2025年最新のNutanix NCP-MCI-6.5試験問題には180問があります
無料で使えるNCP-MCI-6.5別格な問題集をダウンロード2025年03月12日に更新された180問があります
この試験は、仮想化とクラウドコンピューティングの経験を持つ IT プロフェッショナルを対象としています。システム管理者、クラウドアーキテクト、そして彼らの組織で Nutanix ソリューションを管理および展開する責任を持つ IT マネージャーに最適です。この試験は、Nutanix テクノロジーの包括的な理解を提供し、マルチクラウドインフラストラクチャを管理するために必要なスキルを開発するのに役立ちます。
Nutanix NCP-MCI-6.5（Nutanix Certified Professional - Multicloud Infrastructure（NCP-MCI）v6.5）認定試験は、Nutanixソリューションの管理と展開の経験を持つITプロフェッショナル向けに設計された包括的な認定プログラムです。この認定試験は、Nutanixの最新バージョンであるマルチクラウドインフラストラクチャプラットフォームのバージョン6.5に焦点を当てています。
質問 # 26
Which two capabilities does IPAM provide in a Nutanix networking configuration? (Choose two.)
- A. Allows proxy server settings to be set up for a defined network
- B. Configures a VLAN with an IP subnet and assigns a group of IP addresses
- C. Allows AHV to assign IP addresses automatically to VMs using DHCP
- D. Configures firewall rules to prevent or allow certain TCP/IP traffic
正解：B、C
質問 # 27
What is the minimum time a newly created Deduplication storage policy takes to apply to the VMs in the container?
- A. 60 minutes
- B. 5 Minutes
- C. 10 minutes
- D. 30 minutes
正解：A
解説：
Deduplication is a feature that reduces space usage by consolidating duplicate data blocks on Nutanix storage. Deduplication can be enabled on a storage container for either cache or capacity, or both. Cache deduplication is performed on the data in memory and SSD, while capacity deduplication is performed on the data in HDD. Capacity deduplication is not enabled by default and is available if you have purchased a Pro or higher license2. When you enable capacity deduplication on a storage container, it takes effect after 60 minutes3. This delay allows the system to identify the best candidates for deduplication and avoid unnecessary overhead.
質問 # 28
Refer to the exhibit.
The Linux Admin role has been created to manage only Linux VMs in the environment. However, the Admin1 user does not have access to all Linux VMs.
What step should be taken to grant the proper access?
- A. Add the hosts to the entities KM for the role.
- B. Add the role to the Linux images.
- C. Grant the admin1 user the viewer role (or the cluster.
- D. Add the proper category to each Linux VM.
正解：D
解説：
According to the Nutanix Prism Central Guide, role-based access control (RBAC) in Prism Central allows you to create custom roles and assign them to users or groups based on the categories of the entities they need to manage1. Categories are key-value pairs that you can assign to entities such as VMs, hosts, clusters, images, etc. to group them logically2. For example, you can create a category key called "OS" and assign values such as "Linux" or "Windows" to different VMs based on their operating system.
In the exhibit, the Linux Admin role has been created with the following settings:
* The role has the "VM Admin" permission, which allows the user to perform all actions on VMs3.
* The role has been assigned to the admin1 user.
* The role has been scoped to the entities that have the category key "OS" and the value "Linux".
However, the admin1 user does not have access to all Linux VMs in the environment. This means that some of the Linux VMs do not have the proper category assigned to them. To grant the proper access, the administrator should add the category key "OS" and the value "Linux" to each Linux VM that needs to be managed by the Linux Admin role. This can be done either individually or in bulk through Prism Central4. Once the categories are added, the admin1 user will be able to see and manage all Linux VMs in the environment.
質問 # 29
What does Nutanix recommend when setting up the node networkring?
- A. Combine NIC models from different vendors in the same bond.
- B. Combine NIC models from different vendors in the same bond.
- C. Include NIC models from different vendors in the same bond
- D. Include at least two physically interfaces in every bond.
