[2023年更新]2V0-41.20はVCP-NVリアルな無料試験練習テスト
無料VCP-NV 2V0-41.20試験問題を提供します
VMware 2V0-41.20試験は、ネットワーク仮想化とセキュリティのキャリアアップを目指す個人にとって貴重な認定資格です。特に、仮想化環境の管理とセキュリティに責任を持つネットワーク管理者、ネットワークエンジニア、セキュリティプロフェッショナルにとって特に有益です。この試験に合格することで、受験者はNSX-T Data Centerに関する専門知識を証明し、雇用主やクライアントからの信頼性を高めることができます。
VMware 2V0-41.20認定を取得することは、ITプロフェッショナルにとって、求人機会の増加、高い給与、および改善された業務パフォーマンスなど多くの利点があります。この認定は、医療、金融、政府など様々な産業の雇用主に高く評価されています。さらに、この認定により、ITプロフェッショナルは仮想化やネットワーク管理の最新のトレンドや技術について常に最新の知識を持ち、求人市場で競争力を維持し続けることができます。
VMware 2V0-41.20 認定試験は、VMware NSX-T Data Centerの専門知識を証明したいプロフェッショナルにとって、必要不可欠な資格です。この試験に合格することで、候補者は仮想化されたネットワーク環境の設計、展開、構成、管理に関する知識とスキルを証明することができます。適切な準備と学習資料を活用することで、候補者は試験に合格する確率を高め、仮想化とネットワークセキュリティの分野でキャリアを発展させることができます。
質問 # 20
Which NSX CLI command is used to check the GENEVE tunnel status on ESXi transport node?
- A. get host-switch <Host-Switch-Name> tunnels
- B. get host-switch <Host-Switch-Name> tunnel status
- C. get transport-node tunnel status
- D. get transport-node tunnel state
正解：A
解説：
Explanation
https://vdc-download.vmware.com/vmwb-repository/dcr-public/cc42e3c1-eb34-4567-a916-147e79798957/82646
質問 # 21
Which discovery protocol is supported for hypervisor transport nodes?
- A. Cisco Discovery Protocol
- B. Adobe Real-time CDP
- C. Neighbor Discovery Protocol
- D. Link Layer Discovery Protocol
正解：D
質問 # 22
Which three steps must be carried out to configure North-South / East-West Network Inspection? (Choose three.)
- A. Service Deployment
- B. Service Registration
- C. Service Insertion
- D. Service Consumption
- E. Service Introspection
正解：A、C、E
質問 # 23
What are the advantages of using a Tier-0 Gateway in ECMP mode? (Choose two.)
- A. traffic predictability
- B. stateful services leveraged
- C. Failover of services
- D. increased north/south bandwidth
- E. traffic load balancing
正解：D、E
質問 # 24
Which TraceFlow traffic type should an NSX administrator use for validating connectivity between App and DB virtual machines that reside on different segments?
- A. Anycast
- B. Multicast
- C. Unicast
- D. Broadcast
正解：C
質問 # 25
When deploying east-west network introspection, which Service Virtual Machine (SVM) deployment method achieves the least amount of traffic hairpinning?
- A. Create a secondary vNIC on each quest VM for SVM communication.
- B. Add partner SVMs to an edge cluster.
- C. Place a partner SVM on each compute cluster node.
- D. Centralize partner SVMs in a service cluster.
正解：C
解説：
Explanation
"For SVMs deployed on compute hosts, an SVM does not need to be installed on every host. Some customers prefer to deploy the partner SVM on each host to achieve the least amount of traffic hairpinning. When the partner SVM is deployed in a service cluster, traffic is sent from the compute hosts across the overlay to the hosts in the service cluster."
質問 # 26
Which CLI command is used to disable SSH timeout on NSX Manger and NSX Edge nodes?
- A. set esxcli ssh session off
- B. nsxcli ssh session on
- C. set cli ssh timeout 0
- D. set cli-timeout 0
正解：D
質問 # 27
An NSX administrator has configured a load balancer virtual server on a Tier-1 Gateway.
