あなたのNSE6_FWF-6.4試験100%合格問題集はここFast2testで一発合格
突破上級者がシミュレーションされたNSE6_FWF-6.4試験問題集PDF
Fortinet NSE6_FWF-6.4試験は、ワイヤレスLANアーキテクチャ、ワイヤレスセキュリティプロトコル、RF計画とサイト調査、WLANトラブルシューティングなど、幅広いトピックをカバーしています。候補者はこれらの概念を強く理解し、実際のシナリオでそれらを適用できるようにする必要があります。この試験は理論的な知識と実践的なスキルの両方をテストするために設計されているため、候補者は複数選択肢の質問と実践的な問題の両方に答える準備をしておく必要があります。
質問 # 16
When configuring Auto TX Power control on an AP radio, which two statements best describe how the radio responds? (Choose two.)
- A. When the AP detects PF Interference from an unknown source such as a cordless phone with a signal stronger that -70 dBm, it will increase its transmission power until it reaches the maximum configured TX power limit.
- B. When the AP detects any other wireless signal stronger that -70 dBm, it will reduce its transmission power until it reaches the minimum configured TX power limit.
- C. When the AP detects any wireless client signal weaker than -70 dBm, it will reduce its transmission power until it reaches the maximum configured TX power limit.
- D. When the AP detects any interference from a trusted neighboring AP stronger that -70 dBm, it will reduce its transmission power until it reaches the minimum configured TX power limit.
正解：B、C
質問 # 17
A tunnel mode wireless network is configured on a FortiGate wireless controller.
Which task must be completed before the wireless network can be used?
- A. Security Fabric and HTTPS must be enabled on the wireless network interface
- B. The wireless network interface must be assigned a Layer 3 address
- C. The new network must be manually assigned to a FortiAP profile.
- D. The wireless network to Internet firewall policy must be configured
正解：D
解説：
A FortiGate unit is an industry leading enterprise firewall. In addition to consolidating all the functions of a network firewall, IPS, anti-malware, VPN, WAN optimization, Web filtering, and application control in a single platform, FortiGate also has an integrated Wi-Fi controller.
質問 # 18
Refer to the exhibit.
What does the asterisk (*) symbol beside the channel mean?
- A. Indicates channels that can be used only when Radio Resource Provisioning is enabled
- B. Indicates channels that will be scanned by the Wireless Intrusion Detection System (WIDS)
- C. Indicates channels that are subject to dynamic frequency selection (DFS) regulations
- D. Indicates channels that cannot be used because of regulatory channel restrictions
正解：C
質問 # 19
How are wireless clients assigned to a dynamic VLAN configured for hash mode?
- A. Using the current number of wireless clients connected to the SSID and the group the FortiAP is a member of
- B. Using the current number of wireless clients connected to the SSID and the number of IPs available in the least busy VLAN
- C. Using the current number of wireless clients connected to the SSID and the number of VLANs available in the pool
- D. Using the current number of wireless clients connected to the SSID and the number of clients allocated to each of the VLANs
正解：C
解説：
VLAN from the VLAN pool based on a hash of the current number of SSID clients and the number of entries in the VLAN pool.
質問 # 20
Which statement describes FortiPresence location map functionality?
- A. Provides real-time insight into user online activity
- B. Provides real-time insight into user purchase activity
- C. Provides real-time insight into user usage stats
- D. Provides real-time insight into user movements
正解：D
質問 # 21
Refer to the exhibits.
Exhibit A
Exhibit B
Exhibit C
A wireless network has been installed in a small office building and is being used by a business to connect its wireless clients. The network is used for multiple purposes, including corporate access, guest access, and connecting point-of-sale and IoT devices.
Users connecting to the guest network located in the reception area are reporting slow performance. The network administrator is reviewing the information shown in the exhibits as part of the ongoing investigation of the problem. They show the profile used for the AP and the controller RF analysis output together with a screenshot of the GUI showing a summary of the AP and its neighboring APs.
To improve performance for the users connecting to the guest network in this area, which configuration change is most likely to improve performance?
- A. Enable frequency handoff on the AP to band steer clients
- B. Increase the transmission power of the AP radios
- C. Install another AP in the reception area to improve available bandwidth
- D. Reduce the number of wireless networks being broadcast by the AP
正解：B
質問 # 22
Refer to the exhibit.
If the signal is set to -68 dB on the FortiPlanner site survey reading, which statement is correct regarding the coverage area?
- A. Areas with the signal strength equal to -68 dB are zoomed in to provide better visibility
- B. Areas with the signal strength weaker than -68 dB are cut out of the map
- C. Areas with the signal strength equal or stronger than -68 dB are highlighted in multicolor
- D. Areas with the signal strength weaker than -68 dB are highlighted in orange and red to indicate that no signal was propagated by the APs.
正解：C
質問 # 23
Which of the following is a requirement to generate analytic reports using on-site FortiPresence deployment?
- A. Wireless network security must be set to open
- B. SQL services must be running
- C. DTLS encryption on wireless traffic must be turned off
- D. Two wireless APs must be sending data
正解：B
質問 # 24
Which factor is the best indicator of wireless client connection quality?
