準備できるD-PEMX-DY-23問題解答は無料更新されて100%試験合格保証 [2025]
問題集リアルなEMC D-PEMX-DY-23試験問題 [更新されたのは2025年]
質問 # 77
A customer must assign specific VLANs to each NIC partition configured.
Which NIC supports that feature?
- A. Mellanox ConnectX-4
- B. QLogic 41232
- C. Broadcom 57504
- D. Intel XXV710
正解：C
質問 # 78
A customer is implementing a clustered three-chassis solution.
Which two components are required?
(Select 2)
- A. MXG610s
- B. MX7116n
- C. MX9116n
- D. Pass-Through module
正解：B、C
質問 # 79
What is the port configuration of the MX9116n FSE?
- A. 32 internal 25 GbE server facing ports
10 QSFP28-DD ports
4 100 GbE QSFP28 uplink ports
2 100 GbE QSFP28 unified ports - B. 16 internal 25 GbE server facing ports
10 QSFP28-DD ports
4 100 GbE QSFP28 uplink ports
2 100 GbE QSFP28 unified ports - C. 32 internal 25 GbE server facing ports
12 QSFP28-DD ports
2 100 GbE QSFP28 uplink ports
2 100 GbE QSFP28 unified ports - D. 16 internal 25 GbE server facing ports
12 QSFP28-DD ports
2 100 GbE QSFP28 uplink ports
2 100 GbE QSFP28 unified ports
正解：D
質問 # 80
An administrator needs to start collecting detailed data points on the PowerEdge MX7000 power usage.
What is the minimum requirement?
- A. OME-M Advanced
- B. OME-M Basic
- C. OpenManage Enterprise
- D. OpenManage Essentials
正解：A
質問 # 81
What configuration is supported for a fully populated MX740c compute sled?
- A. 1 Fabric A mezz card 1 Fabric B mezz card
1 Fabric C mini-mezz card - B. 2 Fabric A mezz cards 2 Fabric B mezz cards
2 Fabric C mini-mezz cards - C. 1 Fabric A mezz card
1 Fabric B mezz card with Fabric C being integrated into the system board - D. 1 Fabric B mezz card
1 Fabric C mezz card with Fabric A being integrated into the system board
正解：A
質問 # 82
What is a valid option when resetting iDRAC to factory defaults?
- A. Preserve identity and network settings
- B. Preserve network and storage settings
- C. Preserve user and network settings
- D. Preserve storage and user settings
正解：C
質問 # 83
An administrator is configuring a fully populated MX5016s storage sled to be accessed by four MX740c compute sleds. Each compute sled has an H745P Jumbo PERC installed. The disks in the storage sled are evenly distributed across all compute sleds using a Drive-Assigned storage configuration.
What is the maximum number of disks that each compute sled can detect from the MX5016s?
- A. 0
- B. 1
- C. 2
- D. 3
正解：B
質問 # 84
Where in the OME-M Web interface can the Chassis Deployment Wizard be found?
- A. Configuration > Deploy > Chassis Deployment Wizard
- B. Home > Settings > Chassis Deployment Wizard
- C. Hardware > Initial Configuration
- D. Home > Configure > Initial Configuration
正解：D
質問 # 85
Which uplink configuration combination of the Top of the Rack Switch and the MX7000 Management Module is supported?
- A. 100 Mbps (Auto negotiation OFF) and Auto negotiation ON
- B. 100 Mbps (Auto negotiation OFF) and Auto negotiation OFF
- C. 100 Mbps (Auto negotiation ON) and Auto negotiation OFF
正解：B
質問 # 86
What are two requirements to achieve 100 GbE network speeds for a compute sled?
(Select 2)
- A. MX9116n
- B. Dual-port NIC
- C. MX7116n
- D. Quad-port NIC
- E. Z9432F-ON
正解：A、D
質問 # 87
What are the components of the control panel of a PowerEdge MX750c sled?
