[2025年10月] 試験UiPath-ADPv1最新ブレーン専門問題集はここ
無料で使えるUiPath-ADPv1試験問題集試験点数を伸ばそう
質問 # 20
How should the computation of the signature be done for client apps that receive Orchestrator requests and need to check their authenticity?
Instructions: Drag the Description found on the left and drop on the correct Step Sequence found on the right.
正解：
解説：
質問 # 21
You are building an automation for a CRM system where customer data from various sources needs to be reviewed and consolidated into a single record before being entered into the system.
What is the best strategy for handling the data?
- A. Consolidate all customer data into a single entity that can be reviewed and processed before final entry into the CRM system.
- B. Create individual variables for each customer data field and manually merge them in the final step before entering the CRM system.
- C. Store the customer data in multiple files, then manually transfer the information between workflows.
- D. Use attended workflows to review each piece of customer data separately before manually entering it into the CRM system.
正解：A
解説：
The best approach for data consolidation is toaggregate all customer data into a single entity or structure, such as a dictionary, object, or entity (especially when usingData Service). This allows forcentralized review, validation, and manipulationbefore being processed into the CRM system. It ensuresdata consistency, reusability, and easier error handling.
Reference:UiPath Best Practices Guide > Data Handling > Structured Data Management
質問 # 22
Given the following conditional breakpoint with count = 0
Conditional breakpoint settings:
How many limes will UiPath be displayed in the Output panel before the process goes into a Paused state in Debug mode?
- A. 0
- B. 1
- C. 2
- D. 3
正解：C
質問 # 23
Which of the following best describes the Alerts panel?
- A. A panel that displays summaries of the alerts you subscribed to, received as error reports every ten minutes, or as daily reports.
- B. A panel that displays a more comprehensive list of all alerts.
- C. A panel that displays alerts as they occur.
- D. A panel that displays the most severe five alerts, accessible from the Alerts bell.
正解：A
解説：
The Alerts panel in UiPath is a feature designed to notify users about different types of alerts or events that occur within the UiPath ecosystem, especially within the Orchestrator. These can range from job failures, trigger notifications, to queue item alerts.
The best description of the Alerts panel, considering typical functionality within such systems, would be:
B: A panel that displays summaries of the alerts you subscribed to, received as error reports every ten minutes, or as daily reports.
This option suggests that the Alerts panel provides a curated view of alerts based on subscriptions, which can be configured for error reports at specified intervals or for aggregate daily reports, making it a more proactive and user-specific feature.
The other options either describe a panel with too broad a scope (A), suggest real-time alerting without the context of user subscriptions (C), or limit the display to only the most severe alerts without mention of subscription or reporting features (D).
質問 # 24
You have to create a testcase for an attended RPA process. At some point, the attended process asks the user to input a specific token for the execution to continue, as shown in the screenshot below.
What testing concept (included in UiPath.Testing.Activities) can be used to isolate and replace the input part, without modifying the original workflow?
- A. RPA Testing
- B. Application Testing
- C. Mock Testing
- D. Data-Driven Testing
正解：C
解説：
Mock Testing is a concept that allows you to isolate and replace the input part of an attended RPA process, without modifying the original workflow. Mock Testing enables you to create a mock file of your workflow by selecting Mock workflow under test in the Create Test Case window. This creates a copy of your workflow with the name workflowName_mock and stores it in Project > Mocks. This folder mirrors the source workflow file tree structure. In the mock file, you can use the Surround with mock option to insert a mock activity that replaces the original input activity. For example, instead of asking the user to input a specific token, you can use a mock activity that assigns a predefined token value to a variable. This way, you can test the specific function of the process without having to enter the token manually every time. Mock Testing is useful for tests that have permanent effects in production or require special resources1.
The other options are incorrect because:
* Option A is incorrect because Application Testing is not a concept that can be used to isolate and replace the input part of an attended RPA process, without modifying the original workflow. Application Testing is a type of testing that focuses on verifying the functionality, usability, performance, and security of an application2.
