合格させるD-PE-OE-23ブレーン問題集で更新されたのは認定サンプル問題 [Q26-Q46]

Share

合格させるD-PE-OE-23ブレーン問題集で更新されたのは認定サンプル問題

オンラインD-PE-OE-23テストブレーン問題集とテストエンジン


EMC D-PE-OE-23 認定試験の出題範囲:

トピック出題範囲
トピック 1
  • サーバー ポートフォリオと機能: 試験のこのセクションでは、Dell システム管理者と Dell テクニカル サポート エンジニアのスキルを測定し、シャーシ フォーム ファクターの定義とその番号付けシステムについて説明します。
トピック 2
  • サーバー管理および構成ツール: この試験セクションでは、Dell テクニカル サポート エンジニアのスキルを測定し、ログイン手順や接続方法などの iDRAC の機能について学習します。LCC や racadm などのさまざまな管理インターフェイス オプションや、インバンドおよびアウトオブバンドの管理手法について説明します。
トピック 3
  • サーバー トラブルシューティング: この試験セクションでは、Dell テクニカル サポート エンジニアのスキルを測定し、システム ID や電源ユニットなどのサーバー コンポーネントの視覚的なインジケーターの分析について学習します。
トピック 4
  • サーバー コンポーネント: この試験セクションでは、Dell システム管理者のスキルを測定し、プロセッサ、メモリ オプション、構成などのさまざまなサーバー コンポーネントをカバーします。また、電源オプション、冗長機能、温度管理、液体冷却システムについても取り上げます。
トピック 5
  • システム管理: 試験のこのセクションでは、Dell システム管理者のスキルを測定し、正常性状態の確認と iDRAC ライセンスの管理について扱います。

 

質問 # 26
When does a customer require the Service Tag of the Dell EMC PowerEdge server?

  • A. First time accessing the BIOS
  • B. Obtaining warranty information
  • C. First time logging in to iDRAC
  • D. Activating the OS

正解:B


質問 # 27
Beginning with which generation Dell EMC PowerEdge server is the NDC available?

  • A. 11G
  • B. 13G
  • C. 12G
  • D. 14G

正解:C


質問 # 28
A server has two power supply units (PSUs) in a redundant configuration. One power supply unit fails. A technician replaces the failed PSU, but the server does NOT return to redundant power mode.
What is the cause of this issue?

  • A. The new PSU has a different wattage than the existing PSU.
  • B. The server has NOT been Power Cycles to bring the new PSU online.
  • C. The power redundant options is disabled in the System Setup Utility.
  • D. Both PSUs were NOT replaced at the same time.

正解:A


質問 # 29
A Dell EMC PowerEdge 13G server is being controlled through a secure port by iDRAC8.
What login connection options are available on server using a secure port?

  • A. Web GUI and RACADM CLI
  • B. RACADM CLI and DRM
  • C. DRM only
  • D. Web GUI and SSH

正解:D


質問 # 30
Which is a feature of an AMD processor in a PowerEdge server?

  • A. Supports up to four sockets
  • B. Up to 60 cores
  • C. Secure Encrypted Virtualization
  • D. Fastest processor speeds

正解:C

解説:
Understanding Features of AMD Processors in Dell PowerEdge Servers
Server Components (26%)
* Define the different processor, memory options, and memory configurations
* Analyze server security features
Overview
AMD processors, specifically the AMD EPYC series, are utilized in Dell PowerEdge servers to provide high performance, scalability, and advanced security features. One of the standout features of AMD processors is Secure Encrypted Virtualization (SEV).
Explanation of Options
* Option A: Supports up to four sockets
* Explanation: AMD EPYC processors in current Dell PowerEdge servers typically support up to two sockets. Intel processors are more commonly associated with supporting up to four sockets in server configurations.
* Conclusion: Incorrect.
* Option B: Up to 60 cores
* Explanation: AMD EPYC processors offer up to 64 cores per processor. While "up to 60 cores" is close, it does not fully capture the maximum core count offered.
* Conclusion: While partially correct, not the most distinctive feature.
* Option C: Fastest processor speeds
* Explanation: Processor speeds vary depending on specific models and configurations. Both AMD and Intel offer processors with high clock speeds. Claiming the "fastest processor speeds" is subjective and not a definitive feature.
* Conclusion: Not a unique feature.
* Option D: Secure Encrypted Virtualization
* Explanation: SEV is a security feature unique to AMD processors. It allows for the encryption of virtual machine memory, providing isolation between VMs and enhancing security in virtualized environments.
* Features:
* Encrypts VM memory with individual keys.
* Protects against hypervisor-level attacks.
* Enhances data security and compliance.
* Conclusion:Correct Answer.
Dell Operate References
* Server Components (26%):
* Define the different processor, memory options, and memory configurations: Understanding the features and capabilities of AMD processors in server environments.
* Analyze server security features: SEV is a significant security feature offered by AMD processors, enhancing virtualization security.
Conclusion
The standout feature of AMD processors in Dell PowerEdge servers isSecure Encrypted Virtualization, which enhances security in virtualized environments by encrypting VM memory.