- A. The receive signal strength (RSS) of the client at the AP
- B. Upstream link rate, the connection rate for the client to the AP
- C. The channel utilization of the channel the client is using
- D. Downstream link rate, the connection rate for the AP to the client
正解：A
解説：
SSI, or "Received Signal Strength Indicator," is a measurement of how well your device can hear a signal from an access point or router. It's a value that is useful for determining if you have enough signal to get a good wireless connection.
質問 # 25
Which two phases are part of the process to plan a wireless design project? (Choose two.)
- A. Site survey phase
- B. Hardware selection phase
- C. Project information phase
- D. Installation phase
正解：A、D
解説：
Reference:
https://www.automation.com/en-us/articles/2015-2/wireless-device-network-planning-and-design
質問 # 26
When enabling security fabric on the FortiGate interface to manage FortiAPs, which two types of communication channels are established between FortiGate and FortiAPs? (Choose two.)
- A. Security channels
- B. Data channels
- C. Control channels
- D. FortLink channels
正解：B、C
解説：
The control channel for managing traffic, which is always encrypted by DTLS. l The data channel for carrying client data packets.
質問 # 27
Refer to the exhibits.
Exhibit A
Exhibit B
A wireless network has been created to support a group of users in a specific area of a building. The wireless network is configured but users are unable to connect to it. The exhibits show the relevant controller configuration for the APs and the wireless network.
Which two configuration changes will resolve the issue? (Choose two.)
- A. For both interfaces in the wtp-profile, configure set vaps to be "Authors"
- B. Increase the transmission power of the AP radio interfaces
- C. For both interfaces in the wtp-profile, configure vap-all to be manual
- D. Disable intra-vap-privacy for the Authors vap-wireless network
正解：C、D
質問 # 28
Refer to the exhibit.
What does the asterisk (*) symbol beside the channel mean?
- A. Indicates channels that can be used only when Radio Resource Provisioning is enabled
- B. Indicates channels that will be scanned by the Wireless Intrusion Detection System (WIDS)
- C. Indicates channels that cannot be used because of regulatory channel restrictions
- D. Indicates channels that are subject to dynamic frequency selection (DFS) regulations
正解：A
質問 # 29
As a network administrator, you are responsible for managing an enterprise secure wireless LAN. The controller is based in the United States, and you have been asked to deploy a number of managed APs in a remote office in Germany.
What is the correct way to ensure that the RF channels and transmission power limits are appropriately configured for the remote APs?
- A. Configure the controller for the correct country code for Germany
- B. Create a new FortiAP profile and change the county code settings on the profile
- C. Clone a suitable FortiAP profile and change the county code settings on the profile
- D. Configure the APs individually by overriding the settings in Managed FortiAPs
正解：C
質問 # 30
Which two roles does FortiPresence analytics assist in generating presence reports? (Choose two.)
- A. Gathering details about on site visitors
- B. Comparing current data with historical records
- C. Predicting the number of guest users visiting on-site
- D. Reporting potential threats by guests on site
正解：A、C
質問 # 31
Which two configurations are compatible for Wireless Single Sign-On (WSSO)? (Choose two.)
- A. A VAP configured to authenticate locally on FortiGate
- B. A VAP configured for WPA2 or 3 Enterprise
- C. A VAP configured for captive portal authentication
- D. A VAP configured to authenticate using a radius server
正解：B、D
解説：
In the SSID choose WPA2-Enterprise authentication.
WSSO is RADIUS-based authentication that passes the user's user group memberships to the FortiGate.
質問 # 32
Refer to the exhibit.
If the signal is set to -68 dB on the FortiPlanner site survey reading, which statement is correct regarding the coverage area?
- A. Areas with the signal strength equal to -68 dB are zoomed in to provide better visibility
- B. Areas with the signal strength weaker than -68 dB are cut out of the map
- C. Areas with the signal strength weaker than -68 dB are highlighted in orange and red to indicate that no signal was propagated by the APs.
- D. Areas with the signal strength equal or stronger than -68 dB are highlighted in multicolor
正解：C
質問 # 33
What is the first discovery method used by FortiAP to locate the FortiGate wireless controller in the default configuration?
- A. Static
- B. Broadcast
- C. DHCP
- D. Multicast
正解：C
質問 # 34
When deploying a wireless network that is authenticated using EAP PEAP, which two configurations are required? (Choose two.)
- A. A WPA2 or WPA3 personal wireless network
- B. An X.509 certificate to authenticate the client
- C. A WPA2 or WPA3 Enterprise wireless network
- D. An X.509 to authenticate the authentication server
正解：C、D
質問 # 35
......
Fortinet NSE6_FWF-6.4 認定は、ネットワークセキュリティ分野でキャリアアップを目指す専門家にとって貴重な資産です。これは、個人が安全な無線LANソリューションを設計・実装できるスキルと知識を有していることを雇用主に証明するものであり、今日のデジタル環境においてますます重要性が高まっています。この認定を取得することで、競争の激しい就職市場で個人が目立つことができ、キャリアアップの新たな機会が開かれることがあります。
NSE6_FWF-6.4問題集トレーニングコース完全版：https://jp.fast2test.com/NSE6_FWF-6.4-premium-file.html
お客様を合格させる試験学習材料Fortinet NSE 6 - Secure Wireless LAN 6.4：https://drive.google.com/open?id=1uJelOQmMbQdjolrZxX-JZBtX-yR6TsYS