Fortinet NSE 6 - Secure Wireless LAN 6.4練習テスト2022年最新のNSE6_FWF-6.4ストレスなしで合格させちゃう！
練習NSE 6 Network Security Specialist NSE6_FWF-6.4問題集オンライン試験練習テストと詳細な解説付き！
質問 12
Refer to the exhibit.
What does the asterisk (*) symbol beside the channel mean?
- A. Indicates channels that are subject to dynamic frequency selection (DFS) regulations
- B. Indicates channels that cannot be used because of regulatory channel restrictions
- C. Indicates channels that will be scanned by the Wireless Intrusion Detection System (WIDS)
- D. Indicates channels that can be used only when Radio Resource Provisioning is enabled
正解: D
質問 13
Which two statements about distributed automatic radio resource provisioning (DARRP) are correct? (Choose two.)
- A. DARRP performs measurements of the number of BSSIDs and their signal strength (RSSI). The controller then uses this information to select the optimum channel for the AP.
- B. DARRP measurements can be scheduled to occur at specific times.
- C. DARRP performs continuous spectrum analysis to detect sources of interference. It uses this information to allow the AP to select the optimum channel.
- D. DARRP requires that wireless intrusion detection (WIDS) be enabled to detect neighboring devices.
正解: C,D
解説:
DARRP (Distributed Automatic Radio Resource Provisioning) technology ensures the wireless infrastructure is always optimized to deliver maximum performance. Fortinet APs enabled with this advanced feature continuously monitor the RF environment for interference, noise and signals from neighboring APs, enabling the FortiGate WLAN Controller to determine the optimal RF power levels for each AP on the network. When a new AP is provisioned, DARRP also ensures that it chooses the optimal channel, without administrator intervention.
質問 14
Which two statements about background rogue scanning are correct? (Choose two.)
- A. When detecting rogue APs, a dedicated radio configured for background scanning can suppress the rogue AP
- B. Background rogue scanning requires DARRP to be enabled on the AP instance
- C. A dedicated radio configured for background scanning can detect rogue devices on all other channels in its configured frequency band
- D. A dedicated radio configured for background scanning can support the connection of wireless clients
正解: B,C
質問 15
Which of the following is a requirement to generate analytic reports using on-site FortiPresence deployment?
- A. SQL services must be running
- B. Two wireless APs must be sending data
- C. DTLS encryption on wireless traffic must be turned off
- D. Wireless network security must be set to open
正解: B
解説:
FortiPresence VM is deployed locally on your site and consists of two virtual machines. All the analytics data collected and computed resides locally on the VMs.
質問 16
Refer to the exhibit.
What does the asterisk (*) symbol beside the channel mean?
- A. Indicates channels that can be used only when Radio Resource Provisioning is enabled
- B. Indicates channels that cannot be used because of regulatory channel restrictions
- C. Indicates channels that will be scanned by the Wireless Intrusion Detection System (WIDS)
- D. Indicates channels that are subject to dynamic frequency selection (DFS) regulations
正解: D
質問 17
Which two phases are part of the process to plan a wireless design project? (Choose two.)
- A. Installation phase
- B. Project information phase
- C. Site survey phase
- D. Hardware selection phase
正解: B,C
質問 18
As standard best practice, which configuration should be performed before configuring FortiAPs using a FortiGate wireless controller?
- A. Create wireless LAN specific policies
- B. Preauthorize APs
- C. Set the wireless controller country setting
- D. Create a custom AP profile
正解: D
質問 19
Which of the following is a requirement to generate analytic reports using on-site FortiPresence deployment?
- A. Two wireless APs must be sending data
- B. SQL services must be running
- C. DTLS encryption on wireless traffic must be turned off
- D. Wireless network security must be set to open
正解: B
質問 20
Which statement is correct about security profiles on FortiAP devices?
- A. Only bridge mode SSIDs can apply the security profiles
- B. Disable DTLS on FortiAP
- C. FortiGate performs inspection the wireless traffic
- D. Security profiles on FortiAP devices can use FortiGate subscription to inspect the traffic
正解: A
質問 21
Which factor is the best indicator of wireless client connection quality?