質問 # 31
A technician receives a repurposed Dell EMC PowerEdge server. The server already has the OS and the Dell Tools software installed. After racking and cabling the server, the technician attempts to log into the iDRAC but cannot do so.
The default login account has been disabled.
What method can be used to enable the default login account?

  • A. Run the racadm racreset command from the host OS
  • B. SSH into the iDRAC and run the racadm racresetcfg command
  • C. Run the racadm racresetcfg command from the host OS
  • D. SSH into the iDRAC and run the racadm racreset command

正解:C


質問 # 32
What are the diagnostic indicators on the left control panel of a Dell PowerEdge 16G server?

  • A. Electrical indicator, Temperature indicator, Memory indicator, and PSU indicator
  • B. Drive indicator, Electrical indicator, Temperature indicator, and Memory indicator
  • C. Quick Sync 2 indicator, System ID indicator, PSU Indicator, and iDRAC direct indicator
  • D. Drive indicator, Memory indicator, iDRAC direct indicator, and PCIe indicator

正解:B


質問 # 33
Which is a feature of SNAP I/O?

  • A. Does not use a PCIe slot
  • B. Bypasses UPI and directly connects to both CPU sockets
  • C. Lower network throughput
  • D. Higher latency

正解:B


質問 # 34
A technician replaces a failed power supply unit (PSU) on a server. The LED on the new PSU blinks green and turns off.
What is the state of the new PSU?

  • A. Successfully added and functional
  • B. Successfully added and in standby mode
  • C. Mismatched
  • D. Defective

正解:C


質問 # 35
What are the two purposes of E3 EDSFF drives?
(Select 2)

  • A. Provides a common form factor for accelerator and computational storage.
  • B. Replaces 2.5" and U.2 form factors.
  • C. Provides higher interface speed with PCIe Gen4.
  • D. Replaces 3.5" and M.2 form factors.

正解:A、B

解説:
Understanding E3 EDSFF Drives
Server Components (26%)
* Define storage options, Drives
What is EDSFF?
* Enterprise and Datacenter Storage Form Factor (EDSFF)is a family of SSD form factors designed for enterprise and data center applications.
* E3 Form Factor: A specific size within the EDSFF standard, optimized for performance, density, and thermal efficiency.
Purposes of E3 EDSFF Drives
* Replaces 2.5" and U.2 Form Factors
* Explanation:
* E3 drives are intended to replace traditional 2.5" SSDs and U.2 form factors.
* They offer higher density, improved thermal characteristics, and better scalability.
* Conclusion:Option D is Correct
* Provides a Common Form Factor for Accelerator and Computational Storage
* Explanation:
* E3 EDSFF drives are designed to support not only storage but also accelerator devices like GPUs, FPGAs, and computational storage.
* This standardization simplifies system design and improves compatibility.
* Conclusion:Option C is Correct
Explanation of Options
* Option A: Provides higher interface speed with PCIe Gen4
* Analysis: While EDSFF drives do support PCIe Gen4, their primary purpose is form factor standardization and scalability, not just providing higher interface speeds.
* Conclusion: Not the main purpose.
* Option B: Replaces 3.5" and M.2 form factors
* Analysis: E3 EDSFF does not directly replace 3.5" HDDs or M.2 SSDs, which serve different purposes and sizes.
* Conclusion: Incorrect.
* Option C: Provides a common form factor for accelerator and computational storage
* Analysis: Correct as per the explanation above.
* Conclusion:Correct Answer
* Option D: Replaces 2.5" and U.2 form factors
* Analysis: Correct as per the explanation above.
* Conclusion:Correct Answer
Dell Operate References
* Server Components (26%)
* Define storage options, Drives: Knowledge of new storage technologies and form factors is essential for modern server configurations.
* Server Portfolio and Features (10%)
* Identify server features and specifications: Understanding hardware advancements and their practical benefits.
Conclusion
The E3 EDSFF drives serve to replace traditional 2.5" and U.2 form factors (Option D) and provide a common form factor for accelerator and computational storage devices (Option C), enhancing scalability and compatibility in data centers.


質問 # 36
A technician is remotely installing ESXi 6.0 on a PowerEdge R640 in BIOS boot mode. The system has dual internal SD cards. After the OS is installed, the system reboots and shows an error screen with the following message: "No boot device found" What should the technician do to resolve this issue?

  • A. Reseat the SD cards and try to boot to them again
  • B. Enable vFlash in iDRAC web GUI
  • C. Set the boot made from BIOS to UEFI
  • D. Change the Hard Disk Drive Sequence

正解:B


質問 # 37
After completing a disk rebuild operation, a technician needs to configure the system so that the rebuild process happens faster the expense of slowing users down.
Which setting should be changed?

  • A. Rebuild Rate in the iDRAC GUI
  • B. Rebuild Rate in the BIOS settings
  • C. System Profile to Performance in the BIOS settings
  • D. System Profile to Performance in the iDRAC GUI

正解:A


質問 # 38
A technician needs to view the health status of the server and components.
Which Dell management tool should the technician install in the OS?

