[2025年03月]更新のEMC D-PE-OE-23問題集厳選された問題集でパスして、最短時間を目指そう
EMC D-PE-OE-23試験問題集で[2025年最新] 練習 高合格率な試験問題集問題
EMC D-PE-OE-23 認定試験の出題範囲：
| トピック | 出題範囲 |
|---|---|
| トピック 1 |
|
| トピック 2 |
|
| トピック 3 |
|
| トピック 4 |
|
| トピック 5 |
|
質問 # 17
A technician needs to use the Lifecycle Controller to update the server usingftp.dell.com.
Which step must the technician take to complete this task?
- A. Configure the Lifecycle Controller with an IP address
- B. Providethe FTP credentials
- C. Download the repository to a local USB
- D. Enable FTP protocol in the Lifecycle Controller
正解：A
質問 # 18
What type of fans are installed in servers with NVMe storage and GPU configurations?
- A. STD
- B. HPR
- C. LFM
- D. VHP
正解：D
質問 # 19
A technician is attempting to update firmware using the Automatic Update feature of the iDRAC GUI.
However, the Automatic Updates tab is missing from the iDRAC System Update page.
What is the issue?
- A. iDRAC is missing the Enterprise license
- B. iDRAC needs to be reset
- C. User is not logged in as Root
- D. Automatic Update server may be down
正解：A
質問 # 20
What are benefits of installing the Dell iDRAC Service Module?
- A. iDRAC access via host OS.
Ability to access the Lifecycle Controller for server updates - B. Remote iDRAC reset.
Ability to update firmware on the server - C. In-band SNMP traps for hardware alerts.
Remote iDRAC reset - D. Ability to update firmware on the server.
iDRAC access via host OS
正解：C
質問 # 21
A new Dell EMC PowerEdge server will be deployed in a branch office that does not have a good server cooling system. A Dell EMC Fresh Air system that can handle operating temperatures up to 45° C will be used.
What is required for the Fresh Air system to operate correctly?
- A. M.2/BOSS module
- B. Redundant PSU configuration
- C. NVDIMM memory
- D. PCIe SSD/NVMe drive module
正解：B
質問 # 22
An engineer must install a new GPU card in a Dell PowerEdge 15G server. They discover the server has two 570W PSU, but the new configuration requires 900W of power. More powerful PSUs are ordered.
What can be done for the system to support the GPU card before replacing the PSUs?
- A. Disable Power Capping and remove any limit.
- B. Enable Power Capping and set a limit of 150%.
- C. Change the redundancy configuration to 2+0.
正解：C
質問 # 23
On a PowerEdge R640 server, the System Lockdown mode has been enabled. Certain features are no longer available in the System BIOS utility or IDRAC GUI.
Which other feature is no longer available?
- A. iSM
- B. Booting to a 32-bit OS
- C. Lifecycle Controller
- D. OMSA
正解：C
質問 # 24
A technician completes initial system configuration of a server. They need to set up automated, proactive support without requiring a systems management console.
Which tool does the technician need to install?
- A. Open Manage Essentials
- B. Open Manage Server Administrator
- C. SupportAssist for iDRAC / Enterprise systems
- D. Support Assist Collector
正解：C
質問 # 25
A technician is deploying a server.
What should they do once the server is fully configured and deployed?
- A. Switch on write-protect for the vFlash SD card
- B. Back up the server profile and configure the Parts Replacement feature
- C. Change the iDRAC secure password based on the users' company policies
- D. Back up the server profile and reset the iDRAC to Default Settings
正解：C
質問 # 26
A technician is updating firmware on a Windows Server using the Lifecycle Controller following a NIC replacement, but it fails to complete the update on the NIC despite successfully updating other components.
The update's read me confirms that the current version is too old to upgrade with the Lifecycle Controller and an alternative method must be used.
Which three update methods could the technician use to meet this requirement? (Choose three.)
