350-501更新された試験問題集で[2023年最新] 練習有効な試験問題集 [Q87-Q109]

350-501更新された試験問題集で[2023年最新] 練習有効な試験問題集

350-501サンプルには正確で更新された問題

Cisco 350-501 認定試験は、Cisco サービスプロバイダネットワークコアテクノロジの実装と運用に関する候補者のスキルと知識を必要とする重要な検証です。ネットワーキングコンセプトに強い基盤と Cisco 装置の実地経験を持つ候補者は、試験の準備をし、サービスプロバイダ業界でのキャリアを進めるために貴重な資格を取得することができます。

質問 # 87
Refer to the exhibit.

What type of configuration is it?

A. It is configuration that requires OSPF to also be running to have optimized Cisco MPLS TE tunnels.
B. It is configuration that requires an explicit Cisco MPLS TE path to be configured for the tunnel to run.
C. It is configuration that requires a dynamic Cisco MPLS TE path to be configured for the tunnel to run.
D. It is configuration for the head-end router of a Cisco MPLS TE tunnel with segment routing.

正解：D

質問 # 88
Refer to the exhibit.

The network engineer who manages ASN 65010 is provisioning a customer VRF named CUSTOMER-ABC on PE-2. The PE-CE routing protocol is OSPF Internet reachability is available via the OSPF 0 0 0.0/0 route advertised by CE-1 to PE-1 In the customer VRF Which configuration must the network engineer Implement on PE-2 so that CE-2 has connectivity to the Internet?
A)

B)

C)

D)

A. Option D
B. Option B
C. Option A
D. Option C

正解：D

質問 # 89
Refer to the exhibit. A network operator needs to shut down interface Gi0/0/0/2 for maintenance.
What occurs to the interface states of Gi0/0/0/0 and Gi0/0/0/1?

A. Gi0/0/0/1 becomes active Gi0/0/0/0 remains standby
B. Gi0/0/0/0 becomes active. Gi0/00/1 remains standby
C. Gi0/0/0/1 and Gi0/0/0/0 become active
D. Gi0/0/0/1 and Gi0//0/0 remains standby

正解：A

解説：
The priority is 0x8000 an the lower Port ID wins.
https://www.cisco.com/c/en/us/td/docs/routers/xr12000/software/xr12k_r4-
1/interfaces/command/reference/interfaces_cr41xr12k_chapter8.html#wp948389616

質問 # 90
Drag and Drop Question
Drag and drop the multicast concepts from the left onto the correct description on the right.

正解：

解説：

質問 # 91

Refer to the exhibit. A network engineer is implementing QoS services. Which two statements about the qos- group keyword on Cisco IOS XR are true? (Choose two.)

A. QoS group marking occurs on the ingress.
B. QoS group can be used in fabric QoS policy as match criteria.
C. It marks packets for end-to-end QoS policy enforcement across the network.
D. It cannot be used with priority traffic class.
E. The QoS group numbering corresponds to priority level.

正解：A、B

解説：
Section: Services
Explanation/Reference:

質問 # 92
Refer to the exhibit:

What does the REST API command do?

A. It displays the information identified by Descriptions xml
B. It retrieves the information requested by Descriptions xml
C. It executes the commands specified in Descriptions xml
D. It removes the information identified by Descriptions xml

正解：C

質問 # 93
Refer to the exhibit.

A network administrator is implementing IGMP to enable multicast feed transmission to the receiver. Which configuration must the administrator deploy on GW1 to permit IGMP Joins only to the assigned (S, G) feed?
A)

B)

C)

D)

A. Option D
B. Option C
C. Option B
D. Option A

正解：C

解説：

質問 # 94
Refer to the exhibit.

Refer to the exhibit. EIGRP a running across the core lo exchange Internal routes, and each router maintains 6GP adjacency with the other routers on the network. An operator has configured static routes on the edge routers R1 and R2 for IP address 10.0.1.1. which is used as a black hole route as shown. Which configuration should the operator Implement to me management rouler to create a route map that will redistribute lagged static routes into BGP and create a static route to blackhole traffic with tag 777 that Is destined to server at 192.168.10.100?

A. Option B
B. Option C
C. Option A
D. Option D

正解：D

質問 # 95
Refer to the exhibit:

What is the URL used for with REST API?

A. It is used to send a TACACS+ authentication request to a server
B. It is used to send a message to the APIC to perform an operation on a managed object or class operator
C. It is used to initiate an FTP session to save a running configuration of a device.
D. It is used to contact a URL filter to determine the efficacy of a web address

正解：B

質問 # 96
Drag and drop the technologies from the left onto the correct definitions on the right.

正解：

解説：

質問 # 97
Refer to the exhibit. CE1 and CE2 require connectivity to the internet through the ISP connected to PE3. What should an engineer configure to complete this task?

