オンラインNCP-MCI-6.5テストブレーン問題集とテストエンジン
リアルNutanix NCP-MCI-6.5試験問題集には正解174問題と解答があります
この試験は60の多肢選択問題から構成され、90分間行われます。候補者は、試験に合格するために500点中300点以上を取得する必要があります。この試験は、コンピュータベースのテストサービスを提供する世界的なリーディングプロバイダであるPearson VUEによって実施されます。候補者は、世界中のどのPearson VUEテストセンターでも試験を受けることができます。
質問 # 103
Administrator is creating a Windows 10 VM that will be used for a virtual desktop template. After creating the VM and booting to the ISO, the administrator is unable to install Windows and receives the following error.
What steps does the administrator need to take to install the OS?
- A. Load the Virtual SCSI pass-through controller.
- B. Load the Nutanix VirtIO Serial Bus Driver.
- C. Load the VirtIO Network Ethernet Adaper.
- D. Load the Nutanix Virtual Balloon Driver.
正解：A
質問 # 104
The administrator wants a container to be displayed and limited to 1TB in the hypervisor.
What advanced container setting must the administrator set?
- A. Reserved Capacity
- B. Advertised Capacity
- C. Reserved Quota
- D. Advertised Quota
正解：B
質問 # 105
Which baseline is used to identify a Zombie VM?
- A. VM has no logins for the past 21 days
- B. Memory usage is less than 1% and memory swap rate is equal to 0 Kbps for the past 21 days. VM has no logins for the past 21 days
- C. Fewer than 30 1/Os and less than 1000 bytes per day of network traffic for the past 21 days
- D. VM is powered off for the past 21 days.
正解：C
質問 # 106
An administrator needs to configure Prism to send encrypted messages to a set of recipients.
Which setting must be applied?
- A. Install SSL certificates on Prism Central
- B. Configure Prism Central to use Cluster Lockdown
- C. Use SMTP Port 25
- D. Set SMTP Security Mode to STARTTLS
正解：D
解説：
The best way for the administrator to configure Prism to send encrypted messages to a set of recipients is to set the SMTP Security Mode to STARTTLS. This will ensure that all messages sent over SMTP are encrypted and secure. Additionally, the administrator should consider installing SSL certificates on Prism Central to ensure that the messages are being sent securely. Finally, the administrator should consider configuring Prism Central to use Cluster Lockdown, which will help ensure that the messages are only sent to the intended recipients.
質問 # 107
What is he recommended approach for a constrained VM?
- A. Reboot the VM
- B. Decrease the VM resources
- C. Delete the VM.
- D. Increase the VM resources.
正解：D
質問 # 108
Administrator is creating a Windows 10 VM that will be used for a virtual desktop template. After creating the VM and booting to the ISO, the administrator is unable to install Windows and receives the following error.
What steps does the administrator need to take to install the OS?
- A. Load the Virtual SCSI pass-through controller.
- B. Load the Nutanix VirtIO Serial Bus Driver.
- C. Load the VirtIO Network Ethernet Adaper.
- D. Load the Nutanix Virtual Balloon Driver.
正解：A
質問 # 109
An administrator receives complaints of poor performance in a particular VM.
Based on the VM performance metric, what is the most likely cause of this behavior?
- A. Oplog is full cannot serve IO request from this VM.
- B. The host's CPU is severely overloaded.
- C. SSD tier is not big enough to serve workloads' IOPS demand.
- D. The VM needs more vCPUs
正解：D
質問 # 110
Which three configuration scenarios are valid for the deployment of Prism Central? (Choose three.)
- A. Prism Elements and Prism Central have proxy configured.
- B. Environments use Network Address Translation.
- C. Environments use the 192.168.5.0/24 CVM management network.
- D. Prism Elements and Prism Central art in different subnets.
- E. Environments do not have Internet access.
正解：B、C、E
質問 # 111
An administrator wants to reduce the largest amount of alert emails received from Prism Central.
Which two settings should the administrator customize to meet this requirement? (Choose two)
- A. Email Recipients
- B. Every Single Alert
- C. Skip empty digest email
- D. Dally Digest
正解：A、D
解説：
According to the Nutanix Support & Insights website1, you can configure alert emails through Prism Central by enabling or disabling customer email notification for each alert. You can also modify or create custom alert policies for different entities and clusters23.
質問 # 112
Which two access protocols are supported by Files? (Choose two.)
- A. ISCSI
- B. NFS
- C. FCOE
- D. SMB
正解：B、D
質問 # 113
Refer to the exhibit.
System Non-Root Partition Usage shows a warning or critical alert The administrator needs to change the frequency of checks and alerts to respond more quickly.
Where in Prism Element should the administrator change the frequency of checks and alerts?
- A. Health Dashboard > Manage Crocks > Frequency
- B. Alerts Dashboard > Manage Checks > Schedule
- C. Health Dashboard > Manage Checks > Schedule
- D. Alerts Dashboard > Manage Checks > Frequency
正解：D
質問 # 114
Which component can be associated with a storage policy?