* Option B is incorrect because Data-Driven Testing is not a concept that can be used to isolate and replace the input part of an attended RPA process, without modifying the original workflow. Data- Driven Testing is a type of testing that uses external data sources, such as Excel files or databases, to provide input values and expected results for the test cases3.
* Option D is incorrect because RPA Testing is not a concept that can be used to isolate and replace the input part of an attended RPA process, without modifying the original workflow. RPA Testing is a type of testing that involves using robots to automate the testing of other robots or applications.
References:
* Studio - Mock Testing - UiPath Documentation Portal
* Application Testing - UiPath Documentation Portal
* Data-Driven Testing - UiPath Documentation Portal
* [RPA Testing - UiPath Documentation Portal]
質問 # 25
How can a process be converted from a toreground process to a background process?
- A. A process may be turned into a Background Process by adding a "Background" tag to the process name as long as it does/does not contain Ul interaction. You need to go to the Project Settings and modify the name of the process.
- B. A process may be turned into a Background Process as long as it does not contain persistence activities.
You need to go to the Project Settings window and set the Supports Persistence toggle to No. - C. A process may be turned into a Background Process as long as it does not contain activities with Ul interaction You need to go to the Project Settings window and set the Starts in Background toggle to Yes.
- D. A process may be turned into a Background Process by just deleting the UiAutomation package dependency as long as it does/does not contain Ul interaction
正解：C
解説：
Converting a process into a background process in UiPath is accomplished by ensuring the process does not contain UI interaction and setting the "Starts in Background" toggle to Yes in the Project Settings. This is crucial for processes meant to run without user interface interaction.
質問 # 26
Which activity from the Microsoft 365 package should be used to retrieve the Driveitem ID for a Sharepoint URL?
- A. Get File/Folder
- B. Get Group
- C. Download File
- D. Share File/Folder
正解：A
解説：
The Get File/Folder activity from the Microsoft 365 package should be used to retrieve the Driveitem ID for a Sharepoint URL. This activity allows you to get information about a specific file or folder from OneDrive or SharePoint, such as the name, size, ID, URL, etc. You can specify the file or folder to be retrieved by browsing, entering the ID, or entering the URL1.
To get the Driveitem ID for a Sharepoint URL, you need to do the following steps:
Use the Get File/Folder activity and select the Enter Url option in the File or folder to get property.
Enter the Sharepoint URL of the file or folder in the File or folder Url property. For example, 5.
Create a variable of type Microsoft.Graph.DriveItem in the Output property. For example, driveItem.
Use an Assign activity to get the Driveitem ID from the output variable. For example, driveItemId = driveItem.Id.
The other options are not activities that can be used to retrieve the Driveitem ID for a Sharepoint URL, because they either do not have an output property that returns the Driveitem ID, or they do not have an input property that accepts the Sharepoint URL. For example:
The Get Group activity gets information about a specific group from Microsoft 365, such as the name, ID, description, etc. It does not have an output property that returns the Driveitem ID, nor an input property that accepts the Sharepoint URL2.
The Share File/Folder activity shares a file or folder with the specified recipients. It does not have an output property that returns the Driveitem ID, but only the sharing link and the expiration date3.
The Download File activity downloads a file from OneDrive or SharePoint to a local folder. It does not have an output property that returns the Driveitem ID, but only the local path of the downloaded file4.
References:
1: Get File/Folder - UiPath Activities 2: Get Group - UiPath Activities 3: Share File/Folder - UiPath Activities 4: Download File - UiPath Activities
質問 # 27
A developer has created a variable of type List of Strings named "Users_List", and initialized it with an empty list: "Users_List = new List(Of String)".
What is printed in the log message after the following Invoke Code is executed?
- A. System Argument Exception is thrown
- B. 0
- C. Object reference not set to an instance exception is thrown
- D. 1
正解：B
解説：
The screenshot shows an "Invoke Code" activity in UiPath with the following VB.NET code:
Users_List.Add("User1")
Users_List.Add("User2")
According to the given information, the "Users_List" variable is a List of Strings that has been initialized with an empty list before the Invoke Code activity is run. The code within the Invoke Code activity is adding two strings: "User1" and "User2" to the "Users_List".
