[2025年06月13日] 365日無料更新201知能問題集をゲット
ベスト品質のF5 201試験問題
F5 201認定試験は、ネットワーク管理者、システム管理者、セキュリティの専門家、およびF5 BIG-IP製品の管理を担当するすべての人にとって理想的な認定です。また、ネットワークインフラストラクチャとセキュリティの分野で自分のキャリアを前進させようとしている人にとっても大きな認証です。
F5 201（BIG-IP管理者）認定試験は、アプリケーション配信ネットワーキング技術の主要なプロバイダーであるF5 Networksが提供するプロフェッショナルレベルの認定試験です。この認定試験は、F5 BIG-IPアプリケーション配信コントローラーを扱うネットワーク管理者のスキルと知識を検証するために設計されています。F5 201認証試験に合格することは、個人が複雑なF5 BIG-IP環境を管理、構成、トラブルシューティングできる能力を証明するものです。
質問 # 110
Refer to the exhibit.
Which TMSH command generated this output?
- A. tmsh show /sys sync-status
- B. tmsh list /sys sync-status
- C. tmsh show /cm sync status
- D. tmsh list /cm sync-status
正解：C
質問 # 111
Assuming there are open connections through an active system's virtual servers and aEl fo av ielr occurs, by default, what happens to the connections.
- A. LongEllived connections such as Telnet and FTP are maintained,
but shortEllived connections such as HTTP are lost. - B. All open connections are lost, but new connections are initiated by the newly active BIGElIP, resulting in minimal client downtime.
- C. All open connections are maintained.
- D. When persistence mirroring is enabled, open connections are maintained even if a fEl aoilver occurs.
- E. All open connections are lost.
正解：E
質問 # 112
Which action will take place when a failover trigger is detected by the active system.
- A. The standby device will begin processing virtual servers that have failed, but the active device will continue servicing the functional virtual servers.
- B. The standby device also detects the failure and assumes the active role.
- C. The active device will take the action specified for the failure.
- D. The active device will wait for all connections to terminate and then failElover.
正解：C
質問 # 113
When can a single virtual server be associated with multiple profiles?
- A. Unlimited. Profiles can work together in any combination to ensure that all traffic types are supported in a given virtual server.
- B. Rarely. One combination, using both the TCP and HTTP profile does occur, but it is the exception.
- C. Never. Each virtual server has a maximum of one profile.
- D. Often. Profiles work on different layers and combining profiles is common.
正解：D
質問 # 114
A BIG-IP Administrator creates a new VLAN on BIG-IP Cluster Member A and attaches an Interface to it.
Although the Auto Config Sync is in place, the new VLAN does NOT show up on Cluster Member B. What should the BIG-IP Administrator do to ensure the new VLAN is configured on each Cluster Member?
- A. Reset the Device Trust of the BIG-IP Cluster on either Cluster Member.
- B. Configure a Default Route for the new VLAN on Cluster Member A.
- C. Configure the new VLAN manually on Cluster Member B.
- D. Enable the Interface that is attached to the new VLAN on Cluster Member A.
正解：C
質問 # 115
A pool of four servers has been partially upgraded for two new servers with more memory and CPU capacity.
The BIG-IP Administrator must change the load balance method to consider more connections for the two new servers. Which load balancing method considers pool member CPU and memory load?
- A. Dynamic Ratio
- B. Round Robin
- C. Least Connection
- D. Ratio
正解：D
質問 # 116
Assume a client's traffic is being processed only by a NAT; no SNAT or virtual
server processing takes place. Also assume that the NAT definition specifies a
NAT address and an origin address while all other settings are left at their defaults.
If the origin server were to initiate traffic via the BIGElIP, what changes, if any,
would take place when the BIGElIP processes such packets.
- A. The source address would not change, but the destination address would be changed to a seEllIfP of the BIGElIP.
- B. The source address would not change, but the destination address would be changed to the NAT address.
- C. The BIGElIP would drop the re quest since the traffic didn arrive destined to the NAT address.The BIGElIP would drop the request since the traffic didn. arrive destined to the NAT address.
- D. The source address would be changed to the NAT address and destination address would be left unchanged.
正解：D
質問 # 117
A 8IG-IP Administrator configures a Virtual Server to load balance traffic between 50 webservers for an ecommerce website Traffic is being load balanced using the Least Connections (node) method.
The webserver administrators report that customers are losing the contents from their shopping carts and are unable to complete their orders.
