最新の2024年01月 Cisco 350-601問題集で更新された455問あります
PDF無料ダウンロードには350-601有効な練習テスト問題
Cisco 350-601試験は、主にネットワーク管理者、ネットワークエンジニア、システム管理者、データセンターアーキテクトなどのデータセンターの専門家を対象としています。この試験は、仮想化、自動化、ネットワークセキュリティなどのデータセンターテクノロジーを実装および管理する候補者の能力をテストするように設計されています。試験は、複数の選択の質問、シミュレーション、およびドラッグアンドドロップの質問で構成されており、候補者は試験を完了するために120分かかります。
質問 # 178
An engineer must configure a VDS port group using APIC policy. The requirements are for the frames to be mapped to a particular Layer 2 network and for the virtual machine assigned to the port group to receive all frames passed on the virtual switch. Which two settings must be used to meet these requirements? (Choose two.)
- A. forged transmits
- B. promiscuous mode
- C. VLAN
- D. VMDirectPath
- E. port binding
正解：B、E
質問 # 179
An engineer is implementing FCoE. Which aspect of DCBXP on a Cisco Nexus switch affects this implementation?
- A. It requires that LLDP transmit and LLDP receive are enabled on the FCoE interface.
- B. It always is enabled on 10/100-Mbps native Ethernet ports.
- C. It provides the authentication of peers on the Cisco Nexus switch.
- D. It uses the Cisco Fabric Services protocol to exchange parameters between two peer links.
正解：A
質問 # 180
An engineer must export the Cisco UCS Manager configuration for backup purposes. The requirement is to export the configuration that contains the AAA and RBAC configuration Also the file must be stored a human-readable format 'Much backup type must be selected to meet these requirements?
- A. logical configuration
- B. all configuration
- C. system configuration
- D. fun state
正解：C
質問 # 181
Refer to the exhibit.
An engineer must distribute all the host ports to use all eight configured FEX uplinks. The solution must minimize disruption if an uplink fails Which action accomplishes this objective?
- A. Statically assign each host interface to a fabric uplink
- B. Change the supported FEX type
- C. Configure the eight uplinks in a port channel
- D. Set the pinning max-links value to 8
正解：C
質問 # 182
What occurs when running the command install deactivate <filename> while a software maintenance upgrade is performed on a Cisco Nexus 9000 Series switch?
- A. The current upgrade stops.
- B. The package is removed from the switch.
- C. The package features for the line card are disabled.
- D. The current set of packages is committed.
正解：C
質問 # 183
Host 1 is in VLAN 100 located is DataCenter 1 and Host2 is in VLAN200 located in DataCenter2. Which OTV VLAN mapping configuration allows Layer 2 connectivity between these two hosts?
- A. Option A
- B. Option D
- C. Option B
- D. Option C
正解：C
質問 # 184
An engineer implements an ACI fabric and must implement microsegmentation of endpoints within the same IP subnet using a network-based attribute. The attribute mapping must allow IP subnet independence. Which attribute must be selected?
- A. MAC address
- B. Tag
- C. IP
- D. Custom
正解：C
解説：
If you want to use a network-based attribute and classify IP addresses in the same subnet, you must use the MAC-based network attribute. IP-based microsegmented EPGs do not support classification for IP addresses in the same subnet. https://www.cisco.com/c/en/us/td/docs/switches/datacenter/aci/apic/sw/3-x/virtualization/b_ACI_Virtualization_Guide_3_1_1/b_ACI_Virtualization_Guide_3_1_1_chapter_0100.html
質問 # 185
An engineer must configure RBAC is Cisco UCS Manager in an existing data center environment. Which two roles can be used to configure LAN Connectivity policies? (Choose two.)
- A. enable
- B. server-profile
- C. operations
- D. network-admin
- E. admin
正解：B、D
質問 # 186 
Refer to the exhibit. An engineer must configure FCoE on a Cisco Nexus switch. Which two command sets complete this configuration? (Choose two.)
- A. vsan database
vsan 10 interface ethernet 1/3 - B. interface fcoe 10
bind interface ethernet 1/3
no shut - C. interface vfc 10
bind interface ethernet 1/3
no shut - D. interface vfc 10
bind interface fcoe-vfc 1/3
no shut - E. vsan database
vsan 10 interface vfc 10
正解：C、E
解説：
Section: Storage Network
質問 # 187
Refer to the exhibit.
An engineer is configuring a VSAN on the network Which option must be selected to create the VSAN?
- A. FC Zoning Enabled
- B. Common/Global
- C. Fabric A
- D. Fabric B
正解：C
質問 # 188
An engineer must configure OSPF in the data center. The external routes have already been redistributed OSPF. The network must meet these criteria:
* The data centre servers must reach services in the cloud and the services behind the redistributed routes.
