本日更新されたNSE6_FWF-6.4練習テスト2022年最新の無料問題集を無料登録！
最新のFast2test NSE6_FWF-6.4のPDF問題集をダウンロード（30問題と解答)
質問 15
Which two roles does FortiPresence analytics assist in generating presence reports? (Choose two.)
- A. Predicting the number of guest users visiting on-site
- B. Comparing current data with historical records
- C. Reporting potential threats by guests on site
- D. Gathering details about on site visitors
正解: A,D
質問 16
You are investigating a wireless performance issue and you are trying to audit the neighboring APs in the PF environment. You review the Rogue APs widget on the GUI but it is empty, despite the known presence of other APs.
Which configuration change will allow neighboring APs to be successfully detected?
- A. Enable Locate WiFi clients when not connected in the relevant AP profiles.
- B. Enable Radio resource provisioning on the relevant AP profiles.
- C. Enable Monitor channel utilization on the relevant AP profiles.
- D. Ensure that all allowed channels are enabled for the AP radios.
正解: B
解説:
The ARRP (Automatic Radio Resource Provisioning) profile improves upon DARRP (Distributed Automatic Radio Resource Provisioning) by allowing more factors to be considered to optimize channel selection among FortiAPs. DARRP uses the neighbor APs channels and signal strength collected from the background scan for channel selection.
質問 17
Refer to the exhibits.
Exhibit A
Exhibit B
Exhibit C
A wireless network has been installed in a small office building and is being used by a business to connect its wireless clients. The network is used for multiple purposes, including corporate access, guest access, and connecting point-of-sale and IoT devices.
Users connecting to the guest network located in the reception area are reporting slow performance. The network administrator is reviewing the information shown in the exhibits as part of the ongoing investigation of the problem. They show the profile used for the AP and the controller RF analysis output together with a screenshot of the GUI showing a summary of the AP and its neighboring APs.
To improve performance for the users connecting to the guest network in this area, which configuration change is most likely to improve performance?
- A. Enable frequency handoff on the AP to band steer clients
- B. Reduce the number of wireless networks being broadcast by the AP
- C. Increase the transmission power of the AP radios
- D. Install another AP in the reception area to improve available bandwidth
正解: C
質問 18
What type of design model does FortiPlanner use in wireless design project?
- A. Architectural model
- B. Analytical model
- C. Integration model
- D. Predictive model
正解: A
解説:
FortiPlanner will look familiar to anyone who has used architectural or home design software.
質問 19
When configuring Auto TX Power control on an AP radio, which two statements best describe how the radio responds? (Choose two.)
- A. When the AP detects any wireless client signal weaker than -70 dBm, it will reduce its transmission power until it reaches the maximum configured TX power limit.
- B. When the AP detects any other wireless signal stronger that -70 dBm, it will reduce its transmission power until it reaches the minimum configured TX power limit.
- C. When the AP detects PF Interference from an unknown source such as a cordless phone with a signal stronger that -70 dBm, it will increase its transmission power until it reaches the maximum configured TX power limit.
- D. When the AP detects any interference from a trusted neighboring AP stronger that -70 dBm, it will reduce its transmission power until it reaches the minimum configured TX power limit.
正解: A,B
質問 20
When configuring a wireless network for dynamic VLAN allocation, which three IETF attributes must be supplied by the radius server? (Choose three.)
- A. 81 Tunnel-Private-Group-ID
- B. 64 Tunnel-Type
- C. 58 Egress-VLAN-Name
- D. 83 Tunnel-Preference
- E. 65 Tunnel-Medium-Type
正解: A,B,E
解説:
The RADIUS user attributes used for the VLAN ID assignment are:
IETF 64 (Tunnel Type)-Set this to VLAN.
IETF 65 (Tunnel Medium Type)-Set this to 802
IETF 81 (Tunnel Private Group ID)-Set this to VLAN ID.
質問 21
Which of the following is a requirement to generate analytic reports using on-site FortiPresence deployment?
- A. DTLS encryption on wireless traffic must be turned off
- B. SQL services must be running
- C. Two wireless APs must be sending data
- D. Wireless network security must be set to open
正解: C
解説:
FortiPresence VM is deployed locally on your site and consists of two virtual machines. All the analytics data collected and computed resides locally on the VMs.
質問 22
Refer to the exhibit.
If the signal is set to -68 dB on the FortiPlanner site survey reading, which statement is correct regarding the coverage area?
- A. Areas with the signal strength weaker than -68 dB are highlighted in orange and red to indicate that no signal was propagated by the APs.
- B. Areas with the signal strength weaker than -68 dB are cut out of the map
- C. Areas with the signal strength equal to -68 dB are zoomed in to provide better visibility
- D. Areas with the signal strength equal or stronger than -68 dB are highlighted in multicolor
正解: D
質問 23
When enabling security fabric on the FortiGate interface to manage FortiAPs, which two types of communication channels are established between FortiGate and FortiAPs? (Choose two.)
- A. FortLink channels
- B. Security channels
- C. Control channels
- D. Data channels
正解: C,D
解説:
The control channel for managing traffic, which is always encrypted by DTLS. l The data channel for carrying client data packets.
質問 24
As standard best practice, which configuration should be performed before configuring FortiAPs using a FortiGate wireless controller?
- A. Create wireless LAN specific policies
- B. Create a custom AP profile
- C. Set the wireless controller country setting
- D. Preauthorize APs
正解: B
質問 25
How are wireless clients assigned to a dynamic VLAN configured for hash mode?
- A. Using the current number of wireless clients connected to the SSID and the number of VLANs available in the pool
- B. Using the current number of wireless clients connected to the SSID and the group the FortiAP is a member of
- C. Using the current number of wireless clients connected to the SSID and the number of clients allocated to each of the VLANs
- D. Using the current number of wireless clients connected to the SSID and the number of IPs available in the least busy VLAN
正解: A
解説:
VLAN from the VLAN pool based on a hash of the current number of SSID clients and the number of entries in the VLAN pool.
質問 26
Which administrative access method must be enabled on a FortiGate interface to allow APs to connect and function?
- A. FortiTelemetry
- B. Security Fabric
- C. HTTPS
- D. SSH
正解: B
質問 27
......
2022年05月最新NSE6_FWF-6.4試験問題集PDFと試験エンジン：https://jp.fast2test.com/NSE6_FWF-6.4-premium-file.html
プレミアム良質なFortinet NSE6_FWF-6.4オンライン問題集：https://drive.google.com/open?id=1uJelOQmMbQdjolrZxX-JZBtX-yR6TsYS