まもなく無料セール終了！リアルDES-4122のPDF解答で合格せよ [2023年12月11日]
最新の2023年12月試験DES-4122問題集合格できる認証試験合格させます
質問 # 32
Which rear disk drive option is available in a Dell EMC PowerEdge R740xd server?
- A. 6x2 5" drives
- B. 2x3.5" drives
- C. 4x 3.5" drives
- D. 8x2 5" drives
正解：B
質問 # 33
For security reasons, the Dell EMC PowerEdge server power button must be disabled. Use the System Setup Utility in the simulator to disable the power button. When you have finished using the simulator, click Next.
正解：
解説：
Send us your suggestion for this simulation task.
質問 # 34
What is the drive characteristic of a BOSS M.2 drive in a Dell EMC PowerEdge server?
- A. Single-level cell
- B. Read Intensive
- C. Write Intensive
- D. Quad-level cell
正解：B
質問 # 35
How can the ePSA be accessed?
- A. Lifecycle Controller
- B. OMSA
- C. iDRAC
- D. VMware vSphere plug-in
正解：C
質問 # 36
What is the drive characteristic of a BOSS M.2 drive in a Dell EMC PowerEdge server?
- A. Single-level cell
- B. Read Intensive
- C. Write Intensive
- D. Quad-level cell
正解：A
質問 # 37
What are key values related to systems management when deploying OpenManage Enterprise wit Dell EMC PowerEdge servers?
- A. Simplify
Fee-based license Agent-free Management Secure - B. Simplify
Unify
Automate
Secure - C. Simplify
Basic Hardware Element Management
Agent-free Management
Fee-based license - D. Automate
Basic Hardware Element Management
Agent-free Management
Simple and effective
正解：B
質問 # 38
What is a requirement to operate GPUs in a Dell EMC PowerEdge R740 server?
- A. All GPU cards must be installed at the same time
- B. All GPU cards must be installed on the same riser card.
- C. All GPU cards must be of the same type and model
- D. All GPU cards must be of the same type but can be a different model
正解：C
質問 # 39
How can a technician know whether IDRAC9 System Lockdown mode is enabled?
- A. Lockdown activation message in red box in the iDRAC web GUI Access to LCC is disabled when the server boots
- B. Lockdown activation message in red box in the iDRAC web GUI Access to LCC requires a password when the server boots
- C. Lockdown activation message in yellow box in the iDRAC web GUI Access to LCC requires a password when the server boots
- D. Lockdown activation message in yellow box in the iDRAC web GUI Access to LCC is disabled when the server boots
正解：D
質問 # 40
A technician installs eight servers into a fully operational rack with top of rack switch Each server has a quad
1Gb NIC and redundant power supplies The company uses iDRAC in shared LOM mode with LOM1 as the selected NIC What should the technician do to verify iDRAC connectivity on each server?
- A. iDRAC Datacenter license is installed.
- B. iDRAC dedicated NIC port is cabled and the link light is green
- C. iDRAC Enterprise license is installed
- D. Ethernet port LOM1 is cabled and the link light is green.
正解：B
質問 # 41
You are creating a new RAID 5 storage pool on a Dell EMC PowerEdge server based on 30 x 1TB drives Which PERC model best supports this configuration?
- A. H740P
- B. S140
- C. H330
- D. H740T
正解：B
質問 # 42
A technician is sent on-site to troubleshoot a server that produced an error message during the most recent POST, but then completed the POST and booted to the operating system. The user cannot remember the specific error and no entry was made in the error log relating to this error.
How can the technician find out what the error message was?
- A. Access the iDRAC and view the last boot cycle video capture entry
- B. Reload the BIOS firmware
- C. Access the Lifecycle Controller and view the last boot cycle video capture entry
- D. Export the Server profile and analyze for any POST errors
正解：A
質問 # 43
What is the purpose of the Silicon-Based Hardware Root of Trust feature in Dell EMC PowerEdge 14G servers?
- A. Ensures that the server has a valid Service Tag number
- B. Ensures that the server boots only when connected to a verified network
- C. Ensures that no unauthorized BIOS or firmware codes are run
- D. Ensures that the installed operating system is authentic
正解：C
質問 # 44
An engineer needs to upgrade a Dell EMC PowerEdge R440 server from a single PSU to dual PSU configuration. There are unused PSU modules from PowerEdge R430 and R420 servers available, and they have the same wattage ratings.
What should the engineer do to complete the task?
