2023年最新の有効な350-501リアル試験問題（更新された）100%問題集と練習試験合格させます [Q185-Q200]

2023年最新の有効な350-501リアル試験問題（更新された）100%問題集と練習試験合格させます

[更新されたのは2023年]Cisco 350-501問題準備には無料サンプルのPDF

Cisco 350-501 認定試験の出題範囲：

トピック	出題範囲
トピック 1	BGP-TTL Security And Protocol Authentication Transport Technologies (Optical, Xdsl, DOCSIS, TDM, And Xpon)
トピック 2	Describe The Role Of Network Services Orchestration (NSO) Interpret An External Script To Configure A Cisco Device Using A REST API
トピック 3	Compare Agent Vs. Agentless Configuration Management Tools, Such As Chef, Puppet, Ansible, And Saltstack
トピック 4	Core Architectures (Metro Ethernet, MPLS, Unified MPLS, SR) ISIS And OSPF Extensions LDP Session Protection
トピック 5	Describe The High-Level Principles And Benefits Of A Data Modeling Language, Such As YANG
トピック 6	Route Advertisement (IS-IS, OSPF, BGP) Congestion Avoidance, Traffic Policing, And Shaping
トピック 7	Describe Qos Architecture, NFV Infrastructure, MPLS QOS Models (Pipe, Short Pipe, And Uniform)
トピック 8	Implement High Availability Troubleshoot Routing Protocols Describe Ipv6 Transition (NAT44, NAT64, 6RD, MAP, And DS Lite)
トピック 9	Implement Data Plane Security Describe Service Provider Virtualization Diffserv And Intserv Qos Models
トピック 10	Implement BGP (V4 And V6 For IBGP And EBGP) Describe BGP Path Selection Algorithm
トピック 11	Configure And Verify NETCONF And RESTCONF Configure And Verify Netflow IPFIX Classification And Marking
トピック 12	Shared Services (Extranet And Internet) VLAN Tag Manipulation Ethernet Services (E-Line, E-Tree, E-Access, E-LAN)
トピック 13	Configure Dial-In Out Telemetry Streams Using Grpc Implement OSPF (V2 And V3) Describe VPN Services

質問 185
Which statement describes the advantage of a Multi Layer control plane?

A. It automatically provisions monitors, and manages traffic across Layer 0 to Layer 3
B. It supports dynamic wavelength restoration in Layer 0
C. It provides multivendor configuration capabilities for Layer 3 to Layer 1
D. It minimizes human error configuring converged networks

正解: C

質問 186
Refer to the exhibit. This output is included at the end of an output that was provided by a device using NETCONF.
What does the code show?

A. It shows NETCONF uses remote procedure calls.
B. It shows the hostname of the device as rpc-reply
C. It shows that the full configuration is being modeled by VANG
D. It shows that the running configuration is blank

正解: A

質問 187
Refer to the exhibit.

An engineer is configuring path selection on router R1 for two ASNs as shown. Which additional task must the engineer perform on Router 1 so that all outbound traffic utilizes the link between R1 and R3 to reach ASN
4567?

A. Configure an AS path prepend on the peer to ASN 4567.
B. Configure a high med on the peer to ASN 4567.
C. Configure a low weight on the peer to ASN 4567.
D. Configure a high weigh! on ihe peer to ASN 4567.

正解: D

質問 188
Refer to the exhibit:

R1 is connected to two service providers and is under a DDoS attack Which statement about this design is true if uRPF in strict mode is configured on both interfaces'?

A. R1 accepts source addresses on interface gigabitethernet0/1 that are private addresses
B. R1 drops destination addresses that are routed to a null interface on the router
C. R1 drops all traffic that ingresses either interface that has a FIB entry that exits a different interface
D. R1 permits asymmetric routing as long as the AS-RATH attribute entry matches the connected AS

正解: C

質問 189
Refer to the exhibit. In the service provider network, routers PE1, PE2, and PE4 have access to the internet and provide access to customer networks. Router PE3 is used for access to other customer systems. In accordance with a new SLA, an engineer is updating settings on this network so that router CE1 accesses the internet via PE1 instead of PE2. Which two tasks must the engineer perform to complete the process? (Choose two.)