* The exit point toward the internet should be propagated only when there is a dynamically learned default route from the upstream router.
Which feature is required?
- A. Default-information originate
- B. Stubby area
- C. Default-information originate always
- D. Totally stubby area
正解：A
解説：
https://learningnetwork.cisco.com/s/question/0D53i00000Kt544/defaultinformationoriginate-always
質問 # 189
Which NFS version uses the TCP protocol and needs only one IP port to run the service?
- A. NFSv4
- B. NFSv2
- C. NFSv1
- D. NFSv3
正解：A
質問 # 190
An engineer needs to Implement a solution that prevents loops from occurring accidentally by connecting a switch to interface Ethemet1/1. The port Is designated to be used tor host connectivity. What configuration should be implemented?
- A. Option A
- B. Option D
- C. Option B
- D. Option C
正解：D
質問 # 191
An engineer must perform a nondisruptive software upgrade on a dual supervisor Cisco Nexus 7000 series switch. What is the cause of the upgrade being disruptive?
- A. The kickstart image is installed by using the Install all kickstart image system image command
- B. Attempt to simultaneously upgrade more than three cards
- C. The show install all impact command is not issued before the upgrade
- D. Change to the configuration settings or the network connections during the upgrade process
正解：D
質問 # 192
A network architect considers a Cisco HyperFlex design solution for a company. The proposed solution is for a virtual environment that is not performance-sensitive, but the solution must have high storage capacity and a low cost. Which Cisco HyperFlex storage configuration should be used?
- A. All-SAN
- B. Hybrid
- C. All-NVMe
- D. All-Flash
正解：B
解説：
https://www.cisco.com/c/en/us/products/collateral/hyperconverged-infrastructure/hyperflex-hx-series/white-paper-c11-744026.html Hybrid contains HDD for capacity.
質問 # 193
Which mroute state is created when Bidirectional PIM is deployed at a site?
- A. MVPN Type-6
- B. *,G
- C. MVPN Type-7
- D. S,G
正解：B
解説：
Bidirectional PIM has been invented for networks where we have many sources and receivers talking to each other. PIM Sparse mode RP builds 2 entries *, G and S, G but when we use PIM bidirectional mode, the RP will never build a S,G entry and, it only allow the *,G entry. https://www.cisco.com/c/en/us/td/docs/ios-xml/ios/ipmulti_pim/configuration/xe-16-5/imc-pim-xe-16-5-book/imc-tech-oview.html and https://networklessons.com/multicast/multicast-bidirectional-pim
質問 # 194
Drag and drop the characteristics from the left onto the correct storage systems on the right.
正解：
解説：
Explanation
Graphical user interface Description automatically generated with medium confidence
2,4,5 - NAS 1,3 - SAN
質問 # 195
Which statement about the impact of a rolling EPLD upgrade on a Cisco MDS 9000 Series Switch is true?
- A. All modules on the switch are disrupted.
- B. An EPLD upgrade is nondisruptive.
- C. The upgrade can be performed from the standby supervisor module.
- D. Only the modules that are being upgraded are disrupted.
正解：D
解説：
Section: Compute
Explanation/Reference:
質問 # 196
What are two capabilities of the Cisco Network Assurance Engine? (Choose two.)
- A. It predicts the network load on a data center.
- B. It validates that devices comply with network security policies.
- C. It predicts the impact of changes to the network.
- D. It ensures that network performance meets an SLA.
- E. It verifies the speed of network packet flows by using telemetry.
正解：B、C
解説：
- Predict the impact of network changes
- Verify network-wide behavior
- Ensure network security policy and compliance
https://www.cisco.com/c/en/us/products/collateral/data-center-analytics/network-assurance-engine/at-a-glance-c45-740230.html
質問 # 197
Refer to the exhibit.
Which statement describes the default gateway configuration of the vPC?
- A. Either switch can act as the active default gateway.
- B. N7K-2 acts as the default gateway for all traffic.
- C. N7K-1 acts as the default gateway for all traffic.
- D. N7K-2 forwards traffic that is destined for the default gateway by using the peer link.
正解：A
解説：
https://community.cisco.com/t5/networking-documents/peer-gateway-feature-on-the-nexus-7000/ta-p/3113290
質問 # 198
Refer to the exhibit.
What is configured as a result of running these commands?
- A. strict unicast RPF
- B. reverse lookup for outbound packets
- C. IP Source Guard
- D. loose unicast RPF
正解：A
質問 # 199
......
350-601テストエンジンお試しセット、350-601問題集PDF：https://jp.fast2test.com/350-601-premium-file.html
最新のCisco 350-601PDFと問題集で（2024）無料試験問題解答はここ：https://drive.google.com/open?id=12PPaeltbG9Q1zYMQkh3qICAW4NLCZCAh