[2023年07月27日] DES-4122テストエンジンお試しセット、DES-4122問題集PDF [Q31-Q53]

[2023年07月27日] DES-4122テストエンジンお試しセット、DES-4122問題集PDF

最新のEMC DES-4122のPDFと問題集で（2023）無料試験問題解答

EMC DES-4122は、主にPowerEdgeソリューションの導入に焦点を当てた認定試験です。この試験は、PowerEdgeサーバ、ストレージ、ネットワーキング技術を展開、設定、管理する候補者のスキルと知識をテストするよう設計されています。Dell EMC PowerEdgeソリューションの実装とトラブルシューティングにおける技術的なスキルを強化したい個人を対象としています。

DES-4122試験は、PowerEdge実装分野でキャリアを進めたいITプロフェッショナルにとって高度に求められる認定資格です。この認定は、業界の多くの主要企業に認められており、新しい求人機会を探している際には競争優位性を提供することができます。さらに、この認定を取得することで、より高い給与やキャリアアップの機会を得ることができます。

EMC DES-4122試験は、PowerEdgeサーバーソリューションの実装に特化したITプロフェッショナル向けに設計されています。この試験は、展開、設定、管理、トラブルシューティングを含む、PowerEdgeサーバー実装に関連する広範なトピックをカバーしています。これは、PowerEdgeサーバーに関連する概念と技術に深い理解を持つことを要求する上級レベルの試験です。

質問 # 31
What must be done before upgrading OMSA from the 32-bit to the 64-bit version?

A. Disable UAC
B. Back up the configuration
C. Save the license file
D. Uninstall the earlier version

正解：D

質問 # 32
Starting from which Dell EMC PowerEdge server hardware generation is the Micro SD card in the IDSDM/vFlash module supported?

A. 12G
B. 14G
C. 13G
D. 11G

正解：B

質問 # 33
A technician needs to update the IDRAC license on a Dell EMC PowerEdge R740 server from Express to Enterprise. The server has the following components:
* 2x CPUs
* 384 GB RAM
* 6x 1 TB drives
* 1x PSU
The server is connected to active AC, but it is powered down, and it needs to stay powered down No errors are presently displayed How can the technician upgrade the license?

A. Power on the server, then connect to the iDRAC and upgrade iDRAC license before powering down the server
B. Connect to the iDRAC GUI and upgrade the .DRAC license while the server .s powered down
C. The license cannot be upgraded because the user will not allow the server to be powered on
D. The license cannot be upgraded on a single PSU system

正解：B

質問 # 34
A technician is creating a virtual disk in the iDRAC (2x 4 TB NL-SAS in RAID 1) to install Windows 2016 They manually boot to the OS installation media without using the Lifecycle Controller OS Deployment wizard Only the first 2048 GB on the virtual disk can be partitioned How should the technician obtain access to the remaining 2 TB (approximately) of storage?

A. Use the Lifecycle Controller OS Deployment Wizard to deploy the OS on this server
B. Use F2 to go into the BIOS, change the BIOS boot mode to UEFI, and try again
C. Upgrade to a newer version of the operating system
D. Delete the 4 TB virtual disk and create a virtual (boot) disk no larger than 2048 GB

正解：B

質問 # 35
A technician needs to repurpose a Dell EMC PowerEdge server. The server has dual processors with 18 cores each The OS only "sees" 24 threads in total.
Which setting should the technician change in Processor Settings in the System BIOS?

A. Virtualization Technology
B. HyperThreading
C. System Profile
D. Number of Cores per Processor

正解：C

質問 # 36
What is the drive characteristic of a BOSS M.2 drive in a Dell EMC PowerEdge server?

A. Single-level cell
B. Read Intensive
C. Write Intensive
D. Quad-level cell

正解：A

質問 # 37
What can be done using in-band management?

A. Agentless discovery
B. Firmware and driver updates
C. Network bandwidth optimization
D. Remote access

正解：D

質問 # 38
A technician needs to change the iDRAC password on a Dell EMC PowerEdge 14G server in a lights-out datacenter. The be rebooted because it is in production. The iDRAC is configured with the default credentials How could the technician change the iDRAC password?

A. Virtual Console; press F2 after rebooting system
B. iDRAC Web GUI
C. SupportAssist Enterprise
D. OpenManage Server Administrator

正解：B

質問 # 39
What is a characteristic of SupportAssist Enterprise on Dell EMC PowerEdge 14G servers?

