[2024年03月31日] 信頼され続ける2V0-41.20試験のコツがあるPDF試験材料
2024年最新の2V0-41.20テスト解説（更新されたのは95問があります)
VMware 2V0-41.20認定試験は、VMware NSX-Tデータセンターテクノロジーの専門知識を実証したい個人向けに設計された専門レベルの認定です。この試験は、仮想化、ネットワーキング、セキュリティの概念を十分に理解している経験豊富なIT専門家を対象としています。この認定試験は、NSX-Tデータセンター環境の設計、展開、管理、トラブルシューティングに必要なスキルと知識を検証します。
VMware 2V0-41.20は、VMware NSX-Tデータセンターテクノロジーでスキルを実証したい専門家向けに設計された試験です。これは、仮想化ソフトウェアとサービスの大手プロバイダーであるVMwareが実施した認定試験です。この試験は、NSX-Tデータセンターテクノロジーの知識をすでに獲得しており、スキルを検証したい人を対象としています。
質問 # 13
When deploying east-west network introspection, which Service Virtual Machine (SVM) deployment method achieves the least amount of traffic hairpinning?
- A. Add partner SVMs to an edge cluster.
- B. Create a secondary vNIC on each quest VM for SVM communication.
- C. Place a partner SVM on each compute cluster node.
- D. Centralize partner SVMs in a service cluster.
正解：B
質問 # 14
Which three teaming policy modes are supported by NSX-T Data Center? (Choose three.)
- A. Destination MAC
- B. Destination Port
- C. Failover Order
- D. Load Balanced Source
- E. Load Balanced Source IP
- F. Load Balanced Source MAC
正解：C、D、F
質問 # 15
Which two ports are used by a transport node to communicate with the management and control planes in NSX-T Data Center 3.0? (Choose two.)
- A. 0
- B. 1
- C. 2
- D. 3
- E. 4
正解：C、E
解説：
The NSX Manager management plane communicates with the transport nodes by using APH Server over NSX-RPC/TCP through port 1234. CCP communicates with the transport nodes by using APH Server over NSX-RPC/TCP through port 1235. Taken from NSX-T ICM 3.0 Lecture manual
質問 # 16
An NSX administrator has configured a KVM hypervisor as a transport node.
Which kernel module on KVM implements a N-VDS?
- A. etherswitch
- B. openvswitch
- C. nsx-vswitch
- D. dvswitch
正解：B
質問 # 17
An NSX administrator has configured a load balancer virtual server on a Tier-1 Gateway.
In order to advertise the load balancer virtual IP to the Tier-0 Gateway, which route advertisement configuration has to be done on the Tier-1 Gateway? (Choose two.)
- A. Advertise All LB SNAT IP Routes
- B. Advertise All LB VIP Routes
- C. All Static Routes
- D. Advertise All NAT Routes
- E. Information
正解：A、B
解説：
Explanation
https://docs.vmware.com/en/VMware-NSX-T-Data-Center/3.0/administration/GUID-EEBA627A-0860-477A-95
質問 # 18
How is the RouterLink port created between a Tier-1 Gateway and Tier-0 Gateway?
- A. Automatically created when Tier-1 is created.
- B. Automatically created when Tier-1 is connected with Tier-0 from NSX UI.
- C. Manually create a Segment and connect to both Tier-1 and Tier-0 Gateways.
- D. Manually create a Logical Switch and connect to bother Tier-1 and Tier-0 Gateways.
正解：B
解説：
Reference:
https://docs.vmware.com/en/VMware-NSX-T-Data-Center/3.0/administration/GUID-3F163DEE-1EE6-4D80-BEBF-8D109FDB577C.html
質問 # 19
Which two BGP configuration parameters can be configured in the VRF Lite gateways? (Choose two.)
- A. Graceful Restart
- B. Local AS
- C. Route Aggregation
- D. BGP Neighbors
- E. Route Distribution
正解：C、D
解説：
The following parameters are inherited from the default Tier-0 gateway and cannot be modified at the VRF level:
* Local AS
* Graceful restart
* Graceful restart timer
* Graceful restart stale timer
* Multipath relax
Inter-SR iBGP is not supported in VRF gateways.
BGP can be enabled or disabled per VRF gateway.
Route aggregation and BGP neighbors are local configurations per VRF.
質問 # 20
Which three services are compatible with VRF Lite? (Choose three.)