- A. Use Update and Rollback within the iDRAC web GUI
- B. Run a Dell Update Package (DUP) from the OS
- C. Create a bootable ISO file with Repository Manager
- D. Launch Platform Update from OpenManage Server Administrator
- E. Launch Server Update Utility (SUU) from the OS
正解：B、C、D
質問 # 27
What image does the iDRAC9 BIOS/UEFI Recovery feature use to flash a corrupt BIOS?
- A. Latest BIOS DUP from the online Dell catalog
- B. Dell DUP supplied by the system administrator
- C. Last known good BIOS image
- D. Latest BIOS DUP that the system is aware of
正解：D
質問 # 28
A technician installs OpenManage Server Administrator (OMSA) on a server.
Which two address options should be used to access OMSA remotely using a web browser? (Choose three)
- A. https://IP address: 1311
- B. https://IP address: 80
- C. https://IP address: 2607
- D. https://hostname: 2607
- E. https://hostname: 1311
- F. https://IP address: 443
正解：C、D、F
質問 # 29
A technician configures iDRAC on a new server for access on the management network. When accessing via telnet, the connection is refused. Network connectivity is a verified network. NO ports are blocked by any network devices.
Why is the telnet connection being refused?
- A. Telnet is NOT supported to access iDRAC.
- B. The telnet client must be configured to connect to port 8899 on the iDRAC
- C. The iDRAC must be configured to allow the IP address of the technician's workstation.
- D. Telnet is NOT enabled by default on the iDRAC
正解：D
質問 # 30
A technician is trying to troubleshoot a server that constantly keeps raising and lowering the RPMs of the fans.
The technician investigates and finds the following:
- No errors are displayed
- No obvious log entries exist concerning temperatures
- Server cover is installed and secured
- No expansion cards are installed
What would be the quickest action plan that the technician could attempt to try to fix the issue with the fans?
- A. Replace all the fans
- B. Adjust the Multi Vector Cooling values
- C. Replace the fans one at a time until the faulty fan is identified
- D. Upload the latest iDRAC firmware
正解：D
質問 # 31
A company that has very specific firmware requirements has acquired Dell EMC PowerEdge servers Any replaced parts of the type must match the original parts identically. The procedure must be as simple as possible with minimal risk.
What action should a technician take to help accomplish this goal?
- A. Enable the Match Firmware of Replaced Part setting in the system BIOS
- B. Configure servers to access the remote firmware repository
- C. Install and configure a repository manager
- D. Enable the Collect System Inventory On Restart (CSIOR) attribute
正解：B
質問 # 32
Which two models are 16th generation PowerEdge rack servers?(Select 2)
- A. MX760C
- B. C6620
- C. R760
- D. XE9680
- E. R650
正解：C、D
解説：
Identifying 16th Generation PowerEdge Rack Servers
Server Portfolio and Features (10%)
* Define chassis form factors and numbering nomenclature
* Identify server features and specifications
* Position the server in the market landscape
Understanding Dell PowerEdge Server Generations and Models
Dell PowerEdge servers are categorized by generation (denoted as "G") and model numbers. The16th Generation (16G)represents the latest series of Dell servers as of 2023, featuring the newest technologies and enhancements.
Evaluation of Options:
* Option A: R650
* Explanation: The PowerEdge R650 is a15th Generation (15G)server.
* Conclusion: Not a 16G server.
* Option B: MX760C
* Explanation: The PowerEdge MX760c is a compute sled for theDell PowerEdge MX7000 modular chassis.
* Generation: It is part of the16th Generation, but it is a modular blade server, not a rack server.
* Conclusion: Since the question asks for rack servers, this may not be the best fit.
* Option C: R760
* Explanation: The PowerEdge R760 is a16th Generation rack server.
* Features:
* 2U rack form factor
* Supports latest Intel Xeon Scalable processors
* Enhanced performance and scalability
* Conclusion:Correct Answer.
* Option D: C6620
* Explanation: The PowerEdge C6620 is a15th Generation serverdesigned for high-density compute environments.
* Conclusion: Not a 16G server.
* Option E: XE9680
* Explanation: The PowerEdge XE9680 is a16th Generation rack serverdesigned for extreme performance, particularly for AI and HPC workloads.