In order to advertise the load balancer virtual IP to the Tier-0 Gateway, which route advertisement configuration has to be done on the Tier-1 Gateway? (Choose two.)
- A. Information
- B. All Static Routes
- C. Advertise All LB VIP Routes
- D. Advertise All LB SNAT IP Routes
- E. Advertise All NAT Routes
正解：C、D
解説：
Reference:
https://docs.vmware.com/en/VMware-NSX-T-Data-Center/3.0/administration/GUID-EEBA627A-0860-477A-95A7-7645BA562D62.html
質問 # 28
Refer to the exhibit.
Which NAT type must the NSX-T Data Center administrator create on the Tier-0 or Tier-1 Gateway to allow Web VM to initiate communication with public networks?
- A. Reverse NAT
- B. SNAT
- C. DNAT
- D. 1:1 NAT
正解：B
質問 # 29
An NSX administrator would like to export syslog events that capture messages related to NSX host preparation events.
Which message ID (msgid) should be used in the syslog export configuration command as a filter?
- A. SYSTEM
- B. GROUPING
- C. MONITORING
- D. FABRIC
正解：D
解説：
Reference:
https://docs.vmware.com/en/VMware-NSX-T-Data-Center/3.0/nsxt_30_admin.pdf
質問 # 30
Which two BGP configuration parameters can be configured in the VRF Lite gateways? (Choose two.)
- A. Graceful Restart
- B. Route Aggregation
- C. Route Distribution
- D. BGP Neighbors
- E. Local AS
The following parameters are inherited from the default Tier-0 gateway and cannot be modified at the VRF level:
* Local AS
* Graceful restart
* Graceful restart timer
* Graceful restart stale timer
* Multipath relax
Inter-SR iBGP is not supported in VRF gateways.
BGP can be enabled or disabled per VRF gateway.
Route aggregation and BGP neighbors are local configurations per VRF.
正解：B、D
質問 # 31
An NSX administrator noticed that the nsxcli command times out after 600 secs of idle time.
Which CLI command disables the nsxcli time out value on NSX Manager?
- A. set cli-timeout enabled
- B. set cli-timeout 1
- C. set cli-timeout disabled
- D. set cli-timeout 0
正解：D
解説：
Reference:
" https://vdc-download.vmware.com/vmwb-repository/dcr-public/cc42e3c1-eb34-4567-a916-147e79798957/8264605c-a5e1-49a8-b603-cc78621eeeab/cli.html#set%20cli-timeout%20%3Ctimeout%3E
https://www.virten.net/2020/06/quick-tip-remove-nsx-t-ssh-and-http-session-timeout/
質問 # 32
An NSX administrator is using ping to check connectivity between VM1 running on ESXi1 to VM2 running on ESXi2. The ping tests fails. The administrator knows the maximum transmission unit size on the physical switch is 1600.
Which command does the administrator use to check the VMware kernel ports for tunnel end point communication?
- A. esxcli network diag ping -I vmk0 -H <destination IP address>
- B. esxcli network diag ping -H <destination IP address>
- C. vmkping ++netstack=geneve -d -s 1572 <destination IP address>
- D. vmkping ++netstack=vxlan-d -s 1572 <destination IP address>
正解：D
質問 # 33
Which two choices are solutions of the NSX portfolio (Choose two.)?
- A. vRealize Network Insight
- B. NSX Service Mesh
- C. NSX Distributed IDS/IPS
- D. Tanzu Kubernetes Grid
- E. vRealize Automation
正解：B、C
質問 # 34
How is the RouterLink port created between a Tier-1 Gateway and Tier-0 Gateway?
- A. Manually create a Logical Switch and connect to bother Tier-1 and Tier-0 Gateways.
- B. Automatically created when Tier-1 is created.
- C. Manually create a Segment and connect to both Tier-1 and Tier-0 Gateways.