- A. Vm
- B. Catalog
- C. Category
- D. Subnet
正解：A
解説：
A storage policy can be associated with a VM. A storage policy is a set of rules that define how data objects are stored and protected. It specifies the characteristics of storage, data protection, and data placement for virtual disks that are assigned to a VM. Subnets, catalogs, and categories are not associated with storage policies.https://portal.nutanix.com/page/documents/details?targetId=Prism-Central-Guide-vpc_2022_6:mul-cluster-storage-policy-summary-view-pc-r.html
質問 # 115
What Nutanix feature provides effective caching optimization In VDI environments?
- A. Remote Protection Group
- B. Shadow Clones
- C. Snap Clones
- D. Local Protection Group
正解：B
質問 # 116
An administrator is setting up a Nutanix cluster and needs to configure the default VLAN.
Which configuration should the administrator choose?
- A. Vlan.0
- B. Vlan.1
- C. Vlan.2
- D. Vlan.7
正解：B
解説：
Nutanix cluster is a group of Nutanix nodes that share data and resources across a network1. A VLAN is a virtual LAN that allows devices on different physical LANs to communicate as if they were on the same network2.
by default, a virtual NIC (VM NIC) on a guest VM operates in access mode and can send and receive traffic only over its own specified VLAN. The default VLAN ID for access mode interfaces is 1.
Therefore, by choosing Vlan.1 as the default VLAN, you can simplify the network configuration and avoid potential issues with other VLAN IDs.
質問 # 117
What requires iSCSI initiator configuration in the guest OS to use Volumes?
- A. SQL Server Always On Availability Group
- B. Exchange DAG
- C. Microsoft Windows Failover Cluster
- D. Oracle RAC
正解：C
質問 # 118
An administrator needs to deploy an application with a large amount of data connected via Nutanix volumes.
Which two actions should the administrator take when designing the Volume Group? (Choose two.)
- A. Use multiple subnets for iSCSI traffic
- B. Enable RSS (Receive Side Scaling)
- C. Distribute workload across multiple virtual disks
- D. Enable thick provisioning on the Volume Group(s)
正解：B、C
質問 # 119
An administrator is adding a node with a higher AOS release to an existing cluster.
What is the most efficient action an administrator should take to ensure it is in a supported state?
- A. Perform standalone reimage of the new node and then add to cluster
- B. Add the node to the cluster and reboot all running VMs to use new release
- C. Destroy cluster and foundation with the new node in place
- D. Add the node to the cluster and leave the existing AOS version in place
正解：A
質問 # 120
Refer to the exhibit.
An administrator is trying to implement the solution that is shown in the exhibit, but has been unsuccessful.
Based on the diagram, what is causing the issue?
- A. A remote Witness VM
- B. Network latency
- C. Active containers in both sites
- D. Unsupported hypervisor
正解：B
質問 # 121
An administrator needs to shut down an AHV cluster to relocate hardware. The administrator upgrades NCC and runs health checks.
Which steps should the administrator perform next?
Item instructions: For each procedure, indicate the order in which that procedure must take place to meet the item requirements.
正解：
解説：
質問 # 122
Refer to Exhibit:
An administrator is trying to create a custom alert policy for all VMs.
Why is the Alert warning if field greyed cut?
- A. The Behavioral Anomaly threshold is set.
- B. The Auto resolve alerts option is checked.
- C. The Alert critical if threshold is set.
- D. The Enable Policy option checked.
正解：A
解説：
when you create a custom alert policy, you can choose between two types of thresholds: Static Threshold and Behavioral Anomaly. Static Threshold allows you to set a fixed value for the metric that triggers the alert. Behavioral Anomaly allows you to use machine learning to detect abnormal behavior based on historical data.
If you select Behavioral Anomaly as the threshold type, you cannot set a warning level for the alert. You can only set a critical level that indicates how much deviation from normal behavior is considered an anomaly3. Therefore, the Alert warning if field is greyed out when you select Behavioral Anomaly.
質問 # 123
A newly-hired Nutanix administrator was tasked by the CIO to create a single VM on a test network. The network administrator stated that a native VLAN was used on the Cisco TOR switches with the following parameters:
IP address:172,16.1.2
Network Mask: 255.255.255.0
Default gateway: 172.16.1.1
VLAN:1
The same parameters were used to create a network profile on Nutanix, but the when the VM was on ...
What should the Nutanix administrator do to fix this issue?
- A. Nutanix removed support for native VLAN.
- B. Change VLAN field from vlan. 1 to vlan.0.
- C. Enable IPv6 on the VM.
- D. Use DHCP as opposed to static IP
正解：B
質問 # 124
What is the default network bond setting for an AHV host configuration?
- A. active-backup
- B. active-active
- C. balance-slb
- D. balance-tcp
正解：A
解説：
https://next.nutanix.com/blog-40/network-load-balancing-with-acropolis-hypervisor-6463
質問 # 125
......
有効なNCP-MCI-6.5テスト解答とNutanix NCP-MCI-6.5試験PDF：https://jp.fast2test.com/NCP-MCI-6.5-premium-file.html
Nutanix NCP-MCI-6.5認定リアル2023年最新の模擬試験：https://drive.google.com/open?id=1wR6a48G7ypxcUQQsIlkGz6ju83ZwKUAF