A. On PE2, configure the CE1 VRF with import route target 101:101.
B. On PE1, configure the internet VRF with import route target 102:102.
C. On PE2, configure the internet VRF with import route target 102:102.
D. On PE1 and PE4, configure the internet VRF with import route targets 102:102 and 104:104.
E. On PE2 and PE3, configure the internet VRF with import route target 101:101.

正解: A,B

質問 190
Refer to the exhibit.

An engineer wants to determine which paths are best, second best, third best, and fourth best. Drag and drop the peer addresses on the left to the corresponding BGP best-path selection order on the right.

正解:

解説:

Explanation
Best - 50.50.50.2
2nd Best - 40.40.40.2
3rd Best - 20.20.20.2
44th Best - 30.30.30.2

質問 191
What is the role of NSO?

A. Controls the turn-up of a device.
B. Maintains data storage.
C. Provides network monitoring services for Layer 3 devices.
D. Provides public cloud services for customers that need Internet access.

正解: A

質問 192
Drag and drop the NAT64 descriptions from the left onto the correct NAT64 types on the right.

正解:

解説:

Explanation:
Stateful (It has 1: N translation, It uses address overloading, It conservers IPv4 addresses) Stateless (It is limited on the number of endpoints, It mandates IPv4-translatable IPv6 address allocation)

質問 193
Which action enables an IPv6 multicast router on a subnet with locally attached receivers to quickly determine if there is a need to send traffic for a certain multicast group out to that subnet?

A. Decrease the ICMPv4 multicast query timer.
B. Adjust the MLD report interval on the router.
C. Activate IGPMv3 snooping and fast-leave.
D. Enable the MLDv2 explicit-tracking feature.

正解: C

質問 194
A network engineer is configuring a BGP route policy for the SUBNET prefix set. Matching traffic must be dropped, and other traffic must have its MED value set to 400 and community 4:400 added to the route. Which configuration must an engineer apply?

A. Option D
B. Option C
C. Option A
D. Option B

正解: C

質問 195
Refer to the exhibits:

R1 and R2 are directly connected and IS-IS routing has been enabled between R1 and R2 R1 message periodically Based on this output, which statement is true?

A. IS-IS neighbor authentication is failing for Level 2 PDUs only.
B. IS-IS neighbor authentication is failing for Level 1 PDUs only
C. 1S-1S neighbor authentication is failing for Level 1 and Level 2 PDUs .
D. IS-IS neighbor authentication is failing for Level 2 first and then for Level 1 PDUs

正解: B

質問 196
Refer to the exhibit. An organization s network recently experienced several significant outages due to device failures. The network administrator just moved the network devices to a new central data center, and packets are switched using labels. The administrator Is now implementing NSF on the network to reduce potential risk factors in the event of another outage. Which task must the administrator perform on each router as part of the process?

A. Implement Graceful Restart to mitigate the delay in MPLS LDP synchronization when the IGP starts up.
B. Implement MPLS to forward packets while the RIB updates after a faliover.
C. Remove route filtering to speed repopulation of the link-state database
D. Copy the router s existing state information and share the file with its peers to enable BGP soft resets

正解: A

質問 197
Which configuration enables BGP FlowSpec client function and installation of policies on all local interfaces?
A)

B)

C)

D)

A. Option C
B. Option D
C. Option A
D. Option B

正解: A

質問 198
Which statement about the overlay VPN model is true?

A. The overlay model provides the ability to reduce the amount of routing state that core routers need to hold to meet the scalability requirements compared to the MPLS VPN model.
B. The overlay model does not scale to the same size as the MPLS VPN model.
C. The overlay model demands a lot from provisioning because when adding one customer site, it demands many configuration changes at many other routers on the provider side.
D. The overlay model provides privacy and isolation between the different customers by using packet filters that control the data to and from the customer routers.

正解: A

質問 199
An engineer is setting up overlapping VPNs to allow VRF ABC and XYZ to communicate with VRF CENTRAL but wants to make sure that VRF ABC and XYZ cannot communicate. Which configuration accomplishes these objectives?