* Features:
* Supports up to eight GPUs
* High-performance computing capabilities
* Conclusion:Correct Answer.
Additional Notes:
* Rack Servers vs. Modular Servers:
* Rack Servers: Standalone servers that mount directly into standard server racks (e.g., R-series, XE-series).
* Modular Servers: Compute modules that fit into a shared chassis (e.g., MX-series). While they can be mounted in racks, they are not considered standalone rack servers.
Dell Operate References:
* Server Portfolio and Features (10%)
* Define chassis form factors and numbering nomenclature: Understanding model numbers helps identify the server generation.
* Identify server features and specifications: Recognizing the characteristics of 16G servers.
* Position the server in the market landscape: Knowing which servers are current and their intended workloads.
Conclusion:
ThePowerEdge R760andXE9680are both16th Generation rack servers. They represent the latest in Dell's server technology and are designed to meet modern data center needs.
質問 # 33
What is a valid password option available from the iDRAC9 Unique ID feature?
- A. Secure Default
- B. Encryption Default
- C. Legacy Generated
- D. Randomly Generated
正解：D
質問 # 34
An existing server is transferred to a new location. The technician is directed to change the information displayed on the LCD located on the front bezel to show the ambient temperature.
What is a consideration for the technician?
- A. LCD information can be configured for displaying ambient temperature using the iDRAC GUI.
- B. LCD information can only be configured to display the Service Tag and any errors that occur.
- C. iDRAC Enterprise license must be installed to allow the LCD information to be changed.
- D. Ambient temperature information cannot be displayed on the LCD.
正解：A
質問 # 35
What is the purpose of the ePSA on a Dell EMC PowerEdge server?
- A. External PowerEdge support assist
- B. System diagnostics while the operating system is running
- C. Centralized PowerEdge support assist
- D. System diagnostics before starting the operating system
正解：D
質問 # 36
A technician is on-site to update firmware on a server for which the iDRAC is not configured. In addition, the technician does not have access to the OS.
However, the site does have DHCP available on the production network as well as on an available workstation. The technician has access to the rack-mounted KVM.
How should the technician update the firmware on the server?
- A. Reboot the server, select F10, configure the network, and run Firmware Update
- B. Reboot the server, select F2, configure the network, and run Firmware Update
- C. Log in via telnet through a serial cable and configure the workstation as a proxy, then downloaded the firmware
- D. Log in via SSH through a serial cable and configure the workstation as a proxy, then download the firmware
正解：A
質問 # 37
A technician has a server in production. The iDRAC SEL log indicates a possible issue with DIMMs A1 and A2. Firmware is up to date.
What is the most efficient way to troubleshoot this issue?
- A. Swap DIMMs A1 and A2 to B1 and B2
- B. Swap DIMMs A1 and A2 to B1 and B3
- C. Reseat DIMMs A1 and A2
- D. Swap DIMMs A1 and A2 to A3 and A4
正解：C
質問 # 38
Which mobile devices are supported by Quick Sync in 13G Dell EMC PowerEdge servers?
- A. iOS and Android devices only
- B. iOS, Android, and Windows Phone devices
- C. Android devices only
- D. iOS devices only
正解：C
質問 # 39
A technician has replaced a network daughter card (NDC) with a different, supported NDC.
Using the Lifecycle Controller, what can they do to verify that the new NDC is present?
- A. View System Information from System Setup > Advanced Hardware Configuration > System BIOS Select Configure NDC in Device Settings
- B. Verify Hardware Inventory License has been imported
Verify Current Inventory form Hardware Inventory - C. View Current Inventory from Hardware Inventory
Verify Collect System Inventory on Restart Option (CSIOR) is enabled - D. View Factory Shipped Inventory from Hardware Inventory
Select Import NDC MIB
正解：C
質問 # 40
......
D-PE-OE-23試験問題集でPDF合格保証 成功は正確かつ更新された問題：https://jp.fast2test.com/D-PE-OE-23-premium-file.html