A. Includes onsite monitoring and automated collection of system state information
B. Dispatches technical support from Dell for all Dell servers, storage, and networking devices
C. Used for customers that want monitoring of fewer than 1,000 server, storage, and networking devices
D. Proactive, predictive, and automated support technology to enable faster resolution and reporting

正解：D

質問 # 40
An engineer is checking a newly delivered Dell EMC PowerEdge R640 server that will be deployed for a new database environment The inventory consists of:

The server power configuration will be set for gnd redundancy The management switch is 1000 Base-T and the top of rack switches 10Gb What additional component(s) is needed for this configuration?

A. C20 to C21, PDU style, 250 V, 16 Amp, 3 5 meters power cord - qty 2
B. Hot-plug power supply, 1100W - qty 1
C. Dell Networking, cable, 40GbE (QSFP+) to 4 x 10GbE SFP+ passive copper breakout cable, 3 meters - qty 2
D. Hot-plug power supply, 750 W - qty 1

正解：D

質問 # 41
How can a technician know whether IDRAC9 System Lockdown mode is enabled?

A. Lockdown activation message in red box in the iDRAC web GUI Access to LCC is disabled when the server boots
B. Lockdown activation message in yellow box in the iDRAC web GUI Access to LCC is disabled when the server boots
C. Lockdown activation message in red box in the iDRAC web GUI Access to LCC requires a password when the server boots
D. Lockdown activation message in yellow box in the iDRAC web GUI Access to LCC requires a password when the server boots

正解：B

質問 # 42
A Dell EMC PowerEdge R740 server requires a vFlash SD card urgently. Additional vFlash Cards and components from other servers are available.
What is the recommended solution?

A. Reuse an existing vFlash SD card from either a 13G or 14G server
B. Use a configuration option to convert an NVMe drive to a virtual vFlash
C. Reuse an existing vFlash SD card from a 14G server
D. Use a configuration option to convert BOSS to a virtual vFlash

正解：C

質問 # 43
Match each RAID level to its characteristic.

正解：

解説：

質問 # 44
A company that has very specific firmware requirements has acquired Dell EMC PowerEdge servers Any replaced parts of the type must match the original parts identically. The procedure must be as simple as possible with minimal risk.
What action should a technician take to help accomplish this goal?

A. Install and configure a repository manager
B. Enable the Collect System Inventory On Restart (CSIOR) attribute
C. Configure servers to access the remote firmware repository
D. Enable the Match Firmware of Replaced Part setting in the system BIOS

正解：D

質問 # 45
When does a customer require the Service Tag of the Dell EMC PowerEdge server?

A. Obtaining warranty information
B. First time accessing the BIOS
C. First time logging in to iDRAC
D. Activating the OS

正解：C

質問 # 46
A Dell EMC PowerEdge 14G server uses Intel OPTANE DC Persistent Memory in App Direct mode. What is the minimum size DIMM supported for this type of memory?

A. 256 GB
B. 64 GB
C. 512 GB
D. 128 GB

正解：A

質問 # 47
An engineer needs to install an additional PSU on an existing, single PSU Dell EMC PowerEdge R740. They complete the initial installation and cabling procedures. They connect an AC cable and the power distribution unit produces normal AC output. The engineer checks power management and sees that the new PSU is in the Failed state.
What task should be completed to troubleshoot this issue?

A. Set the PSU AC redundancy to 1+0
B. Confirm the System Input Power CAP is not set to Low
C. Set the PSU AC redundancy to 1+1
D. Verify the new PSU is the same type and wattage rating

正解：D

質問 # 48
What is the correct order of steps taken during the BIOS/UEFI Recovery process?

正解：

解説：

質問 # 49
What is a characteristic of out-of-band management?

A. Dependent upon OS
B. Less secure
C. Dedicated device
D. Agent based

正解：C

質問 # 50
Starting from which Dell EMC PowerEdge server hardware generation is the Micro SD card in the IDSDM/vFlash module supported?

A. 12G
B. 14G
C. 13G
D. 11G

正解：C

質問 # 51
You must configure a BOSS card with 2 x 120GB drives for a Dell EMC PowerEdge server. What is the only supported mode?

A. RAID 1
B. Non-RAID Mirroring
C. RAID 5
D. RAID 0

正解：A

質問 # 52
What happened on April 30, 2019?

Note: It is necessary to dose (x) the simulator window before you can select a response to this question.