  • A. Open Manage Server Administrator
  • B. Open Manage PowerEdge Components
  • C. Open Manage Health Status
  • D. Open Manage Integrations

正解:A


質問 # 39
A technician needs to roll back the firmware on a server for the Fiber Channel card. The technician needs to determine the previous version before rolling back the firmware.
How should the technician view the previous and current firmware versions utilizing Lifecycle Controller?

  • A. Under Firmware Update, select View Current Versions
  • B. Under Hardware Configuration, select Launch Firmware Rollback and select Components
  • C. Under Firmware Update, select Launch Firmware Rollback and select Components
  • D. Under Hardware Configuration, select View Current Versions

正解:A


質問 # 40
What is a systems management console solution optimized for monitoring and managing Dell enterprise and remote office hardware?

  • A. OpenManage Essentials
  • B. iDRAC9
  • C. SupportAssist Enterprise
  • D. iSM

正解:A


質問 # 41
Case Study 3
A financial services company has file sharing workflows and 2000 home directories which include 70% Microsoft Windows and 30% Linux. The Security team is also interested in credit card usage data analytics such as point of sale, geolocation, and authorization and transaction data. Home directories and file shares do not require D@RE or SEC compliance.
However, due to the sensitivity of the credit card data, the company requires D@RE for credit card information and must adhere to the U.S. SEC 17a-4(f) compliance standards. Additionally, they are interested in auditing user access and anti-virus features.
The compute and storage environment consists of the following:
- 200 TB of Fibre Channel drives on NetApp ONTAP 7
- Environment is expected to grow 200 TB over the next three years
In order to remove the encryption key on the SED drives, which steps are required?

  • A. SmartFail and then remove the drive
  • B. SmartFail the cluster and then remove the drive
  • C. Suspend the node and then remove the drive
  • D. Suspend the cluster and then SmartFail the drive

正解:C


質問 # 42
A technician is installing Windows Server 2016 on a server with RAID 1 and RAID 5 virtual disks.
How should they configure the server and deploy the OS?

  • A. Go to Settings in the Lifecycle Controller
    Configure both virtual disks using the guided OS installation method
  • B. Go to system setup to configure both virtual disks
    Select the Deploy OS option in the system setup utility
  • C. Go to the RAID Configuration menu in the Lifecycle Controller
    Create both virtual disks Go to OS deployment using 'Deploy OS'
  • D. Create two virtual disks using the iDRAC UI
    Access the Lifecycle Controller
    Go to OS deployment using 'Deploy OS'

正解:D


質問 # 43
What is required to use the iSM Automatic System Recovery feature?

  • A. Server Administrator installed
  • B. Server Administrator not installed
  • C. OS watchdog timer enabled
  • D. OS watchdog timer disabled

正解:D


質問 # 44
SPECIAL INSTRUCTIONS
The remaining Part1 questions are associated with four case studies that describe various environments or settings. Each case study appears on its own display screen. Questions for each case study will appear on separate display screens. When displaying a question, you can easily review the related case study by clicking on the 'Review Case Study' icon shown below:
Case Study 5 - Refer to the Exhibit.

Backing up data from a Dell EMC Isilon cluster exceeds the company's backup window. Because the company has a large amount of data with a continuous high growth rate, they want to change their backup strategy. The Gen 6 Isilon cluster consists of 24 nodes.
Their current backup strategy is an NDMP three-way backup performing weekly full backups to tape and incremental backups each night. The strategy uses Dell EMC Net Worker. The DMA uses Include paths to specify what data to backup. All data on the cluster must remain accessible.
The company's IT team is now looking for a method to increase the performance of their backups. After some investigations, you notice that the backup job quiesces the file system. This is creating lock contention issues on open files and not allowing users full access to data when the backup job runs.
What advice should be provided to the team to eliminate lock contention and allow full access to users?

  • A. Add A100 Backup Accelerators and configure for three-way NDMP
  • B. Stop using an NDMP-based backup strategy.
  • C. Create a cron job to remove all locks before each backup.
  • D. Enhance the backup strategy using snapshots for backups.

正解:A


質問 # 45
A technician needs to install a server with a PERC RAID controller and 24, 2.5" SAS SED drives.
The installation requires the following items to be created:
- Three equal-sized virtual disks
- Encrypted virtual disks
- A global hot spare
In addition to selecting the physical drive to be the hot spare disk, what tasks should the technician perform to set up the RAID controller?

  • A. Boot to F12 and create the three virtual disks
    Select each virtual disk and enable encryption
  • B. Access the iDRAC GUI and create the three virtual disks
    Select each virtual disk and enable encryption
  • C. Boot to Ctrl+R and create the three virtual disks
    Select each physical drive and enable encryption
  • D. Boot to F12 and create the three virtual disks
    Select each physical drive and enable encryption

正解:B


質問 # 46
......

リアルEMC D-PE-OE-23試験問題集には正解52問題と解答があります:https://jp.fast2test.com/D-PE-OE-23-premium-file.html


弊社を連絡する

我々は12時間以内ですべてのお問い合わせを答えます。

我々の働いている時間: ( GMT 0:00-15:00 )
月曜日から土曜日まで

サポート: 現在連絡 

English Deutsch 繁体中文 한국어