The Log Message activity following the Invoke Code is attempting to log the count of items in "Users_List", which would be the number of elements contained in the list at that time.
Given the steps that have been described, after the Invoke Code activity has run, the "Users_List" will contain two elements ("User1" and "User2"). Therefore, the log message will print the count of items in the list, which is:
B: 2
So the correct answer is B, as the "Users_List" will have two elements and Users_List.Count will return the number 2.
The Invoke Code activity is used to execute VB.NET or C# code within a UiPath workflow1. The activity has the following properties:
* Code: The code that is to be executed. This field supports only strings and String variables1.
* Language: The language that the code is written in. The available options are VBNet and CSharp1.
* Arguments: The parameters that can be passed to and from the code1.
In this question, the developer has created a variable of type List of Strings named "Users_List", and initialized it with an empty list: "Users_List = new List(Of String)". Then, the developer has used the Invoke Code activity to execute the following code:
Users_List.Add("User1") Users_List.Add("User2")
This code adds two items ("User1" and "User2") to the "Users_List" variable. After the Invoke Code activity, the developer has used the Log Message activity to print the count of items in the "Users_List" variable, using the expression "Users_List.Count.ToString". This expression returns the number of items in the list as a string2. Therefore, the log message will print "2", as there are two items in the list
質問 # 28
Given the following list of arguments:
and the following code:
What is the value that will be displayed in the Output Panel at the end of the sequence below:
- A. 0
- B. 1
- C. 2
- D. 3
正解：B
解説：
The value that will be displayed in the Output Panel at the end of the sequence is 9. This is because the code in the Invoke Code activity is looping through the array in_numArray and setting the variable out_numVar to the highest value in the array. The array in_numArray has the values {1, 2, 7, 9, 4} as shown in the list of arguments. The variable out_numVar is initialized to 0. The For loop iterates from 0 to the upper bound of the array, which is 4. In each iteration, the If condition checks if the current element of the array is greater than the current value of out_numVar. If it is, then out_numVar is assigned to the current element of the array.
Otherwise, out_numVar remains unchanged. Therefore, after the first iteration, out_numVar becomes 1. After the second iteration, out_numVar becomes 2. After the third iteration, out_numVar becomes 7. After the fourth iteration, out_numVar becomes 9. After the fifth iteration, out_numVar remains 9, since 4 is not greater than 9. The Write Line activity outputs the value of out_numVar to the console, which is
9. References: Invoke Code
質問 # 29
A sales department is using UiPath attended automation to handle incoming sales requests through multiple forms and applications. They want to ensure the automation runs in parallel with other tasks.
What feature of trigger-based attended automation will best support this?
- A. Triggers that only run sequentially, ensuring that workflows never overlap with one another.
- B. Triggers that monitor user input but cannot handle multiple workflows at the same time.
- C. Triggers based on application events but limited to one automation process at a time.
- D. Triggers that can run workflows intermittently, either one time, in sequence, or simultaneously.
正解：D
解説：
Intrigger-based attended automation, triggers can respond toapplication events, keyboard shortcuts, or UI interactions, and theycan execute workflows in parallel, eitheronce, sequentially, or simultaneously. This capability allows multiple automations to be triggered and run concurrently, which is ideal for departments like sales handling multiple requests in real-time.
Reference:UiPath Studio Guide > Attended Automation > Trigger-Based Automation
質問 # 30
When using Profile Execution to analyze performance, what should you keep in mind about the data generated during debugging versus data generated during production runs?
- A. Profiling data from debugging sessions will always be the same as production runs.
- B. Profiling data is only available during production runs, not debugging sessions.
- C. Profiling data is stored only for debugging sessions, not production runs.
- D. Profiling data from debugging sessions may differ from production runs.
正解：D
解説：
TheProfile Executiontool in Studio can be used in bothRunandDebugmodes. However, it's important to note thatprofiling data may vary between debugging and production runsdue to differences in execution behavior (e.g., breakpoints, step-by-step execution, and extra logging during debugging).
