検証済み201問題集と解答100%合格はここにFast2test
合格させる201試験一発合格保証2025問題集！
質問 # 120
A BIG-IP Administrator needs to find which modules have been licensed for use on the BIG-IP system. In which section of the Configuration Utility can the BIG-IP Administrator find this information?
- A. System > Support
- B. System > Resource Provisioning
- C. System > Platform
- D. System > Services
正解：B
質問 # 121
Which statement is true concerning the default communication between a redundant pair of BIG-IP devices?
- A. Communication between the systems cannot be effected by port lockdown settings.
- B. Regardless of the configuration, some data is communicated between the systems at regular intervals.
- C. Connection mirroring data is shared through the serial fail over cable unless network failover is enabled.
- D. Data for both connection and persistence mirroring are shared through the same TCP connection.
正解：D
質問 # 122
Refer to the exhibit.
A BIG-IP Administrator needs to configure health monitors for a newly configured server pool named Pool_B.
Which health monitor settings will ensure that all pool members will be accurately marked as available or unavailable?
- A. HTTPS, HTTP, FTP, and ICMP, with the Availability Requirement of all health monitors
- B. HTTPS and HTTP with the Availability Requirement of at least one health monitor
- C. HTTPS, HTTP, FTP, and SSH, with the Availability Requirement of at least one monitor
- D. HTTPS, HTTP, FTP, and SSH with the Availability Requirement of all health monitors
正解：C
解説：
From the port, the four members are HTTP, FTP, HTTPS, and SSH applications. If you want to monitor at the same time, you must configure at least one.
質問 # 123
A BIG-IP Administrator is unable to connect to the management interface via HTTPS. What is a possible reason for this issue?
- A. The IP address of the device used to access the management interface is NOT included in the "P Allow" list in the Configuration Utility.
- B. An incorrect management route is specified.
- C. The port lockdown setting is configured to Allow None.
- D. The IP address of the device used to access the management interface is NOT included in the "httpd Allow" list in the CLI.
正解：D
質問 # 124
Refer to the exhibit.
A BIG-IP Administrator needs to fall over the active device. The administrator logs into the Configuration Unity and navigates to Device Management > Traffic Group. However, Force to Standby is greyed out What is causing this issue?
- A. The BIG-IP Administrator is on the Standby Device
- B. The BIG-IP Administrator is NOT logged into command line to tail over
- C. The BIG-IP Administrator is logged in as root
- D. The BIG-IP Administrator is logged in as administrator
正解：A
質問 # 125
When initially configuring the BIGElIP system using the config utility, which two parameters can be set. (Choose two.)
- A. the port lockdown settings for the host via the management port
- B. the IP address of the SCCP
- C. the IP address of the host via the management port
- D. the netmask of the SCCP
- E. the netmask of the host via the management port
- F. the port lockdown settings for the SCCP
正解：C、E
質問 # 126
Refer to the exhibit.
A user attempts to connect to 10.10.10.1.80 using FTP over SSL with an FTPS client. Which virtual server will match and attempt to process the request?
- A. vsjutps
- B. nvfs
- C. vs_ftp
- D. vs_http
正解：C
質問 # 127
A BIGJP Administrator needs to load a UCS file but must exclude the license file. How should the administrator perform this task?
- A. From the GUI, select the UCS file and click restore
- B. From the GUI, select the UCS file, unchcck the license box, and click restore
- C. From the CLI with command(tmos)< tmsh load /sys ucs <ucs filename> no-license
- D. From the CLI with command U tmsh load /$ys ucs <ucs filename> no-license
正解：D
質問 # 128
A BIGElIP has a virtual server at 150.150.10.10:80 with SNAT automap configured. This BIGElIP also has a SNAT at 150.150.10.11 set for a source address range of 200.200.1.0 / 255.255.255.0. All other settings are at their default states. If a client with the IP address 200.200.1.1 sends a request to the virtual server, what is the source IP address when the associated packet is sent to the pool member.
- A. Floating self IP address on VLAN where the packet arrives on the system
- B. 150.150.10.11
- C. Floating self IP address on VLAN where the packet leaves the system
- D. 200.200.1.1
正解：C
質問 # 129
A virtual server is listening at 10.10.1.100:80 and has the following
iRule associated with it: when HTTP_REQUEST { if {[HTTP::uri] ends_with "txt" } { pool pool1 } elseif {[HTTP::uri] ends_with "php" } { pool pool2 } If a user connects to http://10.10.1.100/foo.html, which pool will receive the request.
- A. pool1
- B. Unknown. The pool cannot be determined from the information provided.
- C. None. The request will be dropped.
- D. pool2
正解：B
質問 # 130
What is the purpose of floating self-IP addresses?
- A. to define an address that gives network devices greater flexibility in choosing a path to forward traffic
- B. to define an address that allows either system to initiate communication at any time
- C. to define an address that allows network devices to route traffic via a single IP address
- D. to define an address that grants administrative access to either system at any time
正解：C
質問 # 131
Which three properties can be assigned to nodes. (Choose three.)
- A. priority values
- B. health monitors
- C. ratio values
- D. connection limits
- E. loadElbalancing mode
正解：B、C、D
質問 # 132
What should the 816-IP Administrator provide when opening a new ticket with F5 Support?
- A. Device root password
- B. bigip.license file
- C. QKViewfile
- D. SSL private keys
正解：C
質問 # 133
A BIG-IP Administrator needs to modify a virtual server that web offload web traffic compression tasks from the target server.