What should the BIG-IP Administrator do to resolve the issue?
- A. Change Load Balancing method to Ratio (node)
- B. Change Load Balancing method to Ratio (member)
- C. Change Default Persistence Profile setting to cookie
- D. Change Default Persistence Profile setting to sipjnfo
正解：C
質問 # 118
A VLAN has the following objects configured:
Self-IP 10.10.10.100 with port lockdown set to Allow default
Virtual server 10.10.10.100:443 with UDP profile enabled
Virtual server 10.10.10.0/24 port forwarding virtual server
Global destination NAT forwarding 10.10.10.100 to internal server 172.168.10.100 Which object will process this request when https://10.10.10.100 is entered into a browser?
- A. virtual server 10.10.10.100.443 with UDP profile enabled
- B. virtual server 10.10.100/24 port o forwarding virtual server
- C. global destination NAT forwarding 10.10.10.100 to internal server 172.168.10.100
- D. self-IP 10.10.10.100 with port lockdown set to Allow default
正解：D
質問 # 119
Which method is recommended for creating a new user from the CLI?
- A. Run f5adduser username' then 'f5passwd username' from bash or tmsh
- B. edit bigip.conf to add the new user and the user's clear-text password
- C. Run tmsh create auth user username prompt for password' from bash
- D. Run useradd username' then 'passwd username' from bash tmsh
正解：C
解説：
Reference:
The f5adduser commands were removed and tmsh is the recommended way to create users.
https://support.f5.com/csp/article/K11677
質問 # 120
A BIG-IP Administrator sees the following error message in /var/log/ltm diskmonitor: *******; Disk partition shared has less than 30$ free Which section of the Configuration Utility should the BIG-IP Administrator access to investigate this error message?
- A. Statistics > Analytics
- B. Statistics > Module Statistics > System
- C. System > Disk Management
- D. System > File Management
正解：C
質問 # 121
How is MAC masquerading configured?
- A. Specify the desired MAC address for each floating selfIP address for which you want this feature enabled.
- B. Specify the desired MAC address for each VLAN for which you want this feature enabled.
- C. Specify the desired MAC address for each VLAN on the active system and synchronize the systems.
- D. Specify the desired MAC address for each selfIP address for which you want this feature enabled.
正解：B
質問 # 122
A node is a member of various pools and hosts different web applications. If a web application is unavailable, the BIG-IP appliance needs to mark the pool member down for that application pool. What should a BIG-IP Administrator deploy at the pool level to accomplish this?
- A. A combination of ICMP + TCP monitor
- B. A UDP monitor with a custom interval/timeout
- C. A TCP monitor with a custom interval/timeout
- D. An HTTP monitor with custom send/receive strings
正解：D
解説：
Requiring all traffic to be HTTPS access requires HTTP requests to be redirected directly to HTTPS.
質問 # 123
A BIG-IP Administrator is working with a BIG-IP device and discovers that one of the Interfaces on a Trunk is DOWN.
What is the reason for this Interface status?
- A. The media speed of the interface has NOT been set
- B. The switch is NOT connected to the Interface
- C. There is NO default route configured for this trunk
- D. There is NO transceiver installed on the Interface
正解：B
質問 # 124
A virtual server is listening at 10.10.1.100:80 and has the following
iRule associated with it: when HTTP_REQUEST { if { [HTTP::header UserElAgent] contains "MSIE" } { pool MSIE_pool } else { pool Mozilla_pool } If a user connects to http://10.10.1.100/foo.html and their browser does not specify a UserElAgent, which pool will receive the request.
- A. None. The request will be dropped.
- B. Mozilla_pool
- C. MSIE_pool
- D. Unknown. The pool cannot be determined from the information provided.
正解：B
質問 # 125
......
F5 201（BIG-IP管理者）認定試験に備えるには、候補者はネットワーキングの概念とテクノロジーを強く理解し、F5製品とソリューションでの作業経験が必要です。この試験は、80の複数選択の質問で構成されており、完了するのに90分かかります。候補者は、認定を獲得するために69％の合格スコアを達成する必要があります。認定されると、個人はF5ソリューションの管理と管理に関する専門知識を実証でき、新しい雇用機会とキャリアの進歩につながる可能性があります。
F5試験練習テスト問題で高得点を目指そう：https://jp.fast2test.com/201-premium-file.html
検証された材料は決まってこれ！201：https://drive.google.com/open?id=1vMszc3k1eCmbWGsGmosHHM-0pC4UmNO4