A. CE1 and CE2 must be configured to use a static default route with a next-hop of PE3 to reach internet routes.
B. PE2 must be configured to serve as a route reflector for PE3 routes learned from the internet. PE2 then shares the routes with CE1 and CE2.
C. CE1 and CE2 must be configured with a route distinguisher in the PE1 VRF that dynamically imports the route from the internet.
D. PE1 must be configured with an import route target in the CE1 VRF that matches the export route target for the internet VRF on PE3.

正解：B

質問 # 98
Which task must be performed first to Implement BFD in an IS-IS environment?

A. Configure BFD in an interface configuration mode
B. Configure BFD under the IS-IS process
C. Configure all ISIS routers as Level 2 devices
D. Disable Cisco Express Forward.ng on all interfaces running routing protocols other than IS-IS

正解：A

質問 # 99
Refer to the exhibit.

While troubleshooting the OSPF adjacency between routers R1 and R2 an engineer noticed that both routers are stuck in the EXCHANGE/EXSTART state. What should the engineer fix to solve the ongoing issue?

A. match MTU values
B. match OSPF areas
C. match OSPF network types
D. match IPv4 addresses

正解：A

質問 # 100
Refer the exhibit.

Users on a network connected to router R3 report slow speeds when they connect to the server connected to R2. After analyzing traffic on the network, a network engineer identified congestion on the link between R2 and R3 as the cause. Which QoS service must the engineer implement to drop traffic on the link when it exceeds a configured threshold?

A. class-based weighted fair queueing
B. traffic shaping
C. first-in, first-out
D. traffic policing

正解：D

解説：
https://www.cisco.com/c/en/us/support/docs/quality-of-service-qos/qos-policing/19645-policevsshape.html

質問 # 101
Refer to the exhibit:

When implementing an LDP protocol, an engineer experienced an issue between two directly connected routers and noticed that no LDP neighbor exists for 1.1.1.1.
Which factor should be the reason for this situation?

A. LDP needs to be enabled on the R2 loopback interface
B. R2 sees the wrong type of hellos from R1
C. R2 does not see any hellos from R1
D. LDP needs to be enabled on the R2 physical interface

正解：C

質問 # 102

Refer to the exhibit. A network engineer is implementing QoS services. Which two statements about the qos- group keyword on Cisco IOS XR are true? (Choose two.)

A. QoS group marking occurs on the ingress.
B. QoS group can be used in fabric QoS policy as match criteria.
C. It marks packets for end-to-end QoS policy enforcement across the network.
D. It cannot be used with priority traffic class.
E. The QoS group numbering corresponds to priority level.

正解：A、B

解説：
Section: Services

質問 # 103
Drag and drop the OSPF and IS-IS Cisco MPLS TE extensions from the left to their functional descriptions on the right.

正解：

解説：

質問 # 104
Refer to the exhibit. Router 1 and router 2 are running BGP. and router 2 and router 3 are running OSPF Area 0. Router 1 is advertising loopback interlaces Lo 0 and lo 2. and router 2 is redistributing BGP into OSPF Area 0.
Which configuration must an administrator apply so that router 2 uses a route map to redistribute only the internal route from Lo 2?

正解：B

質問 # 105
Refer to the exhibit.

What does the script configure?

A. a physical domain
B. a static VLAN
C. selectors for the in-band management
D. a VLAN namespace

正解：B

質問 # 106

Refer to the exhibit. You are configuring an administrative domain in the given multi-vendor environment with PIM-SM.
Which feature can you implement so that devices can dynamically learn the RP?

A. Auto-RP
B. BSR
C. BIDIP-PIM
D. SSM

正解：A

解説：
Section: Services

質問 # 107
Refer to the exhibit:

This configuration is being applied on an IOS XR router.
Which statement about this configuration is true?

A. It is used to create a subscription to specify the streaming interval
B. It is used to identify MIB entries and has a list of YANG models
C. It is used to create a sensor-group and has a list of YANG models for streaming
D. It is used to identify traps for SNMP polling

正解：C

質問 # 108
Refer to the exhibits:

R1 and R2 are directly connected and IS-IS routing has been enabled between R1 and R2 R1 message periodically Based on this output, which statement is true?

A. IS-IS neighbor authentication is failing for Level 2 first and then for Level 1 PDUs
B. 1S-1S neighbor authentication is failing for Level 1 and Level 2 PDUs .
C. IS-IS neighbor authentication is failing for Level 2 PDUs only.
D. IS-IS neighbor authentication is failing for Level 1 PDUs only

正解：D

質問 # 109
......

合格させるCisco 350-501プレミアムお試しセットテストエンジンPDFで無料問題集セット：https://jp.fast2test.com/350-501-premium-file.html

350-501試験情報と無料練習テスト：https://drive.google.com/open?id=1lDIymAYEwvlj85R4h7CGwAgHgj_oSR6N