- D. Automatically created when Tier-1 is connected with Tier-0 from NSX UI.
正解：D
解説：
https://docs.vmware.com/en/VMware-NSX-T-Data-Center/3.0/administration/GUID-3F163DEE-1EE6-4D80-BEBF-8D109FDB577C.html
質問 # 35
Which three steps must be carried out to configure North-South / East-West Network Inspection? (Choose three.)
- A. Service Introspection
- B. Service Deployment
- C. Service Insertion
- D. Service Consumption
- E. Service Registration
正解：B、D、E
解説：
Use these steps to configure north-south and east-west Network Introspection:
1. Service Registration: Service registration makes a service available in the catalog.
2. Service Deployment: Deploy an instance of a registered service.
3. Service Consumption: Use services in a service chain and redirect traffic.
Taken from NSX-T ICM 3.0 Lecture Manual.
質問 # 36
Which log is used to see a failed NSX-T installation of a VIB package on ESXi transport nodes?
- A. /var/log/syslog.log
- B. /var/l og/hostd. log
- C. /var/log/vmware/eam/eam.log
- D. /var/log/esxupdate.log
正解：A
質問 # 37
How many IPs are required when deploying a highly available NSX Management Cluster with VIP in a production environment?
- A. 0
- B. 1
- C. 2
- D. 3
正解：A
質問 # 38
Which two statements describe the characteristics of an Edge Cluster in NSX-T 3.0 Data Center? (Choose two.)
- A. must have only active-active edge nodes
- B. must contain only one type of edge nodes (VM or bare metal)
- C. can have a maximum of 8 edge nodes
- D. can have a maximum of 10 edge nodes
- E. can contain multiple types of edge nodes (VM or bare metal)
正解：D、E
解説：
Explanation
質問 # 39
Which three teaming policy modes are supported by NSX-T Data Center? (Choose three.)
- A. Destination Port
- B. Failover Order
- C. Load Balanced Source
- D. Load Balanced Source MAC
- E. Load Balanced Source IP
- F. Destination MAC
正解：B、C、D
質問 # 40
What are the advantages of using a Tier-0 Gateway in ECMP mode? (Choose two.)
- A. traffic predictability
- B. stateful services leveraged
- C. Failover of services
- D. increased north/south bandwidth
- E. traffic load balancing
正解：D、E
解説：
Explanation
From ICM manual:
Equal-cost multipath (ECMP) routing has several features and functions: * ECMP routing increases the north-south communication bandwidth by combining multiple uplinks.
* ECMP routing performs traffic load balancing.
* ECMP routing provides fault tolerance for failed paths.
* A maximum of eight ECMP paths are supported.
* Hashing is based on 2-tuple IP source and destination addresses.
* ECMP routing is only available on Tier-0 gateways.
質問 # 41
What are three characteristics of a transport zone? (Choose three.)
- A. optional for creating a segment
- B. configured with multiple N-VDS
- C. defines the potential reach of transport nodes
- D. defines the scope and reachability of a Segment
- E. configured with a Single N-VDS
正解：C、D、E
解説：
https://docs.vmware.com/en/VMware-NSX-T-Data-Center/2.3/com.vmware.nsxt.install.doc/GUID-F47989B2-2B9D-4214-B3BA-5DDF66A1B0E6.html
質問 # 42
What are two types of supported IPSec VPNs in NSX-T Data Center? (Choose two.)
- A. SSL based IPSec VPN
- B. Open source based IPSec VPN
- C. route-based IPSec VPN
- D. Layer-7 based IPSec VPN
- E. policy-based IPSec VPN
正解：C、E
質問 # 43
......
VMware 2V0-41.20リアルな問題と知能問題集：https://jp.fast2test.com/2V0-41.20-premium-file.html
2V0-41.20問題集でVCP-NV高確率練習問題集：https://drive.google.com/open?id=1x1p8GXA9G23Q1aAeE2idfn7YPQ830nTP