- A. DHCP
- B. NAT
- C. Load Balancer
- D. VPN
- E. Intrusion Detection
正解：A、B、E
解説：
VRF Lite is not compatible with the following services:
-VPN
-Load Balancer
Taken from NSX-T ICM 3.0 Lecture Manual.
質問 # 21
Refer to the exhibit.
Which NAT type must the NSX-T Data Center administrator create on the Tier-0 or Tier-1 Gateway to allow Web VM to initiate communication with public networks?
- A. DNAT
- B. Reverse NAT
- C. SNAT
- D. 1:1 NAT
正解：C
質問 # 22
Which three different transport nodes could be configured in the data plane? (Choose three.)
- A. VM or Bare Metal NSX Edge
- B. Bare Metal server
- C. ESXi and Hyper-V
- D. ESXi and KVM
- E. NSX Edge VM on KVM
- F. vShield Edge VM
正解：A、B、D
質問 # 23
An NSX administrator has configured a load balancer virtual server on a Tier-1 Gateway.
In order to advertise the load balancer virtual IP to the Tier-0 Gateway, which route advertisement configuration has to be done on the Tier-1 Gateway? (Choose two.)
- A. Advertise All LB VIP Routes
- B. All Static Routes
- C. Advertise All NAT Routes
- D. Advertise All LB SNAT IP Routes
- E. Information
正解：A、C
質問 # 24
How is the intra-tier transit link connection created between SR and DR for a Tier-0 Gateway?
- A. Automatically created when SR is initialized.
- B. Manually create external uplink interface and mark it as transit.
- C. Automatically created when DR is created.
- D. Manually create a gateway interface and mark it as transit.
正解：A
解説：
Reference: https://blogs.vmware.com/networkvirtualization/2018/01/nsx-t-routing-part-2.html/
質問 # 25
Which network virtualization technologies can be used with an Ethernet VPN (EVPN) deployment in NSX-T Data Center? (Choose two.)
- A. Multiprotocol Label Switching (MPLS)
- B. Virtual Routing and Forwarding (VRF)
- C. Open Shortest Path First (OSPF)
- D. Multiprotocol Border Gateway Protocol (MP-BGP)
- E. Virtual Extensible Local Area Network (VXLAN)
正解：D、E
質問 # 26
Which CLI command does an NSX administrator run on the NSX Manager to generate support bundle logs if the NSX UI is inaccessible?
- A. set support-bundle file vcpnv.tgz
- B. get support-bundle file vcpnv.tgz
- C. vm-support
- D. esxcli system syslog config logger set --id=nsxmanager
正解：B
解説：
Explanation
https://vdc-download.vmware.com/vmwb-repository/dcr-public/cc42e3c1-eb34-4567-a916-147e79798957/82646
質問 # 27
A DevOps user has deployed a Kubernetes Pod in vSphere.
What does the term ClusterIP represent within NSX-T?
- A. Deployment of T1 with NLB service.
- B. Deployment of Distributed Router.
- C. Deployment of Distributed Load Balancing service.
- D. Deployment of T0 and T1
正解：C
質問 # 28
Which three protocols could an NSX administrator use to transfer log messages to a remote log server? (Choose three.)
- A. SSL
- B. HTTPS
- C. TLS
- D. SSH
- E. TCP
- F. UDP
正解：C、E、F
質問 # 29
An NSX administrator would like to export syslog events that capture messages related to NSX host preparation events.
Which message ID (msgid) should be used in the syslog export configuration command as a filter?
- A. FABRIC
- B. SYSTEM
- C. MONITORING
- D. GROUPING
正解：A
解説：
https://docs.vmware.com/en/VMware-NSX-T-Data-Center/3.0/nsxt_30_admin.pdf
質問 # 30
......
VMware 2V0-41.20 認定試験は、VMware NSX-T Data Centerの専門知識を証明したいプロフェッショナルにとって、必要不可欠な資格です。この試験に合格することで、候補者は仮想化されたネットワーク環境の設計、展開、構成、管理に関する知識とスキルを証明することができます。適切な準備と学習資料を活用することで、候補者は試験に合格する確率を高め、仮想化とネットワークセキュリティの分野でキャリアを発展させることができます。
2V0-41.20認定ガイドPDFは100%カバー率でリアル試験問題：https://jp.fast2test.com/2V0-41.20-premium-file.html
2V0-41.20試験問題集を提供していますVMware問題：https://drive.google.com/open?id=1x1p8GXA9G23Q1aAeE2idfn7YPQ830nTP