[2024年05月02日] 最新更新されたのは350-601試験問題2024年更新
無料更新されたCisco 350-601テストエンジン問題には455問題と解答
質問 # 19
An engineer configured an environment that contains the vPC and non-vPC switches. However, it was noticed that the downstream non-vPC switches do not receive the upstream vPC switch peers. Which vPC feature must be implement to ensure that vPC and non-vPC switches receive same STP bridge ID from the upstream vPC switch peers?
- A. VPC local role-priority 4000
- B. Peer-switch
- C. System-mac 0123.4567.89ab
- D. Peer-gateway
正解：B
解説：
Peer-Switch feature allows the vPC peers use the same STP root ID as well as the same bridge ID.
Reference:
https://www.cisco.com/c/en/us/td/docs/switches/datacenter/nexus9000/sw/6-x/interfaces/configuration/guide/b_Cisco_Nexus_9000_Series_NX-OS_Interfaces_Configuration_Guide/b_Cisco_Nexus_9000_Series_NX-OS_Interfaces_Configuration_Guide_chapter_0111.html
質問 # 20
Which virtual MAC address is the default for HSRP version 2 group 10?
- A. 3716.1350.1C0A
- B. 0000.5E00.0110
- C. 0000.0C9F.F00A
- D. 0000.0C9F.F010
正解：C
解説：
https://www.cisco.com/c/en/us/td/docs/ios-xml/ios/ipapp_fhrp/configuration/xe-3s/fhp-xe-3s-book/fhp-hsrp-v2.html
質問 # 21
Where does the witness VM reside in a Cisco Hyperflex Edge deployment?
- A. Windows application
- B. local HyperFlex datastore
- C. Hyper Rex Data Platform
- D. Cisco Intersight
正解：D
質問 # 22
The Cisco Nexus switch Generic Online Diagnostics policy for a PortLoopback test requires 10 consecutive failures to error disable the port. The customer wants to change it to 5 consecutive failures. Which configuration applies the changes for module 1 only?
- A. Option D
- B. Option A
- C. Option C
- D. Option B
正解：A
解説：
Explanation
"mod all" is incorrect. "mod 1test" is incorrect. "publish event" is incorrect.
"mod 1 test" is correct. It is with "policy-default".
質問 # 23 
Refer to the exhibit. An engineer needs to implement streaming telemetry on a cisco MDS 9000 series switch.
The requirement is for the show command data to be collected every 30 seconds and sent to receivers. Which command must be added to the configuration meet this requirement?
- A. Sensor-grp 200 sample-period 30
- B. Snsr-grp 200 sample-interval 30
- C. Sensor-grp 200 sample-period 30000
- D. Snsr-grp 200 sample-interval 30000
正解：D
解説：
Explanation
snsr-grp <id> sample-interval <interval> Currently, sensor group ID supports only numeric ID values. Specify the streaming sample interval value; the value must be in milliseconds. The minimum streaming sample interval that is supported is 30000 milliseconds.
https://www.cisco.com/c/en/us/td/docs/switches/datacenter/mds9000/sw/8_x/config/san_analytics/cisco-mds900
質問 # 24
An engineer must start a software upgrade on a Cisco Nexus 5000 Series Switch during a zone merge. What is the result of this action?
- A. The upgrade stops
- B. The zone merge stops.
- C. The zone merge executes and then the upgrade completes.
- D. The zone merge pauses until the upgrade completes
正解：A
解説：
https://www.cisco.com/c/en/us/td/docs/switches/datacenter/nexus5500/sw/upgrade/602_N2_2/n5500_upgrade_downgrade_602_n2_2.html
質問 # 25
A host EPG Client wants to talk to a webserver in EGP Web. A contract with default settings is defined between EPG Client and EPG Web, which allows TCP communication initiated by the client toward the webserver with TCP destination port 80. Which statement is true?
- A. If EPG Web is made a preferred group member, a contract between EPG Client and EPG Web is no longer required for the host in EPG Client to reach the webserver in EPG Web.
- B. If vzAny is configured to consume and provide a "deny all" contract, traffic between EPG Client and EPG Web is no longer allowed.
- C. The host in EPG Client is allowed to connect to TCP destination port 80 on the webserver in EPG Web.
The webserver will not be allowed to initiate a separate TCP connection to a host port with TCP source port 80. - D. The host in EPG Client is allowed to connect to TCP destination port 80 on the webserver in EPG Web.
The webserver is allowed to initiate a separate TCP connection to a host port with TCP source port 80.
正解：D
解説：
Apply Both Direction and Reverse Filter Port in the subject for the filter. These two options are by default enabled...This means that if the provider EPG initiates traffic toward the consumer EPG, the Cisco ACI fabric allows it for any destination ports if the source port is 80.
https://www.cisco.com/c/en/us/td/docs/switches/datacenter/aci/apic/sw/1-x/Operating_ACI/guide/ b_Cisco_Operating_ACI/b_Cisco_Operating_ACI_chapter_01000.html Reverse filter and apply in both directions is default.
If a filter allows traffic from any consumer port to a provider port (e.g. 8888), if reverse port filtering is enabled and the contract is applied both directions (say for TCP traffic), either the consumer or the provider can initiate communication. The provider could open up a TCP socket to the consumer using port 8888, whether the provider or consumer sent traffic first.
https://www.cisco.com/c/en/us/td/docs/switches/datacenter/aci/apic/sw/1-x/Operating_ACI/guide/ b_Cisco_Operating_ACI/b_Cisco_Operating_ACI_chapter_01000.html
質問 # 26
An engineer must configure multiple EPGs on a single access port in a large Cisco ACI fabric without using VMM integration. The relevant access policies and tenant policies have been created. A single AAEP is used to configure the access port in the fabric. Which two additional steps must be taken to complete the configuration? (Choose two.)