Reference:UiPath Studio Guide > Debugging > Profile Execution
質問 # 31
A developer needs to design a process using the REFramework. but without Orchestrator Queues. Which Is the correct order of actions the developer needs to do in the Get Transaction Data state in this case?
- A. 1. Remove the Get Transaction Item activity from GetTransactionData workflow.
2. Add a Read Row activity in GetTransactionData workflow to read the data from a local Excel file.
3. Add the logic required to read the data source only one time.
4. Add the logic required to retrieve only one row from read data each time.
5. Add the logic required to check if all rows/transaction items from the read data have been processed. - B. 1. Remove the Get Transaction Item activity from GetTransactionData workflow.
2. Add a Read Row activity in GetTransactionData workflow to read the data from a local Excel file.
3. Add the logic required to read the data source only one time.
4. Add the logic required to check if all rows/transaction items from the read data have been processed - C. 1. Remove the Get Transaction Item activity from GetTransactionData workflow.
2. Add a Read Range activity in GetTransactionData workflow to read the data from a local Excel file.
3. Add the logic required to read the data source only one time.
4 Add the logic required to retrieve only one row from read data each time
5. Add the logic required to check if all rows/transaction items from the read data have been processed. - D. 1. Remove the Get Transaction Item activity from GetTransactionData workflow
2. Add a Read Range activity in GetTransactionData workflow to read the data from a local Excel file.
3. Add the logic required to read the data source only one time.
4. Add the logic required to retrieve only one row from read data each time.
正解：C
解説：
* The correct order of actions in the Get Transaction Data state is:
* Remove the Get Transaction Item activity from the GetTransactionData workflow.
* Add a Read Range activity in the GetTransactionData workflow to read the data from a local Excel file.
* Add the logic required to read the data source only one time.
* Add the logic required to retrieve only one row from read data each time.
* Add the logic required to check if all rows/transaction items from the read data have been processed.
* This sequence ensures that the data is read once, processed row by row, and checks for completion.
質問 # 32
Which of the options below is not an action in Test Explorer?
- A. Run Failed Test Cases
- B. Run Selected
- C. Run Passed Test Cases
- D. Run All In View
正解：C
解説：
The Test Explorer panel in UiPath Studio shows information relevant to test automation, such as test cases, test results, and activity coverage1. You can use the Test Explorer toolbar to filter test results based on result state, and to run or debug test cases using various options1. According to the UiPath documentation12, the available actions in Test Explorer are:
Refresh: Refresh the information shown in the Test Results panel.
Clear execution results: Clear all execution results shown in the Test Explorer Panel.
Run All in View: Run tests that are currently in view through all filters.
Run All: Run all test cases and workflows.
Run Selected: Run only selected test cases and workflows.
Run Failed Test Cases: Run only failed test cases.
Debug Selected: Debug only selected test cases and workflows.
Debug Failed Test Cases: Debug only failed test cases.
Repeat Last Test Run: Run the latest test.
Passed Test Cases: Show only test cases that have passed.
Failed Test Cases: Show only test cases that have failed.
Not Executed Test Cases: Show only test cases that have not been executed.
Filter by Covered/Uncovered Activities: Choose whether to show in the Designer panel the activities that have been covered during the execution.
Filter by Test Cases/Workflows: Choose what to show in the Test Explorer panel.
Search Tests: Use the search function to look for test case names.
As you can see, there is no action called Run Passed Test Cases in Test Explorer, so this is the correct answer to the question.
References:
Studio - Test Explorer - UiPath Documentation Portal
Studio - Test Activities - UiPath Documentation Portal
Studio - Test Explorer - UiPath Documentation Portal
質問 # 33
What is the output type returned when using a Get Test Data Queue Item activity?