- A. Add the PowerEdge R430 PSU modules to the PowerEdge R440
- B. Order a new PSU specific to the existing PowerEdge R440
- C. Configure the PowerEdge R440 PSU with 1+1 configuration
- D. Add the PowerEdge R420 PSU modules to the PowerEdge R440
正解：D
質問 # 45
What is a characteristic of out-of-band management?
- A. Less secure
- B. Agent based
- C. Dedicated device
- D. Dependent upon OS
正解：C
質問 # 46
An engineer needs to install an additional PSU on an existing, single PSU Dell EMC PowerEdge R740. They complete the initial installation and cabling procedures. They connect an AC cable and the power distribution unit produces normal AC output. The engineer checks power management and sees that the new PSU is in the Failed state.
What task should be completed to troubleshoot this issue?
- A. Confirm the System Input Power CAP is not set to Low
- B. Set the PSU AC redundancy to 1+0
- C. Verify the new PSU is the same type and wattage rating
- D. Set the PSU AC redundancy to 1+1
正解：C
質問 # 47
An engineer is checking a newly delivered Dell EMC PowerEdge R640 server that will be deployed for a new database environment The inventory consists of:
The server power configuration will be set for gnd redundancy The management switch is 1000 Base-T and the top of rack switches 10Gb What additional component(s) is needed for this configuration?
- A. C20 to C21, PDU style, 250 V, 16 Amp, 3 5 meters power cord - qty 2
- B. Hot-plug power supply, 750 W - qty 1
- C. Hot-plug power supply, 1100W - qty 1
- D. Dell Networking, cable, 40GbE (QSFP+) to 4 x 10GbE SFP+ passive copper breakout cable, 3 meters - qty 2
正解：A
質問 # 48
An engineer wants to fully leverage Microsoft Windows Server 2016 for TPM-based guarded host deployment of a 14G server Which BIOS settings need to be used for installing the Windows server?
A)
B)
D)
- A. Option C
- B. Option D
- C. Option B
- D. Option A
正解：A
質問 # 49
A Dell EMC PowerEdge server has been updated with an LCC and iDRAC DUP to the latest firmware when performing a firmware rollback?
- A. The LCC can be rolled back; the iDRAC cannot be rolled back
- B. Both the iDRAC and the LCC can be rolled back
- C. The iDRAC can be rolled back; the LCC cannot be rolled back
- D. The iDRAC cannot be rolled back and the LCC cannot be rolled back
正解：A
質問 # 50
Match each status LED indicator on the Dell EMC 14G PowerEdge server with its corresponding condition.
正解：
解説：
質問 # 51
When does a customer require the Service Tag of the Dell EMC PowerEdge server?
- A. Activating the OS
- B. First time logging in to iDRAC
- C. First time accessing the BIOS
- D. Obtaining warranty information
正解：C
質問 # 52
What must be done before upgrading OMSA from the 32-bit to the 64-bit version?
- A. Disable UAC
- B. Back up the configuration
- C. Uninstall the earlier version
- D. Save the license file
正解：C
質問 # 53
A technician working with a Dell EMC PowerEdge 1 take corrective action?
- A. Check the System Event Log
Check PSU LED
Reseat the PSU - B. Check the System Event Log
Check PSU LED
Do a virtual reseat of the iDRAC - C. Check the LCC Log
Check PSU LED
Reseat the CPU - D. Check the LCC Log
Check PSU LED
Reseat the PSU
正解：B
質問 # 54
Starting from which Dell EMC PowerEdge server hardware generation is the Micro SD card in the IDSDM/vFlash module supported?
- A. 13G
- B. 11G
- C. 12G
- D. 14G
正解：A
質問 # 55
A Dell EMC PowerEdge server logs the following CPU Machine Check error CPU1 IERR What action might solve the problem?
- A. Swap the PERC controller
- B. Update the Intel driver
- C. Reseat the IDSDM
- D. Remove flea power
正解：B
質問 # 56
......
EMC DES-4122 の認定を取得するためには、複数の選択肢の問題と実践的なシミュレーションを含む厳しい試験に合格する必要があります。この試験は、候補者が様々なシナリオや環境で PowerEdge サーバーを実装する能力をテストするよう設計されています。
DES-4122問題集が合格させる、一日でDCS-IE試験合格：https://jp.fast2test.com/DES-4122-premium-file.html
最新でリアルなEMC DES-4122試験問題集解答：https://drive.google.com/open?id=1HSdWQpNPRtfzuznkgOBXMB3Y5aEIvaIM