Fortinet NSE6_FWF-6.4認定試験問題集には31練習テスト問題があります [Q10-Q31]

Fortinet NSE6_FWF-6.4認定試験問題集には31練習テスト問題があります

最新NSE6_FWF-6.4試験問題集には高得点で一発合格

Fortinet NSE6_FWF-6.4 認定試験は、ワイヤレスネットワークセキュリティに関連する幅広いトピックをカバーし、企業環境でワイヤレスネットワークを管理および保護する責任を持つプロフェッショナルのスキルと知識を検証するために設計された、ITプロフェッショナルにとって重要な認定試験です。この認定は、IT業界の多くの組織に認められており、ワイヤレスネットワークセキュリティの分野で専門知識を示したいITプロフェッショナルにとって貴重な資格です。

質問 # 10
When using FortiPresence as a captive portal, which two types of public authentication services can be used to access guest Wi-Fi? (Choose two.)

A. Social networks authentication
B. Hardware security token authentication
C. Short message service authentication
D. Software security token authentication

正解：A、C

質問 # 11
What is the first discovery method used by FortiAP to locate the FortiGate wireless controller in the default configuration?

A. DHCP
B. Broadcast
C. Static
D. Multicast

正解：A

質問 # 12
Refer to the exhibit.

If the signal is set to -68 dB on the FortiPlanner site survey reading, which statement is correct regarding the coverage area?

A. Areas with the signal strength equal or stronger than -68 dB are highlighted in multicolor
B. Areas with the signal strength equal to -68 dB are zoomed in to provide better visibility
C. Areas with the signal strength weaker than -68 dB are highlighted in orange and red to indicate that no signal was propagated by the APs.
D. Areas with the signal strength weaker than -68 dB are cut out of the map

正解：C

質問 # 13
When deploying a wireless network that is authenticated using EAP PEAP, which two configurations are required? (Choose two.)

A. A WPA2 or WPA3 Enterprise wireless network
B. An X.509 to authenticate the authentication server
C. A WPA2 or WPA3 personal wireless network
D. An X.509 certificate to authenticate the client

正解：A、B

質問 # 14
Which two statements about background rogue scanning are correct? (Choose two.)

A. A dedicated radio configured for background scanning can support the connection of wireless clients
B. A dedicated radio configured for background scanning can detect rogue devices on all other channels in its configured frequency band
C. Background rogue scanning requires DARRP to be enabled on the AP instance
D. When detecting rogue APs, a dedicated radio configured for background scanning can suppress the rogue AP

正解：A、D

解説：
To enable rogue AP scanning

質問 # 15
Which administrative access method must be enabled on a FortiGate interface to allow APs to connect and function?

A. FortiTelemetry
B. SSH
C. Security Fabric
D. HTTPS

正解：C

質問 # 16
Where in the controller interface can you find a wireless client's upstream and downstream link rates?

A. On the AP CLI, using the cw_diag ksta command
B. On the controller CLI, using the diag wireless-controller wlac -d sta command
C. On the AP CLI, using the cw_diag -d sta command
D. On the controller CLI, using the WiFi Client monitor

正解：B

質問 # 17
Refer to the exhibit.

What does the asterisk (*) symbol beside the channel mean?

A. Indicates channels that are subject to dynamic frequency selection (DFS) regulations
B. Indicates channels that cannot be used because of regulatory channel restrictions
C. Indicates channels that can be used only when Radio Resource Provisioning is enabled
D. Indicates channels that will be scanned by the Wireless Intrusion Detection System (WIDS)

正解：C

質問 # 18
Refer to the exhibit.

If the signal is set to -68 dB on the FortiPlanner site survey reading, which statement is correct regarding the coverage area?

A. Areas with the signal strength weaker than -68 dB are highlighted in orange and red to indicate that no signal was propagated by the APs.
B. Areas with the signal strength equal to -68 dB are zoomed in to provide better visibility
C. Areas with the signal strength equal or stronger than -68 dB are highlighted in multicolor
D. Areas with the signal strength weaker than -68 dB are cut out of the map

正解：C

質問 # 19
Which two statements about distributed automatic radio resource provisioning (DARRP) are correct? (Choose two.)

A. DARRP requires that wireless intrusion detection (WIDS) be enabled to detect neighboring devices.
B. DARRP performs measurements of the number of BSSIDs and their signal strength (RSSI). The controller then uses this information to select the optimum channel for the AP.
C. DARRP performs continuous spectrum analysis to detect sources of interference. It uses this information to allow the AP to select the optimum channel.
D. DARRP measurements can be scheduled to occur at specific times.