Which two profiles must the BIG-IP Administrator apply to a virtual server to enable compression? (Choose two)
- A. Compression profile
- B. Persistence profile
- C. HITP profile
- D. Server SSL profile
- E. Stream profile
正解：A、C
質問 # 134
Active connections to pool members are unevenly distributed. The load balancing method is Least Connections (member) Priority Group Activation is disabled. What is a potential cause of the event distribution?
- A. Persistence profile is applied
- B. SSL Profile Server is applied
- C. Priority Group Activation is disabled
- D. incorrect load balancing method
正解：A
質問 # 135
A standard virtual server has been associated with a pool with multiple members.
Assuming all other settings are left at their defaults, which statement is always true
concerning traffic processed by the virtual server.
- A. The IP addresses used in the clientElside connection are the same as the IP addresses used in the serverElside connection.
- B. The TCP ports used in the clienEl tside connection are the same as the TCP ports serverElside connection.
- C. The client IP address is unchanged between the cEl ls iedne t connection and the serverElside connection.
- D. The server IP address is unchanged between the cEl lis end te connection and the serverElside connection.
正解：C
質問 # 136
A BIG-IP Administrator has configured a BIG-IP cluster with remote user authentication against dcOl f5trn.com. Only local users can successfully log into the system. Configsync is also failing.
Which two tools should the 8IG-IP Administrator use to further investigate these issues? (Choose two)
- A. pam_timestamp_check
- B. passwd
- C. ntpq
- D. pwck
- E. dig
正解：B、C
質問 # 137
Assuming that systems are synchronized, which action could take place if thEl eo fv ae ir lcable is connected correctly and working properly, but the systems cannot communicate over the network due to external network problems.
- A. If network failElover is enabled, the standby system will go into active mode but only until the network recovers.
- B. Whether or not network failElover is enabled, the standby system will stay in standby mode.
- C. If network failElover is enabled, the standby system will assume the active mode.
- D. Whether or not network failElover is enabled, the standby system will assume the active mode.
正解：B
質問 # 138
Refer to the exhibit
The network team creates a new VLAN on the switches. The BIG-IP Administrator needs to create a configuration on the BIG-IP device. The BIG-IP Administrator creates a new VLAN and Self IP, but the servers on the new VLAN are NOT reachable from the BIG-IP device.
Which action should the BIG-IP Administrators to resolve this issue?
- A. Assign a physical interface to the new VLAN
- B. Create a Floating Set IP Address
- C. Change Auto Last Hop to enabled
- D. Set Port Lockdown of Set IP to Allow All
正解：A
質問 # 139
A BIG-IP Administrator applied the latest hotfix to an inactive boot location by mistake, and needs to downgrade back to the previous hotfix.
What should the BIG-IP Administrator do to change the boot location to the previous hotfix?
- A. Reinstall the previous hotfix and re-activate the license
- B. Uninstall the base version and restore the UCS
- C. Reinstall the base version and install the previous hotfix
- D. Uninstall the newest hotfix and reinstall the previous hotfix
正解：C
質問 # 140
The ICMP monitor has been assigned to all nodes. In addition, all pools have been assigned custom monitors. If a pool eb.is marked vailable.
The ICMP monitor has been assigned to all nodes. In addition, all pools have been assigned custom monitors. If a pool .eb.is marked .vailable (green) which situation is sufficient to cause this.
- A. Less than 50% of the eb.pool member nodes responded to the ICMP echo request.Less than 50% of the .eb.pool. member. nodes responded to the ICMP echo request.
- B. All of the eb.pool member
nodes are responding to the
ICMP monitor
as expected.All of the .eb.pool. member. nodes are responding to the ICMP monitor as expected. - C. All of the members of the eb.pool have had their content updated recently and their responses no longer match the monitor receiveAll of the members of the .eb.pool have had their content updated recently and their responses no longer match the monitor. receive rule.
- D. Over 25% of the eb.pool members have had their content updated and it no longer matches the receive rule of the custom monitor.Over 25% of the
.eb.pool. members have had their content updated and it no longer matches the receive rule of the custom monitor. The other respond as expected.The other. respond as expected.
正解：D
質問 # 141
......
F5 201 (BIG-IP Administrator) 認定試験は、F5 BIG-IP アプリケーション配信ネットワークを管理、設定、トラブルシューティングするために必要なスキルと知識を検証するために設計されています。この認定は、企業環境で BIG-IP システムを管理および維持する責任がある IT プロフェッショナルを対象としています。この試験は、ネットワークの基礎、プロトコル、トラフィック管理、SSL/TLS オフロード、アプリケーション配信、セキュリティ、およびトラブルシューティングなど、さまざまなトピックをカバーしています。受験者は、BIG-IP 製品およびソリューションの設定と管理能力、および基盤となる技術の理解力について試験されます。
F5 201 (BIG-IP管理者) 認定試験は、ネットワークおよびセキュリティ業界でスキルと知識を向上させたいITプロフェッショナルに最適です。この認定試験は、特にF5 BIG-IP製品を扱う人々にとって、これらの製品を管理および維持する専門知識を検証するために貴重です。さらに、F5 201の認定を取得することは、職業的な成長の機会を提供し、最新の業界動向やテクノロジーについて常に情報を得る意欲と専門的な成長に取り組む姿勢を示すことができます。
F5 201認定試験の準備をするために、候補者はF5のトレーニングコースとBig-IP管理者の学習ガイドやBig-IP管理者練習試験などの研究資料を活用できます。これらのリソースは、候補者が試験でカバーされているトピックをよりよく理解し、試験日に成功に備えるのに役立ちます。
201問題集完全版解答試験学習ガイド：https://jp.fast2test.com/201-premium-file.html
リアル201は100%カバー率でリアル試験解答を試そう：https://drive.google.com/open?id=1vMszc3k1eCmbWGsGmosHHM-0pC4UmNO4