ベストな準備プランCMRP試験2024年最新のCMRP Certification無制限150問題 [Q47-Q63]

ベストな準備プランCMRP試験2024年最新のCMRP Certification無制限150問題

注目すべき時短になるCMRPオールインワン試験ガイド

質問 # 47
In developing a business plan for a maintenance and reliability improvement initiative it is important that the:

A. plant manager leads the planning effort to develop the business plan so that ithas credibility and gains buy-in.
B. business plan is a formal document that is linked to the corporate business objectives and operating goals and other initiatives.
C. business plan is entered into the Computerized Maintenance Management System and understood by the controller.
D. business plan outlines a payback on investment of between 1- 1/2 years and2- 1/4 years, with metrics totrack.

正解：B

質問 # 48
Which of the following failures, when avoided,is considered a"best practice" for industrialmaintenance?

A. Manufacturer induced
B. Design induced
C. Self induced
D. Machine induced

正解：C

質問 # 49
Process measures are leading indicators that offer an indication of task performance with a lead time to manage for successful results. All of the following are examples of leading indicators except:

A. Asset Availability.
B. % rework.
C. % planned maintenance.
D. planner to craft workers ratio.

正解：A

質問 # 50
What is the first method that should be considered for controlling noise exposure?

A. reduction of noise transmitted
B. develop noise transmission standards in equipment specifications
C. reduction of noise at its source
D. personal protective equipment

正解：B

質問 # 51
Total quality management focuses all employees on producing products that meet customer needs. This is done by:

A. Sharing information with all levels in the organization
B. Balancing the needs of all stakeholders in the organization
C. Developing a high level of expertise in all employees
D. Eliminating processes that waste time and materials

正解：C

質問 # 52
Which one of the followingwork order characteristics addthe most value to the business?

A. Closed in a timely manner
B. Correct charge codes used
C. Work completed is well-documented
D. Proper authorization

正解：C

質問 # 53
Shutdown Work Ratio is defined as the:

A. the amount of planned labor hours for key resource person(s) relative to actual labor hours worked during an outage.
B. the amount of estimated labor hours that a maintenance team can devote to an outage relative to the total downtime scheduled.
C. amount of work in manhours that a maintenance team actually achieved in a shutdown relative to the amount of work it could achieve.
D. amount of available work time key resource person(s) can work relative to the actual calendar time of the shutdown.

正解：A

質問 # 54
What is a high level metric used to evaluate the overall effectiveness of a Safety Program?

A. Number of job hazard analyses completed
B. Near miss report submissions
C. Lost time injury frequency
D. First aid case frequency

正解：C

質問 # 55
The maintenance manager of a bearing manufacturer has asked you to calculate the reorder point of a spare part item. She has provided you with the following information to facilitate your calculations. The cost of the spare parties$100. The cost of earning inventory is 20% of the cost of the part. The cost of placing an order is$40 for which the annual demand is 100,000 units. The average tad-time for replenishment is two weeks and the buffer stock of 500 units S desired and the average inventory is 100 units per week. What is the reorder point in units for this spare part?

A. 600 units
B. 1200 units
C. 707 units
D. 350 units
E. 700 units

正解：E

質問 # 56
Motor current analysis reveals an unbalanced motor current in excess of 40% when the motor is loaded to over
70% of its nameplate full bad ampere rating. What should you suspect and or what should you do?

A. Order more on-line tests to confirm the problem, allowing production to continue as long as possible.
B. Do nothing. Current unbalance is normal in a motor that is not fully loaded.
C. Atthe first opportunity, shut down the motor and have motor circuit analysis performed to locate the cause so it can be corrected.
D. Order the motor to be removed from service immediately, since failure due to overheated winding insulation is imminent.

正解：A

質問 # 57
When initiating change to an existing process or program,the best practice is to:

A. Issue a directive on the revised process or program, start it and require compliance by a specific date, then begin training as soon as possible thereafter.
B. Involve key personnel in planning, development of new process or program directives), train affected personnel, and then implement before a specified compliance date.
C. Make organizational meetings to plan, train for, and implement change mandatory, but make participation voluntary to avoid alienating employees who dislike change.
D. Announce the new process or program, issue a draft directive for review and comment then issue the final with a specific compliance date, and employee review comments and recommendations incorporated to the maximum extent possible to get "buy-in."

正解：B

質問 # 58
Examples of workplace ethics issues include everything except:

A. workplace privacy.
B. conflicts of interest.
C. pay raises.
D. whistle-blowing.

正解：C

質問 # 59
Which of the following best measures the effectiveness of the Maintenance and Reliability workforce?

A. A set of key performance indicators
B. Man-hours of Maintenance and Reliability work performed by production
C. The amount of backlog work
D. Trends in the Maintenance and Reliability budget

正解：A

質問 # 60
Percent overtime maintenance labor hours is:

A. Total overtime labor hours, divided by the total scheduled maintenance labor hours, expressed as a percentage.
B. Total overtime labor hours, divided by the total maintenance labor hours to maintain assets, expressed as a percentage.
C. Scheduled overtime maintenance labor hours used to maintain assets, divided by scheduled maintenance labor hours to maintain assets, expressed as a percentage.
D. Overtime maintenance labor hours used to maintain assets, divided by the total maintenance labor hours to maintain assets, expressed as a percentage.

正解：D

質問 # 61
You are the maintenance manager for a manufacturing plant (facility) that runs 24 hours a day, seven days a week. The product is selling well. The business is healthy. Which consideration will bring the most value to your business when planning your next major shutdown of your operating area?

A. Keeping the cost within budget
B. Delay the shutdown until an equipment failure forces the plant (facility) down
C. Make full utilization of manpower during the shutdown period
D. Limit the work to only jobs that require a shutdown to perform

正解：D

質問 # 62
Which one of the following work order characteristics add the most value to the business?