201試験をパスするなら弊社のF5 Networks Certification Study Materials試験パッケージを今すぐゲットして合格せよ
完全版最新の2025年最新の201試験問題集テストガイド、専門トレーニングFast2test
F5 201（BIG-IP管理者）試験は、F5 BIG-IP製品を管理する個人のスキルと知識をテストするために設計された認定試験です。この試験は、IT専門家がF5 BIG-IPシステムを管理および維持する能力を証明するための素晴らしい方法です。試験は、ネットワークアーキテクチャ、セキュリティ、アプリケーション配信、および管理など、幅広いトピックをカバーしています。
F5 201試験の準備には、公式のF5トレーニングコース、練習試験、オンラインフォーラムなど、さまざまな学習リソースを活用することができます。F5トレーニングコースは、F5 BIG-IPシステムとその機能と機能性を包括的に理解できるようにする一方、練習試験は、試験形式に慣れることができ、改善する必要がある領域を特定することができます。
質問 # 13
Assume a client's traffic is being processed only by a NAT; no SNAT or virtual server processing takes place. Also assume that the NAT definition specifies a NAT address and an origin address while all other settings are left at their defaults. If a client were to initiate traffic to the NAT address, what changes, if any, would take place when the BIGElIP processes such packets.
- A. The source address would not change, but the destination address would be translated to the NAT's address.
- B. The destination address would not change, but the source address would be translated to the origin address.
- C. The destination address would not change, but the source address would be translated to the NAT's address.
- D. The source address would not change, but the destination address would be translated to the origin address.
正解：D
質問 # 14
Which statement is true concerning a functional iRule?
- A. iRules must contain at least one pool assignment statement.
- B. iRules use a proprietary syntax language.
- C. iRules must contain at least one conditional statement.
- D. iRules must contain at least one event declaration.
正解：D
質問 # 15
A new BIG-IP VE is deployed with default settings. The BIG-IP Administrator completes the setup utility in the Configuration Utility. The internal self IP address fails to respond to a ping request. What is a possible cause of this issue?
- A. Internal interface VLAN is set to untagged
- B. Route is NOT assigned to internal self IP.
- C. Internal interface VLAN is set to tagged
- D. Port lockdown on internal self IP is set to Allow None
正解：C
質問 # 16
The current status of a given pool member is unknown. Which condition could explain that state?
- A. The member has a monitor assigned to it and the monitor did not succeed during the most recent timeout period.
- B. The member has a monitor assigned to it and the most recent monitor was successful.
- C. The member's node has a monitor assigned to it and the monitor did not succeed during the most recent timeout period.
- D. The member has no monitor assigned to it.
正解：D
質問 # 17
Which VLANs must be enabled for a SNAT to perform as desired (translating only desired packets)?
- A. The SNAT must be enabled for the VLANs where desired packets arrive and leave the BIG-IP.
- B. The SNAT must be enabled for the VLANs where desired packets leave the BIG-IP.
- C. The SNAT must be enabled for the VLANs where desired packets arrive on the BIG-IP.
- D. The SNAT must be enabled for all VLANs.
正解：C
質問 # 18
Assume a virtual server is configured with a ClientSSL profile. What would the result be if the virtual server's destination port were not 443?
- A. Since the virtual server is associated with a ClientSSL profile, it will always process traffic sent to port 443.
- B. SSL termination could not be performed if the virtual server's port was not port 443.
- C. As long as client traffic was directed to the alternate port, the virtual server would work as intended.
- D. Virtual servers with a ClientSSL profile are always configured with a destination port of 443.
正解：C
質問 # 19
Monitors can be assigned to which three resources? (Choose three.)
- A. iRules
- B. pool members
- C. nodes
- D. SNATs
- E. NATs
- F. virtual servers
- G. pools
正解：B、C、G
質問 # 20
In the BIG-IP Configuration Utility, a user requests a single screen view to determine the status of all Virtual Servers and associated pool members, as well as any iRules in use. Where should the BIG-IP Administrator instruct the user to find this view?
- A. Local Traffic > Monitors
- B. Statistics
- C. Local Traffic > Network Map
- D. Local Traffic > Virtual Servers
正解：C
解説：
Explanation
Network Map can display vs and its associated pool, pool member, and irule, can be retrieved, and can be quickly linked.
質問 # 21
A BIG-IP Administrator wants to add a new Self IP to the BIG-IP device. Which item should be assigned to the new Self IP being configured?
- A. Trunk
- B. VLAN
- C. Route
- D. Interface
正解：B
質問 # 22
A BIG-IP Administrator upgrades the BIG-IP LTM to a newer software version. After the administrator reboots into the new volume, the Configuration fails to load. Why is the Configuration failing to load?
- A. The license needs to be reactivated before the upgrade.
- B. A minimum of at least two reboots is required.
- C. Connectivity to the DNS server failed to be established.
- D. The upgrade was performed on the standby unit.
正解：A
質問 # 23
Which event is always triggered when the client sends data to a virtual server using TCP.
- A. CLIENT_DATA
- B. HTTP_REQUEST
- C. VS_CONNECTED
- D. HTTP_DATA
正解：A
質問 # 24
Refer to the exhibit. The BIG-IP Administrator needs to avoid overloading any of the Pool Members with connections, when they become active.
What should the BIG-IP Administrator configure to meet this requirement?
- A. Action On Service Down to Reselect
- B. Slow Ramp Time to the Pool
- C. Different Ratio for each member
- D. Same Priority Group to each member
正解：B
質問 # 25
A custom HTTP monitor is failing to a pool member 10.10.3.75:8080 that serves up www.example.com.
A ping works to the pool member address.
The SEND string that the monitor is using is: GET/HTTP/l.l/r/n/Host.www.example.com/r/n/Connection Close/r/n/r/n Which CLI tool syntax will show that the web server returns the correct HTTP response?
- A. tracepath 'http://www.example.com:80
- B. curl-header 'Host:www.example.com'
http://10.10.3.75:8080/ - C. curlhttp://10.10.10.3.75:8080/www.example.com/index.html
- D. tracepath 10.10.3.75:8080 GET /index
正解：B
質問 # 26
Assume a client's traffic is being processed only by a NAT; no SNAT or virtual server processing takes place. Also assume that the NAT definition specifies a NAT address and an origin address while all other settings are left at their defaults. If a client were to initiate traffic to the NAT address, what changes, if any, would take place when the BIG-IP processes such packets?
- A. The source address would not change, but the destination address would be translated to the NAT's address.
- B. The destination address would not change, but the source address would be translated to the origin address.
- C. The destination address would not change, but the source address would be translated to the NAT's address.
- D. The source address would not change, but the destination address would be translated to the origin address.
正解：D
質問 # 27
A virtual server is defined per the charts. The last five client connections were to members C, D, A, B, B . Given the conditions shown in the above graphic, if a client with IP address 205.12.45.52 opens a connection to the virtual server, which member will be used for the connection.
- A. 172.16.20.4:80
- B. 172.16.20.5:80
- C. 172.16.20.3:80
- D. 172.16.20.1:80
- E. 172.16.20.2:80
正解：A
質問 # 28
......
2025年最新の問題F5 Networks Certification Study Materials合格目指して201リアル試験をマスターせよ！：https://jp.fast2test.com/201-premium-file.html
練習問題201には画期的なBIG-IP Administrator Exam練習試験問題：https://drive.google.com/open?id=1vMszc3k1eCmbWGsGmosHHM-0pC4UmNO4