正解：D
質問 # 30
Which Nutanix service control ncli, the HTML5 UI, and Rest API?
- A. Cassandra
- B. Zookeeper
- C. Chronos
- D. Prism
正解：D
解説：
Prism is the central service control used by Nutanix to manage the clusters. It provides a unified view of the entire system, and it is used to control the HTML5 UI, the nCLI, and the REST API. Prism is used to manage the resources of the system, such as the nodes, storage, and networks, as well as to monitor the performance of the system and the applications running on it.
https://www.nutanixbible.com/2f-book-of-basics-cluster-components.html
Prism
Key Role: UI and API
* Prism is the management gateway for components and administrators to configure and monitor the Nutanix cluster. This includes Ncli, the HTML5 UI, and REST API.
* Prism runs on every node in the cluster and uses an elected leader like all components in the cluster. All requests are forwarded to the leader using Linux Iptables. This allows access to PRISM using any CVM Ip address.
* Prism communicates with Zeus for cluster configuration data and Cassandra for statistics to present to the user. It also communicates with the ESXi hosts for VM status and related information These are only some of the essential services that make up the CVM functionality. For more information on all the services and various Nutanix Cluster components, refer to the portal documentation.
質問 # 31
Async DR is configured between two sites. A network outage occurs at the primary site.
Which steps must the administrator perform to bring the VMs back into service at the backup site?
Item instructions: For each procedure, indicate the order in which that procedure must take place to meet the item requirements. Not all procedures are valid. Identify any invalid procedures using the drop-down option.
正解：
解説：
質問 # 32
After running an LCM inventory it is noticed that there are a number of firmware and software updates available. The administrator would like to avoid any host reboots, but would like to apply some of the available updates?
Which two updates can be done while avoiding a host reboot? (Choose two.)
- A. M.2 Drives
- B. AHV
- C. AOS
- D. Data Drives
正解：C、D
質問 # 33
A node with Erasure Coding fails.
What is the impact?
- A. AQS unable to do deduplication during the Erasure Coding failure.
- B. Potentially increased amount of data stored in the SSD tier.
- C. Increased Controller VM CPU Load.
- D. The node stops utilizing Erasure Coding.
正解：C
質問 # 34
Which algorithm do snapshots and clones leverage to maximize efficiency and effectiveness?
- A. Split-mirror
- B. Continuous Data Protection
- C. Redirect-On-Write
- D. Copy-on-Write
正解：C
質問 # 35
The Update Source for LCM has been configured as shown in the exhibit. Inventory is failing consistently.
What is the likely cause of this issue?
- A. The administrator does not have a valid portal account.
- B. Port 433 Is blocked by a firewall.
- C. The license assigned to the cluster has expired.
- D. Port 80 is blocked by a firewall.
正解：B
質問 # 36
When a VM is connected to a Nutanix managed network, when is the IP addressed assigned?
- A. When the guest OS sends a DHCP request.
- B. When the vNIC is created on the VM.
- C. When the VM is powered on.
- D. When the guest OS receives a DHCP acknowledge.
正解：D
質問 # 37
Refer to the exhibit.
An administrator is adding a new node to a cluster. The node has been imaged to the same versions of AHV and AOS that the cluster running, configured with appropriate IP addresses, and br0-up has been configured the same the existing uplink bonds When attempting to add the node to the cluster with the Expand Cluster function in Prism , the cluster is unable to find the new node.
Based on the above output from the new node, what is most likely the cause of this issue?
- A. LACP configuration must be completed after cluster expansion
- B. The ports on the upstream switch are not configured for LACP.
- C. There is a firewall blocking the discovery traffic from the tlu
- D. The existing and the expansion node are on different VLANs.
正解：D
解説：
The correct answer is B. The existing and the expansion node are on different VLANs.
The output shows that the new node has a br0-up bond with four interfaces: eth0, eth1, eth2, and eth3. The bond is configured with LACP active and LACP fallback set to false. This means that the bond will only work if the upstream switch supports LACP and is configured to form an LACP group with the four interfaces.