- A. Dictionary
- B. Queueltem
- C. Object
正解：B
解説：
The output type returned when using a Get Test Data Queue Item activity is QueueItem. The Get Test Data Queue Item activity is an activity that allows the developer to retrieve a test data queue item from a test data queue in Orchestrator. A test data queue is a special type of queue that is used to store and manage test data for automation testing purposes. A test data queue item is a data object that contains the test data and the expected results for a test case. The Get Test Data Queue Item activity has an output property called TestDataQueueItem, which returns the test data queue item as a QueueItem type. The QueueItem type is a class that represents a queue item in Orchestrator. The QueueItem type has various properties and methods that allow the developer to access and manipulate the data and the status of the queue item. References: [Get Test Data Queue Item], [QueueItem Class]
質問 # 34
What role do Triggers play in the UiPath Integration Service?
- A. Manage connections between UiPath Studio and third-party applications.
- B. Provide a mechanism for starting processes on a scheduled basis from Orchestrator.
- C. Assist in the creation of automation projects by providing event-based activities.
- D. Provide a mechanism for subscribing to specific events from third-party applications, automatically starting processes in Orchestrator.
正解：D
質問 # 35
Under what conditions will a trigger be automatically disabled upon failure in Integration Service?
- A. When the job is not able to start after 11 attempts for a single event or the job does not start for the last
100 events. - B. When the job is not able to start after 3 attempts for a single event or the job does not start for the last
25 events. - C. When the job is not able to start after 20 attempts for a single event or the job does not start for the last
200 events. - D. When the job is not able to start after 5 attempts for a single event or the job does not start for the last
50 events.
正解：B
解説：
In UiPath Integration Service, a trigger will be automatically disabled upon failure under specific conditions to prevent continuous failure and unnecessary resource consumption. This typically happens when the job associated with the trigger fails to start after a predefined number of attempts for a single event, or when it consistently fails to start across a series of events. The condition of failing to start after 3 attempts for a single event or not starting for the last 25 events is designed to safeguard against persistent issues that could disrupt the automation flow or lead to resource wastage.References:
* UiPath Integration Service Documentation: Triggers and Events
質問 # 36
What is the recommended approach for handling tabular data when building a REFramework transactional project in UiPath?
- A. Utilize a DataTable variable to store and process the tabular data.
- B. Use separate variables to store each column of the tabular data.
- C. Save the tabular data in multiple CSV files for easier manipulation.
正解：A
解説：
D Implement custom activities to handle the tabular data
質問 # 37
How would you define a linear process in UiPath?
- A. The steps of the process are performed multiple times, but each time different data items are used.
- B. The steps of the process repeat multiple times over different data items. However, the automation design is such that each repeatable part processes independently.
- C. The process steps are performed only once. If the need is to process additional data, then the automation must execute again.
- D. The steps of the process refer to the execution of steps in a sequential manner, where each subsequent step depends on the successful completion of the previous step.
正解：C
質問 # 38
A developer wants to add items to a list of strings using the Invoke Method activity. The list is declared as follows:
The Invoke Method activity has the following properties:
The Parameters property is as follows:
Based on the information shown in the exhibits what is the outcome of the Invoke Method activity?
- A. Colors will contain an item with an empty value.
- B. Colors will contain an item with the value "Yellow".
- C. An exception will be thrown.
- D. Colors will contain an item with the value "Colors: Yellow".
正解：B
解説：
The Invoke Method activity is used to invoke a method of a class or an object. In this case, the developer wants to add items to a list of strings using the Invoke Method activity. The list is declared as follows:
Dim Colors As New List(Of String)
This means that the list is named Colors and it can store strings. The Invoke Method activity has the following properties:
TargetType: System.Collections.Generic.List`1[System.String]. This means that the target type is a generic list of strings.
TargetObject: Colors. This means that the target object is the list named Colors.
MethodName: Add. This means that the method name is Add, which is a method of the list class that adds an item to the end of the list.
Parameters: In, String, Yellow. This means that the parameter direction is In, which means that the value is passed to the method. The parameter type is String, which means that the value is a string. The parameter value is Yellow, which means that the value is the string "Yellow".
Based on the information shown in the exhibits, the outcome of the Invoke Method activity is that Colors will contain an item with the value "Yellow". This is because the Invoke Method activity will add "Yellow" to the list of strings declared as Colors.