- A. Downstream link rate, the connection rate for the AP to the client
- B. The receive signal strength (RSS) of the client at the AP
- C. The channel utilization of the channel the client is using
- D. Upstream link rate, the connection rate for the client to the AP
正解: D
質問 22
Part of the location service registration process is to link FortiAPs in FortiPresence.
Which two management services can configure the discovered AP registration information from the FortiPresence cloud? (Choose two.)
- A. FortiAP Cloud
- B. FortiSwitch
- C. AP Manager
- D. FortiGate
正解: A,D
解説:
FortiGate, FortiCloud wireless access points (send visitor data in the form of station reports directly to FortiPresence)
質問 23
Which two roles does FortiPresence analytics assist in generating presence reports? (Choose two.)
- A. Reporting potential threats by guests on site
- B. Comparing current data with historical records
- C. Predicting the number of guest users visiting on-site
- D. Gathering details about on site visitors
正解: C,D
質問 24
What is the first discovery method used by FortiAP to locate the FortiGate wireless controller in the default configuration?
- A. Multicast
- B. DHCP
- C. Broadcast
- D. Static
正解: B
質問 25
When using FortiPresence as a captive portal, which two types of public authentication services can be used to access guest Wi-Fi? (Choose two.)
- A. Short message service authentication
- B. Software security token authentication
- C. Hardware security token authentication
- D. Social networks authentication
正解: C,D
解説:
This information along with the social network authentication logins with Facebook, Google, Instagram, LinkedIn, or FortiPresence using your WiFi.
Captive Portal configurations for social media logins and internet access. You can add and manage sites using the integrated Google maps and manoeuvre your hardware infrastructure easily.
質問 26
When configuring Auto TX Power control on an AP radio, which two statements best describe how the radio responds? (Choose two.)
- A. When the AP detects any interference from a trusted neighboring AP stronger that -70 dBm, it will reduce its transmission power until it reaches the minimum configured TX power limit.
- B. When the AP detects any other wireless signal stronger that -70 dBm, it will reduce its transmission power until it reaches the minimum configured TX power limit.
- C. When the AP detects PF Interference from an unknown source such as a cordless phone with a signal stronger that -70 dBm, it will increase its transmission power until it reaches the maximum configured TX power limit.
- D. When the AP detects any wireless client signal weaker than -70 dBm, it will reduce its transmission power until it reaches the maximum configured TX power limit.
正解: B,D
質問 27
Which two roles does FortiPresence analytics assist in generating presence reports? (Choose two.)
- A. Predicting the number of guest users visiting on-site
- B. Reporting potential threats by guests on site
- C. Comparing current data with historical records
- D. Gathering details about on site visitors
正解: C,D
質問 28
Which statement describes FortiPresence location map functionality?
- A. Provides real-time insight into user movements
- B. Provides real-time insight into user purchase activity
- C. Provides real-time insight into user usage stats
- D. Provides real-time insight into user online activity
正解: A
質問 29
What type of design model does FortiPlanner use in wireless design project?
- A. Predictive model
- B. Analytical model
- C. Architectural model
- D. Integration model
正解: A
質問 30
A tunnel mode wireless network is configured on a FortiGate wireless controller.
Which task must be completed before the wireless network can be used?
- A. The new network must be manually assigned to a FortiAP profile.
- B. Security Fabric and HTTPS must be enabled on the wireless network interface
- C. The wireless network to Internet firewall policy must be configured
- D. The wireless network interface must be assigned a Layer 3 address
正解: C
解説:
A FortiGate unit is an industry leading enterprise firewall. In addition to consolidating all the functions of a network firewall, IPS, anti-malware, VPN, WAN optimization, Web filtering, and application control in a single platform, FortiGate also has an integrated Wi-Fi controller.
質問 31
......
時間限定！今すぐ無料アクセスNSE6_FWF-6.4練習問題：https://drive.google.com/open?id=1uJelOQmMbQdjolrZxX-JZBtX-yR6TsYS
最適なNSE6_FWF-6.4試験学習資料と準備材料を提供しています：https://jp.fast2test.com/NSE6_FWF-6.4-premium-file.html