2023年最新のの検証済みNCP-MCI-6.5問題と解答で合格保証 もしくは全額返金
[2023年04月]更新のNCP-MCI-6.5認証と実際の解答はここにあるFast2test
質問 # 102
Which method can be used to migrate a VM configured for UEFI-boot from a Nutanix Hyper-V cluster to AHV?
- A. Cloud Connect
- B. Nutanix Move
- C. Live Migration
- D. Storage vMotion
正解：B
質問 # 103
An administrator wants to receive an environment summary report when a host failure occurs.
Which action would address the administrator's need?
- A. Enable App Discovery
- B. Configure an alert policy
- C. Edit report schedule
- D. Create a playbook
正解：B
解説：
An alert policy can be configured to send out an environment summary report when a host failure occurs. This can be done by creating a policy that triggers an alert whenever a host fails and then configuring the policy to send out a report that provides a summary of the environment in which the failure occurred. This will allow the administrator to quickly get a view of the environment after a failure occurs, allowing them to take the necessary steps to address the issue.
https://www.nutanix.com/support-services/training-certification/certifications/certification-details-nutanix-certified-professional-multicloud-infrastructure-6_5
質問 # 104
An administrator is preparing to deploy a new application on an AHV cluster, Security requirements dictate that all virtual servers supporting this application must be prevented from communicating with unauthorized hosts.
Which option would achieve this goal?
- A. Create a new Application Security Policy restricting communication to the authorized hosts and apply it to the servers in enforce mode.
- B. Create a new VLAN, create a subnet on the cluster with the VLAN tag, deploy servers with vNlCs in the new subnet.
- C. Create a new solation Environment policy apply it to the new servers and all authorized hosts.
- D. Create new' subnet and assign to an existing VPC assign the IP prefix and gateway for the subnet, deploy servers with vNlC5 in the new subnet.
正解：A
解説：
An Application Security Policy is a security feature in Nutanix AHV that can be used to restrict network communication between virtual servers based on a variety of criteria, such as IP address, port, and protocol. By creating a policy that restricts communication to authorized hosts and applying it to the servers in enforce mode, the administrator can prevent unauthorized communication between virtual servers.
https://www.nutanix.com/products/ahv
質問 # 105
What is the function of the virbr0 bridge on AHV?
- A. To carry management and storage communication between user VMs and AHV host.
- B. To carry management and storage communication between user VMs and the CVM.
- C. To carry storage communication between the guest VMs and the CVM
- D. To carry all traffic between the user VMs and the upstream network.
正解：A
解説：
Explanation
http://www.vstellar.com/2019/01/10/ahv-networking-part-1
-basics/#:~:text=AHV%20Network%20Architecture&text=virbr0%20is%20an%20internal%20switch,virbr0)%2
質問 # 106
Which two permission assignment tasks can be accomplished via Prism Element? (Choose two.)
- A. Grant an active directory group permission to perform back operations
- B. Grant a user permission to create and delete snapshots on a specific VM
- C. Grant a user permission to create VMs on a specific storage container
- D. Grant a user permission to view details of all VMs on a specific cluster
正解：B、C
解説：
Explanation
The two permission assignment tasks that can be accomplished via Prism Element are A. Grant a user permission to create VMs on a specific storage container and D. Grant a user permission to create and delete snapshots on a specific VM. With Prism Element, administrators can assign permissions to users and groups on a per-cluster, per-VM, or per-storage container basis. This allows them to control who can access which resources and perform which operations.
質問 # 107
Async DR is configured between two sites. A network outage occurs at the primary site.
Which steps must the administrator perform to bring the VMs back into service at the backup site?
Item instructions: For each procedure, indicate the order in which that procedure must take place to meet the item requirements. Not all procedures are valid. Identify any invalid procedures using the drop-down option.
正解：
解説：
質問 # 108
Refer to Exhibit:
An administrator is trying to put a node into maintenance mode but receives the message shown in the exhibit.
What is a potential reason for this dialog?
- A. LinuxVM1 uses a vDisks stored in a RFI Datastore
- B. LinuxVM1 uses a virtual GPU.
- C. LinuxVM1 uses e vDisks stored in a RF3 Datastore
- D. LinuxVM1 uses a Volume Group
正解：A
解説：
According to the Nutanix Community1, host maintenance mode is used to safely migrate all the user virtual machines (VMs) in the host and make sure no VMs are running on the node. If a VM can't be migrated to another host, you need to shut down the VM for the host to enter into maintenance mode.
According to The Virtualist2, a storage container is a logical segmentation of a storage pool that can be mounted as an NFS datastore on ESXi hosts. You can choose a replication factor (RF) for each storage container, which determines how many copies of data are stored across different nodes.
質問 # 109
Which two access protocols are supported by Files? (Choose two.)
