Nutanix NCP-MCI-6.5問題集で必ず試験合格させる [Q29-Q46]

Nutanix NCP-MCI-6.5問題集で必ず試験合格させる

NCP-MCI-6.5試験問題（更新されたのは2023年）100%リアル問題解答

Nutanix NCP-MCI-6.5 認定試験は、マルチクラウドインフラストラクチャ管理の分野でキャリアを進めたい IT プロフェッショナルにとって貴重な資格です。この認定は、マルチクラウド環境での Nutanix ソリューションの管理と展開に高度な専門知識を持っていることを示し、認定されたプロフェッショナルは、マルチクラウド戦略を採用する組織から非常に求められます。さらに、この認定は世界的に認知されており、様々な産業で IT プロフェッショナルに新しい機会を開くことができます。

質問 # 29
How should an administrator enable secure access to Volumes using a password?

A. CHAP
B. iSER
C. LDAP
D. SAML

正解：A

解説：
Explanation
https://portal.nutanix.com/page/documents/details/?targetId=Web-Console-Guide-Prism-v50:wc-block-services- Provision storage on the Nutanix cluster by creating a volume group. Create a client whitelist to enable access to the volume group by using the IP addresses or client initiator IQNs in a whitelist (as part of the volume group configuration). Create a secret for the volume group if you are using CHAP authentication.

質問 # 30
An administrator needs to configure Prism to send encrypted messages to a set of recipients.
Which setting must be applied?

A. Install SSL certificates on Prism Central
B. Configure Prism Central to use Cluster Lockdown
C. Use SMTP Port 25
D. Set SMTP Security Mode to STARTTLS

正解：D

解説：
The best way for the administrator to configure Prism to send encrypted messages to a set of recipients is to set the SMTP Security Mode to STARTTLS. This will ensure that all messages sent over SMTP are encrypted and secure. Additionally, the administrator should consider installing SSL certificates on Prism Central to ensure that the messages are being sent securely. Finally, the administrator should consider configuring Prism Central to use Cluster Lockdown, which will help ensure that the messages are only sent to the intended recipients.

質問 # 31
After configuring modules for a Remote Syslog Server, the settings are as shown. The administrator notices that even though the level parameter is set to EMERGENCY, that all monitor logs are being sent.
What is the likely cause of this issue?

A. The true setting for Include Monitor Logs sends all monitor logs regardless of the level.
B. A second rsyslog server is configured to send all monitor logs.
C. Having the Module Name set to STARGATE sends all monitor logs regardless of the level.
D. A Log Level of EMERGENCY includes all monitor logs.

正解：A

解説：
This means that the rsyslog server is configured to include all monitor logs in addition to the messages with EMERGENCY level.
It has a level parameter that specifies the severity of messages to be logged2. The level parameter can have one of eight values: EMERG (emergency), ALERT, CRIT (critical), ERR (error), WARNING, NOTICE, INFO (informational), and DEBUG2.

質問 # 32
In which two scenarios is Native Key Management Server supported? (Choose two)

A. Hyper-V and AHV mixed cluster.
B. KVM and AHV mixed cluster.
C. ESXi and AHV mixed cluster.
D. XenServer and AHV mixed cluster.

正解：A、C

質問 # 33
A VM in a 12-node Nutanix cluster is hosting an application that has specific Physical GPU requirements.
Only three nodes in the cluster meet this requirement.
The administrator wants to allow a general workload to be distributed across all nodes in the cluster and must make sure that the node hosting the VM meets its requirements.
How should the administrator perform this task?

A. Over-Provision the application VM with additional virtual GPUs.
B. Configure anti-affinity rules between the application VM and the other VMs running on the cluster.
C. Configure VM-Host affinity for the nodes that meet the application's GPU requirement.
D. Create a sperate three-node cluster using the nodes that meet the requirement.

正解：C

質問 # 34
An administrator wants to receive an environment summary report when a host failure occurs.
Which action would address the administrator's need?

A. Enable App Discovery
B. Create a playbook
C. Edit report schedule
D. Configure an alert policy

正解：D

解説：
Explanation
An alert policy can be configured to send out an environment summary report when a host failure occurs. This can be done by creating a policy that triggers an alert whenever a host fails and then configuring the policy to send out a report that provides a summary of the environment in which the failure occurred. This will allow the administrator to quickly get a view of the environment after a failure occurs, allowing them to take the necessary steps to address the issue.

質問 # 35
Which AOS process determine if an I/O from a user will be written to OpLog or to an Extent Store?

A. Zeus
B. Stargate
C. Cassandara
D. Curtor

正解：B

解説：
Stargate is the AOS process that handles all I/O operations for the cluster. It is responsible for determining whether an I/O from a user will be written to the OpLog or to the Extent Store, based on the type and size of the I/O. Stargate also performs data tiering, compression, deduplication, and erasure coding1. Stargate runs on every CVM and communicates with other Stargates to ensure data locality and redundancy2.

質問 # 36
Prism Central will be installed manually on an AHV cluster.
Which three disk images must be downloaded from the portal for the Prism Central VM? (Choose three.)