質問 # 39
You have to create a testcase for an attended RPA process. At some point, the attended process asks the user to input a specific token for the execution to continue, as shown in the screenshot below.
What testing concept (included in UiPath.Testing.Activities) can be used to isolate and replace the input part, without modifying the original workflow?
- A. RPA Testing
- B. Application Testing
- C. Mock Testing
- D. Data-Driven Testing
正解：C
解説：
Mock Testing is a concept that allows you to isolate and replace the input part of an attended RPA process, without modifying the original workflow. Mock Testing enables you to create a mock file of your workflow by selecting Mock workflow under test in the Create Test Case window. This creates a copy of your workflow with the name workflowName_mock and stores it in Project > Mocks. This folder mirrors the source workflow file tree structure. In the mock file, you can use the Surround with mock option to insert a mock activity that replaces the original input activity. For example, instead of asking the user to input a specific token, you can use a mock activity that assigns a predefined token value to a variable. This way, you can test the specific function of the process without having to enter the token manually every time. Mock Testing is useful for tests that have permanent effects in production or require special resources1.
The other options are incorrect because:
Option A is incorrect because Application Testing is not a concept that can be used to isolate and replace the input part of an attended RPA process, without modifying the original workflow. Application Testing is a type of testing that focuses on verifying the functionality, usability, performance, and security of an application2.
Option B is incorrect because Data-Driven Testing is not a concept that can be used to isolate and replace the input part of an attended RPA process, without modifying the original workflow. Data-Driven Testing is a type of testing that uses external data sources, such as Excel files or databases, to provide input values and expected results for the test cases3.
Option D is incorrect because RPA Testing is not a concept that can be used to isolate and replace the input part of an attended RPA process, without modifying the original workflow. RPA Testing is a type of testing that involves using robots to automate the testing of other robots or applications.
References:
Studio - Mock Testing - UiPath Documentation Portal
Application Testing - UiPath Documentation Portal
Data-Driven Testing - UiPath Documentation Portal
[RPA Testing - UiPath Documentation Portal]
質問 # 40
What are the primary functions of the UiPath Integration Service?
- A. Enables automation with Ul components, manages API keys, kicks off automations with client-side triggers, provides curated events.
- B. Automates Ul design, manages API connections, provides limited activities and events, simplifies automation design.
- C. Enables automation with a library of connectors, manages connections easily with standardized authentication, kicks off automations with server-side triggers or events, provides curated activities and events, simplifies automation design.
- D. Enables automation with API integration, manages connections with user-provided authentication, kicks off automations based on application-specific triggers, simplifies automation design with the help of third-party libraries.
正解：C
質問 # 41
Which of the following options is correct about a State Machine layout?
- A. Can have multiple initial states and only one final state.
- B. Can have only one initial state and only one final state.
- C. Can have multiple initial states and multiple final states.
- D. Can have only one initial state and multiple final states.
正解：D
解説：
The correct option about a State Machine layout is that it can have only one initial state and multiple final states. A State Machine is a type of workflow that consists of a set of states, transitions, and triggers. A state represents a stage of the process, a transition represents a change from one state to another, and a trigger represents a condition or an event that activates a transition. A State Machine can have only one initial state, which is the starting point of the workflow, and one or more final states, which are the end points of the workflow. A State Machine can also have intermediate states, which are the states between the initial and the final states. A State Machine can have multiple paths and branches, depending on the logic and the triggers of the workflow.
質問 # 42
......
UiPath UiPath-ADPv1 認定試験の出題範囲：
| トピック | 出題範囲 |
|---|---|
| トピック 1 |
|
| トピック 2 |
|
| トピック 3 |
|
| トピック 4 |
|
心強いUiPath-ADPv1のPDF問題集はUiPath-ADPv1問題：https://jp.fast2test.com/UiPath-ADPv1-premium-file.html
2025年最新の実際に出るUiPath-ADPv1問題集には試験のコツがあるPDF試験材料：https://drive.google.com/open?id=1zDeibej7NtdxBIK_kqAqIxgESV6f6Rjq