- A. Power button
USB 3.0 port
iDRAC micro port
iDRAC direct status LED - B. Power button
USB 2.0 port
iDRAC micro port
iDRAC direct status LED - C. Power button
USB 3.0 port
micro DisplayPort
iDRAC direct status LED - D. Power button
USB 2.0 port
micro DisplayPort
iDRAC direct status LED
正解：A
質問 # 88
A customer wants to change the switch operating mode from SmartFabric mode to Full Switch mode.
After deleting the fabric in OME-M, what configuration is retained on the switch?
- A. admin password, hostname, management IP Address, and the VLT domain configuration
- B. admin password, hostname, management IP Address, and all port breakout configuration
- C. admin password, hostname, management IP Address, and the VLAN database
- D. admin password, hostname, and management IP Address
正解：D
質問 # 89
On which generation of server was the BOSS-N1 controller introduced?
- A. 16G
- B. 15G
- C. 14G
正解：A
質問 # 90
Which three components store an MX7000 chassis service tag and MAC address configuration?
(Select 3)
- A. Fabric Switching Engine
- B. Right Control Panel
- C. Chassis Luggage Tag
- D. Management Module
- E. LCD Panel
正解：B、D、E
質問 # 91
Which feature requires an iDRAC Enterprise license for an MX sled?
- A. Last Crash Screen
- B. Storage Management
- C. iDRAC Service Module
- D. Group Manager
正解：D
質問 # 92
What compute sled model best supports the following requirements?
4 Node Database Cluster Heavy transactional workload 16 Processors
24 TB of DDR4 Memory
40 TB of Disk Space Maximum of 200,000 IOPS
- A. 4 x MX840C 16 Processors
24 TB of DDR4 Memory
40 TB of Disk Space based on SAS SSD Drives - B. 8 x MX750C 16 Processors
16 TB of DDR4 Memory
45 TB of Disk Space based on NVMe Drives - C. 4 x MX840C 16 Processors
24 TB of DDR4 Memory
40 TB of Disk Space based on NVMe Drives - D. 8 x MX740C 16 Processors
16 TB of DDR4 Memory
50 TB of Disk Space based on SAS SSD Drives
正解：C
質問 # 93
Which command(s) is supported in the current PowerEdge MX Redfish implementation?
- A. GET and DELETE
- B. PUT only
- C. HEAD and PUT
- D. PUT and DELETE
正解：A
質問 # 94
Where is a valid storage location for extracting the full MX7000 chassis logs package?
- A. CSV
- B. VMFS
- C. CIFS
- D. FTP
正解：C
質問 # 95
A data center team is working on a solution to monitor and manage data center devices from anywhere.
Which feature can be configured to perform these tasks?
- A. QAT
- B. OME-M
- C. OMM
- D. OIDC
正解：C
質問 # 96
After a main board replacement, the easy restore process was not successful. A system administrator is not able to launch the Virtual Console.
What is the cause of this issue?
- A. Java is not installed.
- B. ActiveX is not installed.
- C. Enterprise license is not installed.
- D. KVM is not present.
正解：C
質問 # 97
What is the port configuration of an MX5108n switch?
- A. 16 x internal 25GbE ports
4 x 40GbE QSFP+ ports
2 x 100GbE QSFP28 ports
1 x 10GbE RJ45 Base-T port - B. 8 x internal 25GbE ports
2 x 40GbE QSFP+ ports
1 x 100GbE QSFP28 port
4 x 10GbE RJ45 Base-T ports - C. 16 x internal 25GbE ports
1 x 40GbE QSFP+ port
2 x 100GbE QSFP28 ports
4 x 10GbE RJ45 Base-T ports - D. 8 x internal 25GbE ports
1 x 40GbE QSFP+ port
2 x 100GbE QSFP28 ports
4 x 10GbE RJ45 Base-T ports
正解：D
質問 # 98
......
D-PEMX-DY-23試験問題集、D-PEMX-DY-23練習テスト問題：https://jp.fast2test.com/D-PEMX-DY-23-premium-file.html