正解：A、C

解説：
DARRP (Distributed Automatic Radio Resource Provisioning) technology ensures the wireless infrastructure is always optimized to deliver maximum performance. Fortinet APs enabled with this advanced feature continuously monitor the RF environment for interference, noise and signals from neighboring APs, enabling the FortiGate WLAN Controller to determine the optimal RF power levels for each AP on the network. When a new AP is provisioned, DARRP also ensures that it chooses the optimal channel, without administrator intervention.

質問 # 20
Refer to the exhibits.
Exhibit A

Exhibit B

Exhibit C

A wireless network has been installed in a small office building and is being used by a business to connect its wireless clients. The network is used for multiple purposes, including corporate access, guest access, and connecting point-of-sale and IoT devices.
Users connecting to the guest network located in the reception area are reporting slow performance. The network administrator is reviewing the information shown in the exhibits as part of the ongoing investigation of the problem. They show the profile used for the AP and the controller RF analysis output together with a screenshot of the GUI showing a summary of the AP and its neighboring APs.
To improve performance for the users connecting to the guest network in this area, which configuration change is most likely to improve performance?

A. Enable frequency handoff on the AP to band steer clients
B. Install another AP in the reception area to improve available bandwidth
C. Reduce the number of wireless networks being broadcast by the AP
D. Increase the transmission power of the AP radios

正解：D

質問 # 21
Which statement describes FortiPresence location map functionality?

A. Provides real-time insight into user usage stats
B. Provides real-time insight into user movements
C. Provides real-time insight into user purchase activity
D. Provides real-time insight into user online activity

正解：B

質問 # 22
How are wireless clients assigned to a dynamic VLAN configured for hash mode?

A. Using the current number of wireless clients connected to the SSID and the group the FortiAP is a member of
B. Using the current number of wireless clients connected to the SSID and the number of IPs available in the least busy VLAN
C. Using the current number of wireless clients connected to the SSID and the number of VLANs available in the pool
D. Using the current number of wireless clients connected to the SSID and the number of clients allocated to each of the VLANs

正解：C

解説：
VLAN from the VLAN pool based on a hash of the current number of SSID clients and the number of entries in the VLAN pool.

質問 # 23
Which two configurations are compatible for Wireless Single Sign-On (WSSO)? (Choose two.)

A. A VAP configured to authenticate using a radius server
B. A VAP configured to authenticate locally on FortiGate
C. A VAP configured for WPA2 or 3 Enterprise
D. A VAP configured for captive portal authentication

正解：A、C

解説：
In the SSID choose WPA2-Enterprise authentication.
WSSO is RADIUS-based authentication that passes the user's user group memberships to the FortiGate.

質問 # 24
As standard best practice, which configuration should be performed before configuring FortiAPs using a FortiGate wireless controller?

A. Preauthorize APs
B. Create wireless LAN specific policies
C. Create a custom AP profile
D. Set the wireless controller country setting

正解：C

質問 # 25
What type of design model does FortiPlanner use in wireless design project?

A. Predictive model
B. Architectural model
C. Integration model
D. Analytical model

正解：B

解説：
FortiPlanner will look familiar to anyone who has used architectural or home design software.

質問 # 26
Which factor is the best indicator of wireless client connection quality?

A. Downstream link rate, the connection rate for the AP to the client
B. The receive signal strength (RSS) of the client at the AP
C. The channel utilization of the channel the client is using
D. Upstream link rate, the connection rate for the client to the AP

正解：B

解説：
SSI, or "Received Signal Strength Indicator," is a measurement of how well your device can hear a signal from an access point or router. It's a value that is useful for determining if you have enough signal to get a good wireless connection.

質問 # 27
Which two phases are part of the process to plan a wireless design project? (Choose two.)

A. Project information phase
B. Installation phase
C. Hardware selection phase
D. Site survey phase

正解：B、D

解説：
Reference:
https://www.automation.com/en-us/articles/2015-2/wireless-device-network-planning-and-design

質問 # 28
Refer to the exhibits.
Exhibit A

Exhibit B

A wireless network has been created to support a group of users in a specific area of a building. The wireless network is configured but users are unable to connect to it. The exhibits show the relevant controller configuration for the APs and the wireless network.
Which two configuration changes will resolve the issue? (Choose two.)