- A. The EPGs must be configured as static ports
- B. The corresponding bridge domains must be configured in legacy mode
- C. A contract must be defined between the EPGs
- D. The EPGs must link directly to the corresponding AAEP
- E. The EPGs must be linked to the correct physical domain
正解：C、D
質問 # 27
An engineer changed a configuration and must perform a rollback. Which statement applies to a Cisco Nexus 5600 Series switch?
- A. A system checkpoint is generated automatically when the running configuration is saved to NVRAM.
- B. A user who is assigned to the network-operator user role can perform a rollback.
- C. Errors are skipped when an atomic rollback type is triggered.
- D. The configuration rollback functionality is disabled when FCoE is enabled.
正解：D
質問 # 28
An engineer is using REST API calls to configure the cisco APIC. Which data structure must be used within a post message to receive a login token?
A)
B)
C)
D)
- A. Option D
- B. Option A
- C. Option C
- D. Option B
正解：D
質問 # 29
An engineer must configure multiple EPGs on a single access port in a large Cisco ACI fabric without using VMM integration. The relevant access policies and tenant policies have been created. A single AAEP is used to configure the access port in the fabric. Which two additional steps must be taken to complete the configuration? (Choose two.)
- A. The EPGs must be configured as static ports
- B. The corresponding bridge domains must be configured in legacy mode
- C. The EPGs must link directly to the corresponding AAEP
- D. A contract must be defined between the EPGs
- E. The EPGs must be linked to the correct physical domain
正解：A、E
解説：
Attach EPG to Physical Domain (to AAEP through it) and add static ports to EPG
質問 # 30
Drag and drop the characteristics from the left onto the correct storage systems on the right.
正解：
解説：
質問 # 31
An engineer requires a solution to automate the configuration and deployment of remote network devices for a customer. The engineer must keep these considerations in mind:
* The customer's environment is based on industry-accepted standards and requires a solution that meets these standards.
* The security requirements mandate the use of a secure transport mechanism between the automation software and target devices such as SSH or TLS.
* The solution must be based on a human-readable and easy to parse format such as XML or JSON.
Which solution must be used to meet these requirements?
- A. REST API
- B. NETCONF
- C. SNMP
- D. Ansible
正解：B
解説：
Please confirm with colleagues.
質問 # 32
Refer to the exhibit.
Drag and drop each traffic flow type from the left onto the corresponding number on the right Not all traffic flow types are used
正解：
解説：
Explanation
Table Description automatically generated
質問 # 33
An engineer must remove the running configuration of a Cisco Nexus 9000 Series Switch and replace it with a backup file without restarting the switch. The backup file is stored on an SFTP server that is reachable via the An engineer must remove the running configuration mgmt0 interface Which set of commands accomplishes this task'
- A. Option C
- B. Option D
- C. Option A
- D. Option B
正解：A
質問 # 34
An engineer mus! configure the remote SSH management connectivity for Cisco Nexus 9000 Series Switches to meet these requirements
* The connectivity must be permitted from a jump host with an IP address of 10 10.10 10/24
* All switches must be permitted to connect via SSH to other devices from the subnet of 10 .20.20.0/24.
Which configuration set accomplishes these requirements?
- A. Option D
- B. Option A
- C. Option C
- D. Option B
正解：D
質問 # 35
An engineer implements SPAN configuration on an Nexus 5000 series switch. Which two commands are necessary to complete the SPAN session configuration? (Choose two)
- A. Configure the switchport mode SD under interface tc2/1.
- B. Configure the switchport monitor under interface fc2/2
- C. Configure the switchport mode SD under interface fc2/2.
- D. Configure switchport speed 4000 under interface fc2/2.
- E. Configure session type fc under monitor session 1.
正解：C、D
解説：
Explanation
https://www.cisco.com/c/en/us/td/docs/switches/datacenter/nexus5000/sw/configuration/guide/cli/ CLIConfigurationGuide/Span.html
質問 # 36
A UCS B- Series server located in B5108 chassis 1 slot 1 is currently unavailable. The server needs to be associated with a specific service profile when it becomes available. Which associate service profile option should be selected to accomplish this goal?
- A. server pool
- B. custom server
- C. restrict migration
- D. server
正解：B
解説：
https://www.cisco.com/en/US/docs/unified_computing/ucs/sw/gui/config/guide/141/ UCSM_GUI_Configuration_Guide_141_chapter28.html
質問 # 37
Refer to the exhibit.
Which type of backup is required to restore a Cisco UCS configuration?
- A. all configuration
- B. full state
- C. logical configuration
- D. system configuration
正解：D
解説：
https://www.cisco.com/c/en/us/td/docs/unified_computing/ucs/sw/cli/config/guide/1-0-2/b_CLI_Config_Guide_1-0-2/CLI_Config_Guide_1-0-2_chapter29.pdf
質問 # 38
......
Cisco 350-601認定試験は、データセンターテクノロジーの分野にある貴重な認定です。それは世界的に認識されており、雇用主から非常に尊敬されています。この試験に合格した候補者は、コアデータセンターテクノロジーの実装に習熟していることを示しているため、データセンターテクノロジーの分野での高給で挑戦的な役割を考慮する可能性が高くなります。
100%の合格率を試そう！更新されたのは350-601試験問題 [2024年更新]：https://jp.fast2test.com/350-601-premium-file.html
ベストな問題集を使おうCCNP Data Center 350-601専門試験問題：https://drive.google.com/open?id=12PPaeltbG9Q1zYMQkh3qICAW4NLCZCAh