質問 # 62
You need to build an Orion Map to show the relationships and connections between your Cloud servers and on premise infrastructure. You add the nodes but discover that the Orion Platform is not automatically mapping the connection between your cloud server and on premise router. You have verified that layer 2 and layer 3 topologies are being polled on the devices. How do you resolve this issue?
- A. You cannot monitor the connection between on premise and off premise devices
- B. You need to configure a custom connection between the cloud node and the on premise node
- C. You need to turn off layer 2 and layer 3 topology polling for cloud monitoring
- D. You need to open the topology ports in your firewall between the on premise node and the cloud node
正解：B
質問 # 63
......
SolarWinds SCP-NPM（SolarWinds Network Performance Monitor（NPM））試験は、ネットワークパフォーマンスの監視と分析においてITプロフェッショナルの習熟度をテストするために設計された認定です。この認定は、ネットワーク管理ソフトウェアの大手プロバイダーであるSolarWindsによって提供され、SolarWinds製品を扱うネットワーク管理者、エンジニア、およびその他のIT専門家の知識とスキルを検証するように設計されています。
SCP-NPM試験問題集でPDF問題とテストエンジン：https://jp.fast2test.com/SCP-NPM-premium-file.html