無料提供中のSCP-NPM試験問題集で（2023年最新のPDF問題集）信頼度の高いテストエンジン
SCP-NPMのPDFで最近更新された問題です集試験点数を伸ばそう
質問 # 10
When you configure a report, you can limit access to specific users.
- A. TRUE
- B. FALSE
正解：A
質問 # 11
The Universal Device Poller retrieves management data in which format?
- A. WMI
- B. ANSI 1
- C. OID
- D. XML
正解：C
質問 # 12
You can use Device Studio to create pollers for CPU and memory?
- A. TRUE
- B. FALSE
正解：A
質問 # 13
You start a new job where NPM is already in use. As soon as you are added to the alert list, you begin receiving "high traffic utilization" alerts from a handful of interfaces.
When you check the alert, the traffic spike has ended. Your new colleagues advise you to ignore these alerts because the spikes rarely last for more than a couple of minutes and are only a concern if they last longer.
How should NPM be modified so you receive fewer false alerts?
- A. Configure the alert so that it resets only when traffic utilization remains high fora sustained period
- B. Increase the status polling frequency on the problematic interfaces
- C. Configure the alert so that it triggers only when traffic utilization remains high for a sustained period
- D. Increase the statistics polling frequency on the problematic interfaces
正解：C
質問 # 14
You deploy a new router on your network. What should you do to ensure NPM correctly interprets SNMP traps from the device?
- A. Verify that NPM is using the correct SNMP community strings
- B. Contact the router vendor fora firmware update
- C. Review your firewall rules to ensure the traps are not blocked
- D. Update the MIB database
正解：A
質問 # 15
You configured devices to send SNMP traps to NPM, but do not see the messages in the Orion Web Console. You verified that the firewall ports are open and the devices are correctly configured.
What can you verify to troubleshoot the cause?
- A. Verify the SNMP trap service is running
- B. Verify you use Log Analyzer to view traps
- C. Verify that you have the SNMP Trap module installed for NPM
- D. Verify you configured the SNMP Traps view in the Orion Web Console
正解：A
質問 # 16
You have two groups of users - one in Sydney and one in Perth. How do you limit the users within the Orion Platform so they only have access to the devices in their location?
- A. Use the Orion Service Manager to limit user access to nodes only in their location
- B. Configure Network Atlas to show only devices in their geographical location
- C. Group devices into geographical Orion groups and use single group Account limitations to limit user access
- D. Configure the Orion Web Console settings to show only devices in the user's geographical location
正解：C
質問 # 17
What is required to monitor tenants in your SDN environment with NPM Cisco ACI monitoring? (Choose all that apply.)
- A. Add an APIC node to NPM
- B. Enable API polling on the APIC node
- C. View your SDN environment in Orion Maps
- D. Enable API polling on all ACI devices
正解：A、D
質問 # 18
Network performance over an inter-campus Ethernet link is slow. One side of the connection is experiencing a high number of packet drops. What information in NPM can you review to help discover the cause of the issue?
- A. Routing tables on each side of the link
- B. Possible Duplex Mismatches
- C. Packet loss on the nodes on either side of the connection
- D. MTU of each side of the link
正解：B
質問 # 19
For any node you monitor, you can use Network Discovery to automatically add child volumes or interfaces for monitoring.
- A. TRUE
- B. FALSE
正解：A
質問 # 20
All users can create their own Orion Maps. How do you limit a user from seeing or working with select monitored entities through the SolarWinds server?
- A. Configure Account limitations to remove access to the Orion user account
- B. Configure Alert imitations to remove access to the Orion user account
- C. Unmanage entities to remove access to the Orion user account
- D. Configure permissions on the monitored entity to remove access to the Orion user account
正解：D
質問 # 21
You receive an alert that one of your routers is experiencing critical level CPU utilization. The router details in the web console show as critical utilization, but you do not consider the utilization on that router to be at a critical level.
What change can you make in NPM to reflect a CPU utilization level you consider to be critical for the device?
- A. Change the trigger threshold on the alert
- B. Change the critical CPU threshold on the node
- C. Copy the alert, change the trigger threshold, and limit the scope on that device
- D. Change the global critical CPU threshold for node statuses
正解：B
質問 # 22
Which is not true for Device Studio Poller?
- A. Polled values are displayed in existing resources
- B. Can poll multiple OIDs for a given technology
- C. Collects data from Orion Failover Engine or Hot Standby Engines
- D. Can perform logical operations or transformations on the polled data
正解：A
質問 # 23
Your network has critical devices on the opposite side of a WAN link from you SolarWinds server. You do not want alerts about the devices if the router (name = "target") that connects your SolarWinds server to the remote site is down. How do you configure Alert Suppression?
- A. Suppress alert when all of the following apply: Node Name is equal to "target" / Node Status is equal ta "Down"
- B. Suppress alert when any of the following apply: Node Name is equal to "target" / Node Status is equal to "Warning"
- C. Suppress alert when any of the following apply: Node Name is equal to "target" / Interface Status is equal to "Down"
- D. Suppress alert when all of the following apply: Node Name is equal to "target" / Interface Status is equal to "Warning"
正解：C
質問 # 24
How do you prevent alerts when an interface is down, without influencing the status of the parent node?
- A. Select Display Interface as Unplugged Rather Than Down in the Node Management view
- B. Select Unmanage Now in the parent node's Maintenance Mode drop-down
- C. Add a dependency with the interface as the parent object, and the interface as the child
- D. Add a dependency with the node as the parent object, and the interface as the child
正解：D
質問 # 25
How can you extend NPM's monitoring to non-standard devices?
- A. Using OIDs organized in MIBs
- B. Deploying Orion agents
- C. Combining licenses from different products
- D. Polling with non-standard protocols
正解：A
質問 # 26
How can you ensure the trigger actions you set on an alert will work?
- A. Simulate a performance interruption on a network device to test the alert trigger
- B. Use the Database Manager to trigger and test the alert
- C. Test the alert from within Alert View of the Web Console
- D. Click Simulate on the assigned trigger action
正解：A
質問 # 27
Users report that email is slow. The Exchange team reports that everything is normal on the mail servers. What NPM statistic can you look at to find what might be causing the issue?
- A. Mail queue length on the Exchange server
- B. Server component monitor status
- C. SMTP service on the Exchange server
- D. Network bandwidth utilization
正解：A
質問 # 28
You monitor three Cisco routers with NPM. NPM reports utilization statistics for two of the routers. NPM only shows Availability and Response Time statuses for the third router. Why do you not see utilization statistics on the third router?
- A. The third node is monitored with the NPM agent
- B. SNMP is not configured correctly on the third node
- C. The third node is monitored with SNMP instead of ICMP
- D. The third node is monitored with WMI instead of SNMP
正解：B
質問 # 29
Which metrics can NPM monitor on an Ethernet switch? (Choose all that apply.)
- A. Duplex mismatches
- B. Buffer misses
- C. Configuration changes
- D. CPU utilization
正解：A、B、C
質問 # 30
Your team member cannot see any reports in the Orion Console. What can cause this issue?
- A. The SQL server is on a different system than the SolarWinds server
- B. The reports are configured with more than one limitation category
- C. The Report Writer is not installed
- D. The No Reports limitation is applied to the user account
正解：D
質問 # 31
......
SCP-NPM完全版問題集には無料PDF問題で合格させる：https://jp.fast2test.com/SCP-NPM-premium-file.html