- A. FCOE
- B. SMB
- C. ISCSI
- D. NFS
正解：B、D
質問 # 110
An administrator would like to leverage the Reliable Event Logging Protocol (RELP) with their Remote Syslog Server. After completing the configuration, it is observed that RELP logging is not working as expected.
What is the likely cause of this issue?
- A. The Remote Syslog Server was configure using TCP as the protocol.
- B. The GENESIS was the only one chosen to forward log information.
- C. The cluster does not have RELP installed.
- D. The remote server does not have rsyslog-relp installed.
正解：D
質問 # 111
Microsegmentation was recently enabled in a Nutanix environment. The administrator wants to leverage Prism Central to create a policy that will block all traffic regardless of direction, between two groups of VMs identified by their category.
Which policy should be used to meet this requirement?
- A. An Application Security Policy
- B. A Whitelist-Based Policy
- C. A Quarantine Policy
- D. An Isolation Environment Policy
正解：D
質問 # 112
An administrator has created a Nutanix managed it a VLAN ID of 512.
Several VMs have been created, and the administrator notices that the can successfully communicate with other VMs on that VLAN.
Provided they are on the host, but cannot communicate with VMs that reside on different hosts in the cluster.
What is most likely thee cause of this issue?
- A. There is a firewall rule blockingVLAN512 traffic.
- B. The VLAN was not created on the upstream switches.
- C. The administrator did not create the VLAN on all hosts
- D. VLANS12 is a reserved VLAN ID, and not usable for guest VMs.
正解：B
質問 # 113
When a VM is connected to a Nutanix managed network, when is the IP addressed assigned?
- A. When the VM is powered on.
- B. When the guest OS sends a DHCP request.
- C. When the vNIC is created on the VM.
- D. When the guest OS receives a DHCP acknowledge.
正解：D
質問 # 114
Which component is supported by Prism Central storage policies?
- A. Virtual Machines
- B. Storage Containers
- C. Volume Groups
- D. VM Templates
正解：C
質問 # 115
Upon logging into Prism Central, an administrator notices high cluster latency.
How can the administrator analyze data with the least number of steps or actions?
- A. Modify Data Density in the main Prism Central dashboard.
- B. Click on the chart in the widget to expand the data elements.
- C. Take note of the duster name and create a new Analysis chart.
- D. Click the cluster name in the cluster quick access widget.
正解：B
質問 # 116
An administrator has created a Nutanix managed it a VLAN ID of 512.
Several VMs have been created, and the administrator notices that the can successfully communicate with other VMs on that VLAN.
Provided they are on the host, but cannot communicate with VMs that reside on different hosts in the cluster.
What is most likely thee cause of this issue?
- A. There is a firewall rule blockingVLAN512 traffic.
- B. The VLAN was not created on the upstream switches.
- C. VLAN512 is a reserved VLAN ID, and not usable for guest VMs.
正解：B
質問 # 117
An administrator receives complaints of poor performance in a particular VM.
Based on the VM performance metric, what is the most likely cause of this behavior?
- A. The host's CPU is severely overloaded.
- B. The VM needs more vCPUs
- C. Oplog is full cannot serve IO request from this VM.
- D. SSD tier is not big enough to serve workloads' IOPS demand.
正解：B
質問 # 118 
The Update Source for LCM has been configured as shown in the exhibit. Inventory is failing consistently.
What is the likely cause of this issue?
- A. Port 433 Is blocked by a firewall.
- B. The administrator does not have a valid portal account.
- C. Port 80 is blocked by a firewall.
- D. The license assigned to the cluster has expired.
正解：A
質問 # 119
What is most likely the cause of this issue?
- A. The VLAN was not created on the upstream switches.
- B. VLAN512 is a reserved VLAN ID, and not usable for guest VMs.
- C. There is a firewall rule blocking VLAN512 traffic
- D. The administrator did not created the VLAN on all hosts
正解：A
質問 # 120
An administrator wants to ensure that data in a container is stored in the most space efficient manner as quickly as possible after being written, Which space efficiency too meets this requirement?
- A. Thin Provisioning
- B. Inline Compression
- C. Cache Deduplication
- D. Erasure Coding
正解：B
解説：
inline compression is a technique that compresses all incoming write I/O operations over 4 KB inline in the persistent write buffer (oplog)23. This approach enables you to use oplog capacity more efficiently and helps drive sustained performance2. From AOS 5.18 onward, inline compression (compression delay=0) is enabled by default for all new containers24.
https://portal.nutanix.com/page/documents/solutions/details?targetId=TN-2032-Data-Efficiency:TN-2032-Data-Efficiency
質問 # 121
......
NCP-MCI-6.5リアル有効で正確な問題集174問題と解答が待ってます：https://jp.fast2test.com/NCP-MCI-6.5-premium-file.html
最新のNCP-MCI-6.5問題集でPDF：https://drive.google.com/open?id=1wR6a48G7ypxcUQQsIlkGz6ju83ZwKUAF