E_S4HCON2023更新された試験問題集で[2023年最新] 練習有効な試験問題集 [Q33-Q56]

E_S4HCON2023更新された試験問題集で[2023年最新] 練習有効な試験問題集

E_S4HCON2023サンプルには正確で更新された問題

質問 # 33
Which downtime optimization technique requires the minimized downtime service (MDS) from SAP?

A. Downtime Optimized DMO (DoDMO)
B. Downtime Optimized Data Conversion (DoC)
C. Near-Zero Downtime Maintenance (nZDM)
D. Near-Zero Downtime Technology (NZDT)

正解：D

質問 # 34
You are using the maintenance planner to calculate the required software components for your SAP S4HANA conversion. What do you need to know regarding SUM?

A. As soon as the next SP level of SUM is available, the current version of SUM passes into "patch on request mode" immediately.
B. AA

正解：A

質問 # 35
What can you achieve by setting the SUM parameter "migration_only" to 1 in parameter file SAPup_add.par?
Please choose the correct answer.
Response:

A. An SAP S/4HANA conversion is performed, without adapting the customer data.
B. An upgrade of the software components is performed, without changing the database type.
C. A migration of the SAP system to a new hardware is performed, without performing an SAP S/4HANA conversion.
D. A change of the database type is performed, without changing the software components.

正解：D

質問 # 36
During the SUM procedure, the phase XPRAS_AIMMRG fails. Where can you most likely see the reason for the error?
There are 2 correct answers to this question.
Response:

A. In the corresponding R3trans log files of this phase
B. In the latest log files in the SUM directory, subdirectory ABAP, subdirectory tmp
C. In the job log for the corresponding job in SM37 (Job Overview)
D. In the latest log files in the SUM directory, subdirectory ABAP, subdirectory log

正解：C、D

質問 # 37
The SUM procedure stops with an error during uptime. How can you identify the current phase, the one in which SUM encountered an error?
There are 2 correct answers to this question.
Response:

A. Check the most recent entries in SAPup.log
B. Check the system log (transaction SM21) of the SAP system
C. Check the messages shown by the SUM UI
D. Check the most recent entries shown in file sapevt.trc

正解：A、C

質問 # 38
SUM was registered at the SAP Host Agent. Based on which information does the SAP Host Agent determine the path to the SUM directory.

A. The path was stored to the environment of user <sid>adm during registration
B. The path is taken from the URL entered in the browser to start SUM
C. The path was stored in file sumabap conf during registration
D. The path was stored in file host_profile during registration

正解：C

質問 # 39
You are using DMO of SUM. You defined 40 parallel R3load processes during uptime and 80 parallel R3load processes during downtime.
The server provides 8 CPU cores. Phase EU_CLONE_MIG_DT_RUN is running. In the Charts Control Center you can see 40 Process Buckets being executed in parallel.
Why are 40 Process Buckets executed in parallel?
Please choose the correct answer.
Response:

A. The number of CPU cores does not allow more than 40 R31oad processes to be run in parallel.
B. There is a maximum of 40 parallel R31oad processes within this specific downtime phase.
C. These are 40 pairs of R3load processes, so there are 80 R3load processes running.
D. SUM is still running in uptime; the number of 40 defined R31oad processes is considered.

正解：C

質問 # 40
What is the benefit of using the file UPGANA.XML from a previous SUM run?
Please choose the correct answer.
Response:

A. To auto-fill specific fields on selected screens on the SUM UI
B. To make the progress information within SUM UI more accurate
C. To repeat specific phases during the SUM run
D. To skip selected phases during the SUM run

正解：B

質問 # 41
What do you need to consider when performing the SI checks for an SAP S'4I 1ANA conversion? Note There are 2 correct answers to this question.

A. The errors from the SI checks must be solved, otherwise. SUM will report an error
B. The SI checks are executed in the development system and the results are transported into the subsequent systems
C. You need to build up an SI check framework by applying SAP Notes
D. You need an SAP system based on AS ABAP 7.50 or above for the SI check framework

正解：C、D

質問 # 42
Which additional configuration options are offered by SUM when selecting "Switch expert mode on" in main configuration option "Standard"?
There are 2 correct answers to this question.
Response:

A. Reuse a profile for the shadow instance from a previous run.
B. Choose the instance number of the shadow instance.
C. Keep archiving on during the whole procedure.
D. Use the Near Zero Downtime Maintenance Technology (NZDM).