A. data
B. boot
C. tmp
D. home
E. var

正解：A、B、D

解説：
Explanation
https://portal.nutanix.com/page/documents/details?targetId=Prism-Central-Guide-Prism-v5_10:mul-pc-install-sc

質問 # 37
After configuring modules for a Remote Syslog Server, the settings are as shown. The administrator notices that even though the level parameter is set to EMERGENCY, that all monitor logs are being sent.
What is the likely cause of this issue?

A. A Log Level of EMERGENCY includes all monitor logs.
B. A second rsyslog server is configured to send all monitor logs.
C. Having the Module Name set to STARGATE sends all monitor logs regardless of the level.
D. The true setting for Include Monitor Logs sends all monitor logs regardless of the level.

正解：A

質問 # 38
An Administrator is working on a one-node ROBO cluster configurations
Which statement is true for this configuration?

A. witness vm should be 8vcp and 20gb ram
B. the minimum RPO 8 hours required
C. Witness vm required to break cluster quoram
D. Supported hardware is NX-1175-G5 and G6

正解：D

質問 # 39
A user running a Computer Aided Design (CAD) application is complaining about slow response time within the VM, particular when moving windows or rendering images.
Which VM metric will guide the administrator toward diagnosing the problem?

A. GPU Usage
B. Hypervisor Memory Usage (%)
C. Storage Controller Latency
D. Swap in Rate

正解：A

質問 # 40
An administrator is configuring data protection and DR for a multi-tier application. All VMs must be protected at the same time.
What must the administrator do to meet this requirement?

A. Create a protection domain for the application and select auto-protect related entities
B. Create a protection domain for each VM with identical schedules
C. Create a consistency group for the application and place all VMs in it
D. Create a consistency group for each VM with identical schedules

正解：C

解説：
According to the web search results, a consistency group is a group of related applications or services that must be recovered together in order to work properly, and this means more than being recovered at the same time67. They also typically need to be recovered to the same point in time6. Therefore, to meet the requirement of protecting all VMs of a multi-tier application at the same time, the administrator must create a consistency group for the application and place all VMs in it8. This way, the administrator can apply data protection policies and schedules to the entire consistency group as a single unit8.

質問 # 41
A newly-hired Nutanix administrator was tasked by the CIO to create a single VM on a test network. The network administrator stated that a native VLAN was used on the Cisco TOR switches with the following parameters:
IP address:172,16.1.2
Network Mask: 255.255.255.0
Default gateway: 172.16.1.1
VLAN:1
The same parameters were used to create a network profile on Nutanix, but the when the VM was on ...
What should the Nutanix administrator do to fix this issue?

A. Enable IPv6 on the VM.
B. Change VLAN field from vlan. 1 to vlan.0.
C. Nutanix removed support for native VLAN.
D. Use DHCP as opposed to static IP

正解：B

解説：
A native VLAN is a VLAN that is assigned to untagged traffic on a trunk port of a switch. A trunk port can carry traffic from multiple VLANs, but it needs to have a native VLAN to handle traffic that does not have a VLAN tag. The native VLAN is usually VLAN 1 by default on most switches, but it can be changed to any other VLAN number2. When creating a network profile on Nutanix, the administrator needs to specify the VLAN ID that matches the VLAN configuration on the physical switch. However, if the network profile uses the same VLAN ID as the native VLAN on the switch, it will cause network connectivity issues for the VMs connected to that network profile. This is because Nutanix AHV uses 802.1Q tagging for all network traffic, including traffic in the native VLAN. The switch will expect untagged traffic in the native VLAN and will drop any tagged traffic in that VLAN3. To fix this issue, the administrator needs to change the VLAN field from vlan. 1 to vlan. 0 in the network profile on Nutanix. This will tell Nutanix AHV to send untagged traffic for that network profile and match the native VLAN configuration on the switch4.

質問 # 42
Microsegmentation was recently enabled in a Nutanix environment. The administrator wants to leverage Prism Central to create a policy that will block all traffic regardless of direction, between two groups of VMs identified by their category.
Which policy should be used to meet this requirement?

A. An Application Security Policy
B. A Whitelist-Based Policy
C. An Isolation Environment Policy
D. A Quarantine Policy

正解：C

質問 # 43
An administrator is implementing a VDI solution. The workload will be a series of persistent desktops in a dedicated storage container within a four-node cluster Storage optimizations should be set on the dedicated storage container to give optimal performance including during a node failure event Which storage optimizations should the administrator set to meet the requirements?

A. Deduplication and Erasure Coding
B. Compression Deduplication and Erasure Coding
C. Compressoion and Deduplication
D. Compression only

正解：C

質問 # 44
How should an administrator configure a custom alert for a specific VM in Prism?

A. Modify an existing alert to only alert on the specific VM.
B. Modify VM settings to add the custom alert.
C. Modify the alerts to add a new custom alert policy.
D. Modify node settings to add the custom alert.

正解：C

解説：
https://portal.nutanix.com/page/documents/details/?targetId=Prism-Central-Guide-Prism-v510:mul-alert-policies-user-defined-configure-pc-c.html

質問 # 45
An administrator logs in to Prism Element goes to the Network view, and sees the output shown in the exhibit.

Which three steps must the administrator take to increase throughput to the host? (Choose three.)