However, the output also shows that the bond has no IP address assigned to it, which indicates that the bond is not operational. One possible reason for this is that the existing and the expansion node are on different VLANs, and the upstream switch is not configured to allow the VLAN traffic on the LACP group. This would prevent the new node from communicating with the cluster and being discovered by the Expand Cluster function in Prism.
To verify this, the administrator can check the VLAN configuration on the upstream switch and compare it with the existing nodes. Alternatively, the administrator can use the "manage_ovs show_uplinks" command on an existing node and compare the output with the new node. If there is a VLAN mismatch, the administrator can either change the VLAN configuration on the switch or on the new node to match the existing nodes.
質問 # 38
A recently configured cluster is leveraging NearSync with a recovery schedule of 15 minutes. It is noticed that the cluster is consistently transitioning in an Out of NearSyne.
What action should be taken to potentially address this issue?
- A. Change the NearSync schedule to 30 minutes.
- B. Increase network bandwidth
- C. Add a vCPUs to the user VMs.
- D. Configure a secondary schedule in the same Protection Domain.
正解：B
解説：
One of the possible reasons for a cluster to transition out of NearSync is insufficient network bandwidth between the source and target clusters. NearSync requires a minimum network bandwidth of 10 Mbps per VM for replication3. If the network bandwidth is lower than the required amount, the replication of recovery points may take longer than the configured RPO, resulting in an Out of NearSync condition. To address this issue, you can increase the network bandwidth between the clusters or reduce the number of VMs protected by NearSync4.
質問 # 39
An administrator responsible for a VDl environment needs to investigate reports of slow logins. The administrator finds that increasing the number of vCPUs from 2 to 4 will reduce the login times. Production workloads are consuming 75% of the host CPU on the cluster. The administrator increases the vCPU count on all of the VDl VMs.
What are two impacts on the cluster? (Choose two)
- A. Increase CPU ready%
- B. Increasing CPU counts will decrease memory utilization
- C. Increase CPU utilization%
- D. Increase memory utilization%
正解：A、C
解説：
According to the web search results, the two impacts on the cluster that will result from increasing the vCPU count on all of the VDI VMs are:
Increase CPU utilization%: CPU utilization is the percentage of time that a CPU is busy executing instructions5. By increasing the vCPU count on all of the VDI VMs, the administrator will increase the demand for CPU resources on the cluster, which will increase the CPU utilization percentage6.
Increase CPU ready%: CPU ready is the percentage of time that a vCPU is ready to run but is waiting for a physical CPU to become available5. By increasing the vCPU count on all of the VDI VMs, the administrator will increase the contention for physical CPU resources on the cluster, which will increase the CPU ready percentage6. A high CPU ready percentage can indicate performance issues such as latency or slowdowns5.
質問 # 40
In the event of a disk failure, which process will immediately ad automatically scans Cassandra to find all data previously hosted on the failed disk, and all disks in that node?
- A. Curator
- B. Genesis
- C. Stargate
- D. Prism
正解：A
質問 # 41
The Linux administration team has requested access rights to any current or future Linux VM in the environment What entity should be selected when assigning this new role?
- A. Category
- B. Image
- C. Project
- D. AHV Cluster
正解：A
解説：
Categories are key-value pairs that can be used to tag entities such as VMs, images, networks, and projects in Prism Central. Categories can be used to create dynamic groups of entities based on their attributes, and assign roles and permissions to those groups3. In this case, a category such as OS=Linux can be used to group all Linux VMs and grant access rights to the Linux administration team.
質問 # 42
......
Nutanix NCP-MCI-6.5試験実践テスト問題：https://jp.fast2test.com/NCP-MCI-6.5-premium-file.html
最新の認定試験NCP-MCI-6.5問題集-実践テスト問題：https://drive.google.com/open?id=1wR6a48G7ypxcUQQsIlkGz6ju83ZwKUAF