正解：A、B

質問 # 43
You are performing an upgrade of an SAP ECC development system with SUM. What is the earliest point when the upgrade is considered complete and you can allow all dialog users to log on to the system?
Please choose the correct answer.
Response:

A. During the SUM roadmap step "Postprocessing", after the post procedure steps are complete
B. During the SUM roadmap step "Postprocessing", in parallel with post procedure steps
C. After the SUM roadmap step "Execution" is finished and before "Postprocessing"
D. After the SUM roadmap step "Postprocessing" and post procedure steps are finished

正解：A

質問 # 44
You have chosen the "Advanced" option during the main configuration of the SUM tool. Which steps take place via the shadow instance?
There are 2 correct answers to this question.
Response:

A. Conversion of application tables (PARCONVJJPG)
B. Modification adjustment (SPDD)
C. Switch to new repository (EU_SWITCH)
D. Activation of dictionary objects (ACT_UPG)

正解：B、D

質問 # 45
You are performing an inplace SAP S/4HANA conversion including DMO. What is the latest point in time when you can reset the procedure without losing data?

A. The start of the Execution roadmap step
B. The end of the database migration
C. The start of the business downtime
D. The end of the business downtime

正解：D

質問 # 46
You are upgrading a three-system landscape DEV - QAS - PRD. The upgrade project contains a Unicode conversion. You have already upgraded the DEV and the QAS system but not yet the PRD system. What do you need to consider? Please choose the correct answer.

A. The upgrade of the PRD must be finished before you start new development in the DEV.
B. The transport between Unicode and non-Unicode systems is forbidden.
C. The transport domain of systems DEV and QAS must differ from the transport domain of system PRD.
D. The upgrade of the PRD must be finished before you import any transports from the upgraded DEV system into the PRD.

正解：D

質問 # 47
What is the main purpose of performing benchmark runs for an SAP S/4HANA conversion?

A. To optimize the migration
B. To optimize the main import
C. To optimize the activation
D. To optimize the conversion

正解：A

質問 # 48
How does SUM recognize modification adjustment transports from predecessor systems?
Please choose the correct answer.
Response:

A. By searching for transport requests in DIR_TRANS, subdirectory "transport"
B. By searching for transport requests in the file umodauto.Ist
C. By searching for transport requests named <SID>K0<number>
D. By searching for transport requests that are assigned to the project SAP_ADJUST

正解：B

質問 # 49
Which circumstances will allow SUM to run without the creation of a shadow system?
Please choose the correct answer.
Response:

A. Using the database migration option (DMO) for SUM
B. Using the main configuration option "Single System" when installing an Add-On
C. Using the main configuration option "Standard" when applying SAP Support Packages
D. Using the main configuration option "Single System" in case of an upgrade.

正解：B

質問 # 50
You are performing an SAP S/4HANA conversion. When does the silent data migration (SDM) take place?

A. Before the start of the SUM technical downtime
B. During the Execution roadmap step
C. After SUM has ended
D. During the SUM technical downtime

正解：D

質問 # 51
You are performing an upgrade with SUM. You are in the BIND_PATCH phase of the roadmap step
"Configuration". For some software components you find entries in the "Calculated level" column.
What does the "Calculated level" indicate for those software components?
Please choose the correct answer.
Response:

A. The SAP Support Packages found in the download directory
B. The SAP Support Packages contained in the upgrade media
C. The SAP Support Packages that will be bound to the upgrade
D. The SAP Support packages of the Support Package Stack, calculated by the Maintenance Planner

正解：A

質問 # 52
You are performing an upgrade with SUM using DMO to an AS ABAP 7.50 based SAP system. You entered a specific number of R3Ioad processes during Roadmap step "Extraction".
Where can you change this during the migration via the Utilities option of the SUM UI?
There are 2 correct answers to this question
Response:

A. In DMO Migration Preparation
B. In SUM Phaselist
C. In SUM Parameters
D. In Process Control Center

正解：C、D

質問 # 53
You are executing as SAP S/4HANA Conversion with scenario strategy Standard. When will the shadow instance be stopped for the last time?

A. At the end
B. Before the downtime starts
C. As part of the cleanup process
D. Early in the downtime

正解：A

質問 # 54
You are planning to upgrade your SAP ECC 6.07 system running on a single codepage (SCP) to SAP ECC
6.08. What is the recommended option to perform this upgrade?
Please choose the correct answer.
Response:

A. Perform the Unicode conversion before the upgrade to SAP ECC 6.08.
B. Perform the upgrade to SAP ECC 6.08 before the Unicode conversion.
C. Combine the upgrade and the Unicode conversion using the Combined Upgrade &Unicode Conversion (CU &UC) procedure.
D. Combine the upgrade and the Unicode conversion using the Twin Upgrade &Unicode Conversion (TU
&UC) procedure.

正解：A

質問 # 55
You are executing a standard SUM procedure to update an SAP system using main configuration mode
"Standard". When will the shadow system be stopped for the last time?
Please choose the correct answer.
Response: