完全版は2023年最新の350-601試験問題集テストガイドはトレーニング専門問題
試験準備と合格するための最高なカバー率問題集を提供しています これで試験準備せよ350-601
シスコの350-601試験は、約90〜110問のコンピュータベースの試験で、3時間で回答することができます。試験は、シスコテストセンターで直接受験するか、Pearson VUEプラットフォームを介してオンラインで受験することができます。試験はクローズドブックで、試験中に参考資料を使用することはできません。
シスコ350-601試験は、ネットワークデザイン、ストレージネットワーキング、自動化、セキュリティ、仮想化など、データセンターテクノロジーに関連する幅広いトピックをカバーしています。この試験は、シスコの製品やソリューションを使用してデータセンターテクノロジーを設計、実装、管理する候補者の能力を試験するために設計されています。試験には、データセンターテクノロジーの理解を試験する複数選択問題とシミュレーションが含まれています。
質問 # 136
Refer to the exhibit.
Which setting must be configured to prevent reuse of passwords?
- A. Change Count
- B. No Change Interval
- C. History Count
- D. Change Interval
正解：C
質問 # 137
An engineer must recover configuration on a Cisco MDS 9000 Series switch from a previous version that was backed up to bootflash and then verify the restoration.
Drag and drop the commands on the left to the correct order on the right.
正解：
解説：
質問 # 138
An engineer requires a solution to automate the configuration and deployment of remote network devices for a customer. The engineer must keep these considerations in mind:
* The customer's environment is based on industry-accepted standards and requires a solution that meets these standards.
* The security requirements mandate the use of a secure transport mechanism between the automation software and target devices such as SSH or TLS.
* The solution must be based on a human-readable and easy to parse format such as XML or JSON.
Which solution must be used to meet these requirements?
- A. NETCONF
- B. Ansible
- C. REST API
- D. SNMP
正解：A
解説：
Explanation
https://www.cisco.com/c/en/us/products/collateral/ios-nx-os-software/ios-xe/nb-06-cisco-ios-xe-faq-en.html
質問 # 139
An engineer must implement a Cisco UCS system at a customer site. One of the requirements is to implement SAN boot. The storage system maps the source WWPN to a unique LUN.
Which method does Cisco recommend to configure the SAN boot?
- A. Define the vHBAs as bootable and leave the boot target definition empty.
- B. Define the vHBAs as bootable and leave the default values on the boot target definition.
- C. Create a SAN boot policy in which every initiator is mapped to the same target LUN.
- D. Create a SAN boot policy in which every initiator is mapped to a different target LUN.
正解：C
解説：
Section: Storage Network
Explanation/Reference:
質問 # 140
Which two methods are available to Manage an ACI REST API session authentication when a user is unauthenticated?
- A. POST to aaaUserLogin
- B. GET aaaRefresh
- C. DELETE to aaaLogout
- D. POST to aaaLogin
- E. GET to aaaListDomains
正解：B、D
解説：
These API methods enable you to manage session authentication:
aaaLogin -Sent as a POST message, this method logs in a user and opens a session. The message body contains an aaa:User object with the name and password attributes, and the response contains a session token and cookie. If multiple AAA login domains are configured, you must prepend the user's name with apic: domain\\ .
aaaRefresh -Sent as a GET message with no message body or as a POST message with the aaaLogin message body, this method resets the session timer. The response contains a new session token and cookie.
aaaLogout -Sent as a POST message, this method logs out the user and closes the session. The message body contains an aaa:User object with the name attribute. The response contains an empty data structure.
aaaListDomains -Sent as a GET message, this method returns a list of valid AAA login domains. You can send this message without logging in.
https://www.cisco.com/c/en/us/td/docs/switches/datacenter/aci/apic/sw/2-x/rest_cfg/2_1_x/ b_Cisco_APIC_REST_API_Configuration_Guide/ b_Cisco_APIC_REST_API_Configuration_Guide_chapter_01.html
質問 # 141
Refer to the exhibit.
Which type of backup is required to restore a Cisco UCS configuration?
- A. full state
- B. system configuration
- C. logical configuration
- D. all configuration
正解：A
質問 # 142
Refer to the exhibit.
Which result of running the command is true?
- A. PIM join messages are suspended.
- B. Multicast traffic forwarding is suspended.
- C. The PIM database is deleted.
- D. MRIB is flushed
正解：C
質問 # 143
Host 1 is in VLAN 100 located is DataCenter 1 and Host2 is in VLAN200 located in DataCenter2. Which OTV VLAN mapping configuration allows Layer 2 connectivity between these two hosts?
- A. Option A
- B. Option B
- C. Option C
- D. Option D
正解：B
質問 # 144
A network administrator must create a Linux container on a Cisco Nexus Series Switch. The container requires
10 percent of the CPU of the switch and 1024 MB of RAM to run successfully. Which task provides the necessary resources?
- A. Enable the Bash shell of the switch with the feature bash command
- B. Increase the compute resources with the guestshell resize command.
- C. Modify resource allocation with the virtual-service resize command.
- D. Edit the container properties with the guestshell run command.
正解：B
質問 # 145
An engineer is implementing FCoE.
Which aspect of DCBXP on a Cisco Nexus switch affects this implementation?
- A. It requires that LLDP transmit and LLDP receive are enabled on the FCoE interface.
- B. It always is enabled on 10/100-Mbps native Ethernet ports.
- C. It provides the authentication of peers on the Cisco Nexus switch.
- D. It uses the Cisco Fabric Services protocol to exchange parameters between two peer links.
正解：A
解説：
Section: Storage Network
質問 # 146
Which Cisco network assurance engine feature helps reduce the need for Tier 1 network operation centers to escalate issues?
- A. DVR audit trails
- B. detailed runbooks
- C. operator playbooks
- D. detailed TCAM optimization
正解：B
解説：
Explanation
https://www.cisco.com/c/en/us/products/collateral/data-center-analytics/network-assurance-engine/at-a-glance-c4
質問 # 147
Refer to the exhibit.
Which statement describes the default gateway configuration of the vPC?
- A. Either switch can act as the active default gateway.
- B. N7K-2 acts as the default gateway for all traffic.
- C. N7K-1 acts as the default gateway for all traffic.
- D. N7K-2 forwards traffic that is destined for the default gateway by using the peer link.
正解：A
解説：
https://community.cisco.com/t5/networking-documents/peer-gateway-feature-on-the-nexus-7000/ta-p/3113290
質問 # 148
Which adjacency server configuration makes two OTV edge devices located in the same site bring up the dual-site adjacency?
A)
B)
C)
D)
- A. Option A
- B. Option B
- C. Option C
- D. Option D
正解：B
質問 # 149
An engineer installed a new Nexus switch with the mgm0 interface in vrf management. Connectivity to the rest of the network needs to be tested from the guest shell of the NX-OS. Which command tests connectivity from the guest shell of the NX-OS?
- A. [guestshell@guestshell ~]$ dohost ''ping vrf management 173.37.145.84''
- B. [guestshell@guestshell ~]$ chvrf management ping 173.37.145.84
- C. [guestshell@guestshell ~$ ping 173.37.145.84 vrf management
- D. [guestshell@guestshell ~]$ iping vrf management ip 173.37.145.84
正解：B
解説：
Section: Network
Explanation/Reference:
https://www.cisco.com/c/en/us/td/docs/switches/datacenter/nexus9000/sw/7-x/programmability/guide/ b_Cisco_Nexus_9000_Series_NX-OS_Programmability_Guide_7x/Guest_Shell.html
質問 # 150
A Cisco ACI engineer must configure an access port on a Cisco ACI leaf switch. The access policy should be configured so that it supports L30ut connectivity concurrently with several EPGs that are mapped to this interface with the static port method. How should the access policy be configured?
- A. by linking the interface policy group to multiple Attachable Access Entity Profiles
- B. by mapping a single physical domain, mapped to the L3out and EPG interfaces
- C. with two interface policy groups that are linked to the same interface profile port selector
- D. with a single Attachable Access Entity Profile that is linked to the corresponding routed domain and physical domain
正解：B
質問 # 151
Refer to the exhibit.
An engineer is implementing zoning on two Cisco MDS switches. After the implementation is finished, E Ports that connect the two Cisco MDS switches becomes isolated. What is wrong with the implementation?
- A. Zones must have the same name on both MDS switches for the E ports to function.
- B. Different zone set names must be configured on both MDS switches.
- C. E Ports on both MDS switches must be configured as F ports for the zoning to function.
- D. Zones are local to the MDS switch and name service must be used to activate the connection between E ports.
正解：A
質問 # 152
Which communication method does NFS use for requests between servers and clients?
- A. SMB
- B. PRC
- C. SSC
- D. XDR
正解：B
質問 # 153
......
Cisco 350-601 認定試験の出題範囲：
| トピック | 出題範囲 |
|---|---|
| トピック 1 |
|
| トピック 2 |
|
| トピック 3 |
|
| トピック 4 |
|
| トピック 5 |
|
| トピック 6 |
|
| トピック 7 |
|
| トピック 8 |
|
検証された材料は決まってこれ350-601：https://jp.fast2test.com/350-601-premium-file.html
合格するために必要な350-601試験問題集：https://drive.google.com/open?id=12PPaeltbG9Q1zYMQkh3qICAW4NLCZCAh